Pneumatic Hose Fittings

PUT Union Tee Push-In Pneumatic Air Hose Fittings 1/8' 1/4' 3/8' 1/2' Union Tee fittings form a “T” shaped junction to connect three equal diameter hoses using a push-in type connection at all ports. Unequal Union Tee fittings are also available to connect a smaller diameter hose to two larger diameter hoses. Push-to-connect fittings have ends that are designed to accept tubing by pushing it into the end. These fittings typically disconnect via some type of collar retraction.

PLL Extended Male Elbow Pneumatic Hose Fittings 1/8' 1/4' 3/8' 1/2' Elbow fittings connect hoses at 90 or 45-degrees to change the direction of air flow. They have a male or female threaded secondary port. Normal elbows have arms that are the same length, whereas long elbows will have one longer arm. Pneumatic fittings are predominantly made from three different types of material; plastic, stainless steel and polymer. Pneumatic fittings are used to connect lengths of tubing,

PT Male Branch Tee Pneumatic Quick Connect Coupling 1/8' 1/4' 3/8' 1/2' Pneumatic fittings are used to connect lengths of tubing, pipes and hose in pressurised pneumatic systems. They typically have tighter seals and lower pressure requirements compared to hydraulic fittings and can be commonly found in robotics within production lines as well as products we use within our daily lives such as vacuums and tyre pressure gauges. Pneumatic fittings are predominantly made from

PUT Union Tee Plastic Pneumatic Push On Fittings 1/8' 1/4' 3/8' 1/2' Push-to-connect fittings have ends that are designed to accept tubing by pushing it into the end. These fittings typically disconnect via some type of collar retraction. Push to connect fittings are convenient for sections of the system requiring frequent disconnection and reconnection. BRANDO offers Push to Connect fittings in a variety of configurations; Male Connectors, Female Connectors, 90° Elbows,

NSE Pneumatic Speed Controller Fittings 1/8' 1/4' 3/8' 1/2' Port mounted flow controls are ideal for adjusting the speed of extension and retraction for virtually any cylinder. Most double acting applications are best served with meter-out style flow controls which control the flow of exhaust as it leaves the cylinder. By reducing the exhaust air flow rate, the flow control reduces the speed of the cylinder rod travel. The finely threaded stem allows the gradual adjustment of

PH Male Banjo Pneumatic Air Hose Connectors 1/8' 1/4' 3/8' 1/2' Push-to-connect pneumatic tube fillings easily connect fittings and valves together Their leak-free design makes an easy connection with no additional tools necessary, making installation easy and affordable. These features ensure you have a secure connections for all of your pneumatic applications. BRANDO's Pneumatic Hose Fittings Features: 1. Optional shapes of release sleeve: As a manufacturer, BRANDO can

PTF Female Branch Tee Pneumatic Air Fittings 1/8' 1/4' 3/8' 1/2' BRANDO provides a complete line of composite push to connect fittings, including both inch and metric sizes. We have a large stock of products in our warehouse, ready to be shipped out same-day! BRANDO is your source for pneumatic connectors, branch tees, bulkhead fittings, control valves, unions, elbows, angles and manifolds. BRANDO's Pneumatic Hose Fittings Features: 1. Optional shapes of release sleeve: As a

PUT Union Tee Pneumatic Fittings Quick Connect 1/8' 1/4' 3/8' 1/2' Union Tee fitting: Union Tee fittings form a “T” shaped junction to connect three equal diameter hoses using a push-in type connection at all ports. Unequal Union Tee fittings are also available to connect a smaller diameter hose to two larger diameter hoses. Pneumatic push-in fittings, also called push to connect fittings, provide a leak-free means of easily connecting hoses in your compressed air system.

PL Male Elbow Push-In Pneumatic Air Hose Fittings 1/8' 1/4' 3/8' 1/2' Push-in fittings are designed for connection of pneumatic hose (with calibrated external diameter). The connection in achieved by pushing the hose into the fitting. To disconnect, the releasing collet must be pressed down. The most suitable hose material for push-in fittings is polyamide. Quick and easy to use, the push-in fittings can be re-used thousands of times without affecting the pneumatic and

PUL Union Elbow Push Fit Pneumatic Hose Fittings 1/8' 1/4' 3/8' 1/2' BRANDO’s push to connect fittings (or push-in fittings) are a quick and convenient method of connecting components in a pneumatic system. Designed for use with polyurethane, polyethylene, and nylon tubing, our composite push-in fittings are available in a variety of sizes to accommodate tubing ranging from 1/8 inch OD to 1/2 inch OD. Numerous configurations are available to meet your connection requirements.

