Pneumatic Hose Fittings

Male Y Brass Pneumatic Quick Connect Coupling 1/8' 1/4' 3/8' 1/2' Pneumatic push in fittings, also called push to connect fittings, provide a leak-free means of easily connecting hoses in your compressed air system. Fittings can have between 1-6 inlet/outlet ports or may have additional functionality such as an integrated pressure gauge or silencer. The greatest advantage of push in fittings is the quick release system which allows for simple and easy installation by hand,

Male Y Swivel Brass Pneumatic Quick Coupling 4mm 6mm 8mm 10mm 12mm Push to connect fittings have ends that are designed to accept tubing by pushing it into the end. These fittings typically disconnect via some type of collar retraction. Push to connect fittings are convenient for sections of the system requiring frequent disconnection and reconnection. BRANDO offers Push to Connect fittings in a variety of configurations; Male Connectors, Female Connectors, 90° Elbows, Unions

Brass Male 90 Degree Elbow Pneumatic Hose Fittings 1/8' 1/4' 3/8' 1/2' BRANDO's metal push to connect fittings are specially designed for quick tubing connection and disconnection. Precision machined from premium quality brass and stainless steel materials, our metal push to connect fittings are available in a variety of male and female connector, elbow, and tee configurations. Numerous sizes are available to accommodate tubing ODs from 1/8' to 1/2'. Technical data of

PMF Bulkhead Female Straight Pneumatic Push-In Fittings 1/8' 1/4' 3/8' 1/2' Push to connect pneumatic straight connection fittings enable quick tubing connection and disconnection. These pneumatic components feature stainless steel gripping collets and internal O-rings to ensure a leakproof proper fit. Additionally, the quick-connect collet prevents the tube from being released through a connection that can be released through the push of a button. Most popular straight push

PCF Female Straight Pneumatic Push In Fittings 6mm 8m 10mm 12mm Push to connect fittings have ends that are designed to accept tubing by pushing it into the end. These fittings typically disconnect via some type of collar retraction. Push to connect fittings are convenient for sections of the system requiring frequent disconnection and reconnection. BRANDO offers Push to Connect fittings in a variety of configurations; Male Connectors, Female Connectors, 90° Elbows, Unions

PCF Female Straight Pneumatic Push To Connect Fittings 1/8' 1/4' 3/8' 1/2' BRANDO Pneumatic push to connect fittings are design with a releasable stainless steel grab-ring to grip nylon or polyurethane air line tubing (85 or 95 durometer). Release buttons allow for quick assembly and release, a true Push-to-Connect design.The brass components are nickel plated and pre-applied sealant is used on all tapered threads and recessed captive o-rings on all parallel threads. Internal

PCF Female Straight Push Fit Pneumatic Hose Fittings 1/8' 1/4' 3/8' 1/2' Common technical parameters and features of pneumatic hose fittings: 1. Retain tightness automatically after inserting the hose. 2. Body made of high-quality polyamide (PA 66) and nickel-plated brass. 3. Seals: NBR. 4. Working temperature from 0°C up to 60°C. 5. Working pressure from 0 to 8 bar. 6. Fittings with external thread have a sealing layer, so you don't need to use any adhesives. 7. Perfect for

PCF Female Straight Pneumatic Hose Fittings Quick Connect 3/8' 1/2' Pneumatic push in fittings are a type of quick connect fitting which allow for an air or water or any other pneumatic circuit line to be enabling quick, manual connection and disconnection with calibrated hoses.Pneumatic push in fittings have various types of connections, including elbows, straight fittings, reducing fittings, tees, equal crosses, and many many more. BRANDO connector line includes inch and

PCF Female Straight Pneumatic Hose Fittings Push To Connect 1/8' 1/4' Most popular straight push-in fittings with male or female threads. Fittings have hexagonal body allowing tightening with wrench, additionally our fittings can be screwed with tool, which is especially convenient where there is limited access to installation place. In this category you can find push-in fittings with threads in following sizes: M5, 1/8', 1/4', 3/8' and 1/2' for hoses with diameter from 4 mm

PMM Bulkhead Union Pneumatic Quick Fittings 1/8' 1/4' 3/8' 1/2' Bulkhead union push-in fittings. Classical bulkhead union with push-in fittings on each side. Bulkhead connections are used when there is a need to move pneumatic tube through some obstacle. Simply drill a hole, push one part of bulkhead through it, and then screw second part onto the other side. Available for all common pneumatic tube diameters. BRANDO offers plastic push in fittings , which is also called

