Brass Solenoid Valve

1 Inch Normally Open Brass Solenoid Valve NO PU225A-08 The NOPU225 (or PU225AN) is a 2/2 way normally open valve will stay open until electrical power is applied, at which point the armature covers the pilot hole prevent media above the diaphragm venting downstream and the inlet pressure presses the diaphragm back into the closed position and the valve is fully closed. Ordering Code of PU225A series Solenoid Valve: Main Dimension of PU225A series Solenoid Valve: PU225A Series

3/4 Inch Normally Open Brass Solenoid Valve NO PU225A-06 The NOPU225 (or PU225AN) is a 2/2 way normally open valve will stay open until electrical power is applied, at which point the armature covers the pilot hole prevent media above the diaphragm venting downstream and the inlet pressure presses the diaphragm back into the closed position and the valve is fully closed. Ordering Code of PU225A series Solenoid Valve: Main Dimension of PU225A series Solenoid Valve: PU225A

1/2 Inch Normally Open Brass Solenoid Valve NO PU225A-04 The NOPU225 (or PU225AN) is a 2/2 way normally open valve will stay open until electrical power is applied, at which point the armature covers the pilot hole prevent media above the diaphragm venting downstream and the inlet pressure presses the diaphragm back into the closed position and the valve is fully closed. Ordering Code of PU225A series Solenoid Valve: Main Dimension of PU225A series Solenoid Valve: PU225A

3/8'' Normally Open Brass Solenoid Valve PU225AN-03 220V 110V 24V The NOPU225 (or PU225AN) is a 2/2 way normally open valve will stay open until electrical power is applied, at which point the armature covers the pilot hole prevent media above the diaphragm venting downstream and the inlet pressure presses the diaphragm back into the closed position and the valve is fully closed. Ordering Code of PU225A series Solenoid Valve: Main Dimension of PU225A series Solenoid Valve:

SHAKO Type 2'' PU225A-20 2/2 Normally Closed Solenoid Valve PU225A Series Shako type PU225A series solenoid valve features: 1. Port thread 3/8, 1/2, 3/4, 1, 11/4, 11/2, 2" BSP/NPT or Flange (F) JIS10K, (F3) ANSI150Lb, (F4) PN16.2. Sealing NBR, EPDM or Viton.3. 0.5 to 10 bar differential, 15 bar maximum working.4. PU225A 2/2 normally closed, PU225AN 2/2 normally open.5. Pilot acting for low starting pressure6. Large flow rate and high working pressure.7. Quick response.8.

PU225A-14 SHAKO Type 1.5'' Brass Solenoid Valve AC220V AC110V DC24V This is PU225A-08 solenoid valve, 1'' port, 25mm orifice, 0.5 to 10 bar, diaphragm pilot operated, 2 way normally closed, brass body, NBR standard diaphragm, can be customized as EPDM or FKM diaphragm to suit different working mediums, various voltages for your choice, such as 12VDC, 24VDC, 24VAC, 110VAC and 220VAC, etc. It is used for a wide arrange of industrial applications to control fluids. Product

PU225A-12 1-1/4'' SHAKO Type 2/2 Way Solenoid Valve PU225A Series Shako type PU225A series solenoid valve features: 1. Port thread 3/8, 1/2, 3/4, 1, 11/4, 11/2, 2" BSP/NPT or Flange (F) JIS10K, (F3) ANSI150Lb, (F4) PN16.2. Sealing NBR, EPDM or Viton.3. 0.5 to 10 bar differential, 15 bar maximum working.4. PU225A 2/2 normally closed, PU225AN 2/2 normally open.5. Pilot acting for low starting pressure6. Large flow rate and high working pressure.7. Quick response.8. Stainless

PU225A-08 SHAKO Type 1'' Water Air Brass Solenoid Valve 24VDC 110VAC 220VAC This is PU225A-08 solenoid valve, 1'' port, 25mm orifice, 0.5 to 10 bar, diaphragm pilot operated, 2 way normally closed, brass body, NBR standard diaphragm, can be customized as EPDM or FKM diaphragm to suit different working mediums, various voltages for your choice, such as 12VDC, 24VDC, 24VAC, 110VAC and 220VAC, etc. It is used for a wide arrange of industrial applications to control fluids.