PLF Female Elbow Push In Pneumatic Hose Fittings 1/8' 1/4' 3/8' 1/2' BRANDO's Pneumatic Hose Fittings provide easy connection and disconnection tube without causing damage to the tube. BRANDO's Pneumatic Fittings are available in a variety of types, moulds, sizes and thread types to satisfy various metric and inch tube demands. BRANDO's Pneumatic Fittings could accommodate both metric size tubing and inch size tubing that are made from polyurethane, polyethylene and nylon.

PST Male Run Tee Plastic Pneumatic Hose Fittings 1/8' 1/4' 3/8' 1/2' BRANDO's Pneumatic Hose Fittings provide easy connection and disconnection tube without causing damage to the tube. BRANDO's Pneumatic Fittings are available in a variety of types, moulds, sizes and thread types to satisfy various metric and inch tube demands. BRANDO's Pneumatic Fittings could accommodate both metric size tubing and inch size tubing that are made from polyurethane, polyethylene and nylon.

PHF Female Banjo Push-In Pneumatic Hose Fittings 1/8' 1/4' 3/8' 1/2' Push-to-connect fittings have ends that are designed to accept tubing by pushing it into the end. These fittings typically disconnect via some type of collar retraction. Push to connect fittings are convenient for sections of the system requiring frequent disconnection and reconnection. BRANDO offers Push to Connect fittings in a variety of configurations; Male Connectors, Female Connectors, 90° Elbows,

PL Male 90 Degree Elbow Pneumatic Hose Fittings 1/8' 1/4' 3/8' 1/2' Elbow Push To Connect Fittings: Push to connect pneumatic elbow fittings are easy to use with quick push in capabilities. The elbow design allows for a 90° or 45° change of direction, with a variety of styles available for different pneumatic push-in fitting applications. Elbow Push to Connect Fitting Styles: 90° Male Elbow 90° Male Elbow Extended 45° Male Elbow 90° Female Elbow 90° Union Elbow 90° Bulkhead

PC Male Straight Push-In Pneumatic Hose Fittings 1/8' 1/4' 3/8' 1/2' Push-in fittings are designed for connection of pneumatic hose (with calibrated external diameter). The connection in achieved by pushing the hose into the fitting. To disconnect, the releasing collet must be pressed down. The most suitable hose material for push-in fittings is polyamide. Quick and easy to use, the push-in fittings can be re-used thousands of times without affecting the pneumatic and

NSE Pneumatic Flow Control Air Fittings 1/8' 1/4' 3/8' 1/2' Port mounted flow controls are ideal for adjusting the speed of extension and retraction for virtually any cylinder. Most double acting applications are best served with meter-out style flow controls which control the flow of exhaust as it leaves the cylinder. By reducing the exhaust air flow rate, the flow control reduces the speed of the cylinder rod travel. The finely threaded stem allows the gradual adjustment of

PGT Union Tee Plastic Pneumatic Reducer Fittings 1/8' 1/4' 3/8' 1/2' BRANDO provides a complete line of composite push to connect fittings, including both inch and metric sizes. We have a large stock of products in our warehouse, ready to be shipped out same-day! BRANDO is your source for pneumatic connectors, branch tees, bulkhead fittings, control valves, unions, elbows, angles and manifolds. BRANDO's Pneumatic Hose Fittings Features: 1. Optional shapes of release sleeve:

PKB Male Triple Branch Plastic Pneumatic Hose Fittings 1/8' 1/4' 3/8' 1/2' Push-to-connect pneumatic tube fillings easily connect fittings and valves together Their leak-free design makes an easy connection with no additional tools necessary, making installation easy and affordable. These features ensure you have a secure connections for all of your pneumatic applications. BRANDO's Pneumatic Hose Fittings Features: 1. Optional shapes of release sleeve: As a manufacturer,

PUT 3 Way Union Tee Plastic Pneumatic Hose Fittings 1/8' 1/4' 3/8' 1/2' Union Tee fitting: Union Tee fittings form a “T” shaped junction to connect three equal diameter hoses using a push-in type connection at all ports. Unequal Union Tee fittings are also available to connect a smaller diameter hose to two larger diameter hoses. Pneumatic push-in fittings, also called push to connect fittings, provide a leak-free means of easily connecting hoses in your compressed air system

PYJ Plug-In Y Type Plastic Pneumatic Hose Fittings 1/8' 1/4' 3/8' 1/2' BRANDO’s composite push to connect fittings (or push-in fittings) are a quick and convenient method of connecting components in a pneumatic system. Designed for use with polyurethane, polyethylene, and nylon tubing, our composite push-in fittings are available in a variety of sizes to accommodate tubing ranging from 1/8 OD to 1/2 OD. Numerous configurations are available to meet your connection requirement