PMM Bulkhead Union Pneumatic Hose Fittings 1/8' 1/4' 3/8' 1/2' BRANDO offer a convenient push-in fitting system for compressed air and water with over 1000+ types of standard and function fittings. These high quality, male threaded to tube adapters offer a variety of Metric, G parallel or R tapered threads and diameters to suit each and every connection. Characteristic: 1. One-touch tube fittings are used in pneumatic piping. 2. The tube fittings come in a wide variety of

PMF Bulkhead Female Straight Pneumatic Hose Fittings 1/8' 1/4' 3/8' 1/2' Most popular straight push-in fittings with male or female threads. Fittings have hexagonal body allowing tightening with wrench, additionally our fittings can be screwed with tool, which is especially convenient where there is limited access to installation place. In this category you can find push-in fittings with threads in following sizes: M5, 1/8', 1/4', 3/8' and 1/2' for hoses with diameter from 4

PUT Union Tee Push Fit Pneumatic Quick Connect Fittings 1/8' 1/4' 3/8' 1/2' Push-to-connect fittings have ends that are designed to accept tubing by pushing it into the end. These fittings typically disconnect via some type of collar retraction. Push to connect fittings are convenient for sections of the system requiring frequent disconnection and reconnection. BRANDO offers Push to Connect fittings in a variety of configurations; Male Connectors, Female Connectors, 90°

PL Male Elbow Push On Pneumatic Quick Fittings 1/8' 1/4' 3/8' 1/2' Push in fittings (pneumatic fittings, push to connect fittings, one touch fittings) are made of nickel plated brass (thread) and plastic (body), stainless steel tube gripping claws, collars and POM release sleeves offer a quick hold and release mechanism to provide a low disconnection force for easy removal of the tubing. To assemble the tube, simply insert the tube into the fitting until it bottoms. To

PCF Female Straight Push-In Pneumatic Hose Fittings 1/8' 1/4' 3/8' 1/2' Most popular straight push-in fittings with male or female threads. Fittings have hexagonal body allowing tightening with wrench, additionally our fittings can be screwed with tool, which is especially convenient where there is limited access to installation place. In this category you can find push-in fittings with threads in following sizes: M5, 1/8', 1/4', 3/8' and 1/2' for hoses with diameter from 4

PMM Bulkhead Union Pneumatic Hose Fittings 1/8' 1/4' 3/8' 1/2' Bulkhead union push-in fittings. Classical bulkhead union with push-in fittings on each side. Bulkhead connections are used when there is a need to move pneumatic tube through some obstacle. Simply drill a hole, push one part of bulkhead through it, and then screw second part onto the other side. Available for all common pneumatic tube diameters. BRANDO’s push to connect fittings (or push-in fittings) are a quick

PUC Union Straight Plastic Pneumatic Tube Fittings 1/8' 1/4' 3/8' 1/2' Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without using tools. The tightness of the tube takes place through an elastic clamp which holds the tube on the external diameter and releases it by pushing the suitable puller. This type of fittings is used in order to speed up the assembly phases mainly in reduced space and time-saving during

PUL Union 90 Deg Elbow Pneumatic Push Fittings 1/8' 1/4' 3/8' 1/2' BRANDO’s push to connect fittings (or push-in fittings) are a quick and convenient method of connecting components in a pneumatic system. Designed for use with polyurethane, polyethylene, and nylon tubing, our composite push-in fittings are available in a variety of sizes to accommodate tubing ranging from 1/8 inch OD to 1/2 inch OD. Numerous configurations are available to meet your connection requirements.

PUL Union 90 Degree Elbow Pneumatic Air Fitting 1/8' 1/4' 3/8' 1/2' Pneumatic push-in fittings, also called push to connect fittings, provide a leak-free means of easily connecting hoses in your compressed air system. Fittings can have between 1-6 inlet/outlet ports or may have additional functionality such as an integrated pressure gauge or silencer. The greatest advantage of push-in fittings is the quick release system which allows for simple and easy installation by hand,

1/8' PUL Union Elbow Pneumatic Quick Fitting Push To Connect The shown Union elbow fittings connect two hoses and has a 90-degree bend to it. Each port has a push-in type connection. BRANDO’s push to connect fittings (or push-in fittings) are a quick and convenient method of connecting components in a pneumatic system. Designed for use with polyurethane, polyethylene, and nylon tubing, our composite push-in fittings are available in a variety of sizes to accommodate tubing