SHAKO Type Brass valve PU225A-06 2/2 Normally Closed Solenoid Valve PU225A Series This is PU225A-06 solenoid valve, 3/4'' port, 25mm orifice, 0.5 to 10 bar, diaphragm pilot operated, 2 way normally closed, brass body, NBR standard diaphragm, can be customized as EPDM or FKM diaphragm to suit different working mediums, various voltages for your choice, such as 12VDC, 24VDC, 24VAC, 110VAC and 220VAC, etc. It is used for a wide arrange of industrial applications to control

Shako Type PU225A-04 1/2'' 2 Way Normally Closed Brass Solenoid Valve 24V 110V 220V The PU225A is a 2/2-way (2 port / 2 positions) normally closed solenoid valve designed to stay closed until electrical power is applied. When power is applied the coil is magnetised which in turn lifts the armature revealing a small pilot hole which allows the pressure above the diaphragm to vent downstream so that the inlet pressure is able to fully lift the diaphragm allowing full flow

Shako Type PU225A-03 2/2 Normally Closed Solenoid Valve PU225A AC220V The PU225A is a 2/2-way (2 port / 2 positions) normally closed solenoid valve designed to stay closed until electrical power is applied. When power is applied the coil is magnetised which in turn lifts the armature revealing a small pilot hole which allows the pressure above the diaphragm to vent downstream so that the inlet pressure is able to fully lift the diaphragm allowing full flow through the valve.

SHAKO Type PU220AR-03 2/2 Way Solenoid Valve PU220AR Series 3/8'' Miniature Brass Solenoid Valve 2/2 Way: PU220AR-01-02-03 1. 1/8'', 1/4'' or 3/8'' BSP or NPT thread2. NBR seals,optional Viton or EPDM sealing.3. 2/2 way normally closed quick response.4. Pressure AC 0 to 20 bar / DC 0 to 13 bar depending on orifice, pressure tested to 30 bar.5. Direct acting 1/8'', 1/4'' and assisted lift 3/8''.6. Compact miniature 2 way solenoid valve.7. Most voltages available.8. Temperature

SHAKO Type Solenoid Valve PU220A-08 2 way Brass Solenoid Valve 1 Inch PU220A series Solenoid Vave Features: 1. Port 3/8, 1/2, 3/4 or 1" BSP or NPT thread2. PU220A 2/2 way normally closed, PU220AN normally open.3. Zero rated / direct acting 0 to 8.5 bar, special option high power 18.5 Watt coil for 0~12 bar4. Sealing NBR, EPDM, Viton or HNBR.5. Flange type is available for JIS 10K, ANSI 150LB and PN16.6. Quick response.7. Stainless steel extruded stem provides exceptional

SHAKO Type 3/4'' PU220A-06 2 way Brass Solenoid Valve 24V 110V 220V PU220A series Solenoid Vave Features: 1. Port 3/8, 1/2, 3/4 or 1" BSP or NPT thread2. PU220A 2/2 way normally closed, PU220AN normally open.3. Zero rated / direct acting 0 to 8.5 bar, special option high power 18.5 Watt coil for 0~12 bar4. Sealing NBR, EPDM, Viton or HNBR.5. Flange type is available for JIS 10K, ANSI 150LB and PN16.6. Quick response.7. Stainless steel extruded stem provides exceptional

PU220A-04 1/2'' Shako Type 2/2 way Brass Solenoid Valve 24V 110V 220V PU220A series Solenoid Vave Features: 1. Port 3/8, 1/2, 3/4 or 1" BSP or NPT thread2. PU220A 2/2 way normally closed, PU220AN normally open.3. Zero rated / direct acting 0 to 8.5 bar, special option high power 18.5 Watt coil for 0~12 bar4. Sealing NBR, EPDM, Viton or HNBR.5. Flange type is available for JIS 10K, ANSI 150LB and PN16.6. Quick response.7. Stainless steel extruded stem provides exceptional

PU220A-03 3/8'' Shako Type 2 Way NC Brass Solenoid Valve 24V 110V 220V PU220A series Solenoid Vave Features: 1. Port 3/8, 1/2, 3/4 or 1" BSP or NPT thread2. PU220A 2/2 way normally closed, PU220AN normally open.3. Zero rated / direct acting 0 to 8.5 bar, special option high power 18.5 Watt coil for 0~12 bar4. Sealing NBR, EPDM, Viton or HNBR.5. Flange type is available for JIS 10K, ANSI 150LB and PN16.6. Quick response.7. Stainless steel extruded stem provides exceptional

0955805 2'' Normally Open 2 Way Brass Solenoid Valve 24V 110V 220V Product Features: 1. Working Medium: Water, Air, Gas, Light Oil, etc 2. Working Pressure Range: 0.07 to 1.6 MPa 3. Medium Temperature Range: NBR (-5 to +80ºC), EPDM (-5 to +120ºC), FKM (-10 to +150ºC) 4. Port Size: 1/4'', 3/8'', 1/2'', 3/4'', 1'', 1 1/4'', 1 1/2'', 2'' 5. Orifice Size: 8mm, 10mm, 12mm, 20mm, 25mm, 32mm, 40mm, 50mm 6. Body Material: Brass 7. Diaphragm Material: NBR, EPDM, FKM 8. Operation:

0955705 1.5'' 2 Way Brass Solenoid Valve Normally Open 24V 110V 220V Product Features: 1. Working Medium: Water, Air, Gas, Light Oil, etc 2. Working Pressure Range: 0.07 to 1.6 MPa 3. Medium Temperature Range: NBR (-5 to +80ºC), EPDM (-5 to +120ºC), FKM (-10 to +150ºC) 4. Port Size: 1/4'', 3/8'', 1/2'', 3/4'', 1'', 1 1/4'', 1 1/2'', 2'' 5. Orifice Size: 8mm, 10mm, 12mm, 20mm, 25mm, 32mm, 40mm, 50mm 6. Body Material: Brass 7. Diaphragm Material: NBR, EPDM, FKM 8. Operation:

0955605 1-1/4'' 2 Way Normally Open Brass Solenoid Valve 1.6Mpa Product Features: 1. Working Medium: Water, Air, Gas, Light Oil, etc 2. Working Pressure Range: 0.07 to 1.6 MPa 3. Medium Temperature Range: NBR (-5 to +80ºC), EPDM (-5 to +120ºC), FKM (-10 to +150ºC) 4. Port Size: 1/4'', 3/8'', 1/2'', 3/4'', 1'', 1 1/4'', 1 1/2'', 2'' 5. Orifice Size: 8mm, 10mm, 12mm, 20mm, 25mm, 32mm, 40mm, 50mm 6. Body Material: Brass 7. Diaphragm Material: NBR, EPDM, FKM 8. Operation:

0955505 1'' Normally Open Brass Solenoid Valve 1.6Mpa Electric Water Valve Product Features: 1. Working Medium: Water, Air, Gas, Light Oil, etc 2. Working Pressure Range: 0.07 to 1.6 MPa 3. Medium Temperature Range: NBR (-5 to +80ºC), EPDM (-5 to +120ºC), FKM (-10 to +150ºC) 4. Port Size: 1/4'', 3/8'', 1/2'', 3/4'', 1'', 1 1/4'', 1 1/2'', 2'' 5. Orifice Size: 8mm, 10mm, 12mm, 20mm, 25mm, 32mm, 40mm, 50mm 6. Body Material: Brass 7. Diaphragm Material: NBR, EPDM, FKM 8.