Non Destructive Testing Equipment

HEF-CC100 Portable Eddy Current Detection System with Touch Screen Key Features Multi-channel detector with digital, intelligent, highly integrated features (1-8 channels optional) Advanced computer technology with DSP digital processing and FPGA technology Powerful data output capabilities and excellent scalability Comprehensive software features including parameter saving, data storage, and report analysis Supports flexible customization of various high-performance

HEF-17 Pulse Eddy Current Metal Pipe Wall Thickness Tester with LCD Screen Key Specifications Attribute Value Max detection of wall thickness 2～100mm Diameter of the pipe ≥21mm Thickness of metal protective layer ≤1mm Repeated detection accuracy 2% Measuring speed 15~0.5 time/s (reducing with increasing wall thickness) Length of probe cable 5m, 30m (optional) Corrosion defect detection sensitivity 5% (volume ratio) Product Features Integrated LCD screen and shortcut keys on

HEF-201STC Multi-frequency Eddy Current Tester for Defect Inspection & Conductivity Key Specifications Frequency Range 64 Hz-5 MHz Phase 0-359° in 0.1° steps Gain 0-90 dB in 0.5 dB steps Display 6.4" TFT 640 x 480 Operating Temperature -20°C to 55°C Battery Lithium battery, 8 hours working time per charge Product Overview The HEF-201STC Real-time Multi-frequency Eddy Current Tester revolutionizes manual inspection with enhanced speed, accuracy, and efficiency. This advanced

HEF-24ET Digital Multi-channel Eddy Current Flaw Detector for Inner/Outer Wall Cracks Product Specifications Attribute Value Frequency 50 Hz～10 MHz Gain ratio (X/Y) 0.1～10.0 Delay marking 0.001～120.000s Marking length 0.1m～49.9m Step 0.01mm～1000.0mm Automatic balance -1～20 second Product Overview HEF-24ET Intelligent Digital Multi-channel Real Time Eddy Current Inner Wall and Outside Wall Cracks Flaw Detection Applications Particularly applicable to nuclear energy, electric

HG3002 2 vibration channels +1 speed channel Color LCD Screen Vibration Vault Data Measurement Recording Analysis Meter Introduction The vibration analyzer is specially developed for the field portable application. It not only meets the requirements of portable collection, but also realizes the powerful field data collection and equipment fault analysis function. It has a very high cost performance. Vibration analyzer is an indispensable intelligent instrument for condition

TG-M70C Magnetic Crawler Corrosion and Electromagnetic Ultrasonic Thickness Measurement Robot for Plate Wall Corrosion Detection 1.Brief introduction This system does need scaffolding, no need remove scale, rust or paint, no need couplant. It can realize rapid detection of high altitude wall thickness corrosion through remote control system. Using the rare-earth high-strength permanent magnet wheel, even if there is an unexpected power failure, it will not fall from the

TG-M70C Magnetic Crawler Corrosion and Electromagnetic Ultrasonic Thickness Measurement Robot for Plate Wall Corrosion Detection 1.Brief introduction This system does need scaffolding, no need remove scale, rust or paint, no need couplant. It can realize rapid detection of high altitude wall thickness corrosion through remote control system. Using the rare-earth high-strength permanent magnet wheel, even if there is an unexpected power failure, it will not fall from the

Roundness Measuring Instrument 1. Product name:Roundness Measuring Instrument 2. Product model:SRT-7190 3.Technical parameters: Part name Model name SRT-7190 Rotary working table Bearing type Air float Spindle accuracy ±0.025μm System accuracy 0.06μm Measure the max outside diameter Φ140mm(expandability) Minimum inside diameter φ3mm Max bearing 60kg Rotating speed 5RPM/min Vertical axis (z-axis) Vertical movement 300mm(augmentable) Vertical movement Electro motion Maximum

Surface Roughness Contour Graph Profilometer Testing Machine 1.Product name:Surface Roughness Profiler Integrated Machine 2.Product model:SRT-7150 3.Technical parameters: Project Model SRT-7150 X axis Sliding linear guide rail Movement accuracy ≤0.5μm /80mm X -axis positioning Grating ruler Resolution 0.1μm Place of production China Data sensor Resolution 0.02μm Place of production Imported abroad System resolution 65536:1 Linear accuracy ≤±(1.5+|0.2H|)μm circular arc ≤±(2＋R

FJ-CoMo50 Built-in 60,000 data storage capacity α and β Radiation Surface Contamination Monitor FJ-CoMo50 Surface Contamination Meter is designed to measure α, β, and γ surface contamination at the same time. This instrument is easy to carry and easy to operate. It is widely used in environmental protection, public security, customs, health, nuclear industry, nuclear power plants and other systems. Technical Parameters: Detector type ZnS coating, thin film plastic scintillato

FJ-CoMo50 Nuclear Industry Sound Light and Vibration Alarm ALPHA BETA GAMMA Surface Contamination Meter FJ-CoMo50 Surface Contamination Meter is designed to measure α, β, and γ surface contamination at the same time. This instrument is easy to carry and easy to operate. It is widely used in environmental protection, public security, customs, health, nuclear industry, nuclear power plants and other systems. Technical Parameters: Detector type ZnS coating, thin film plastic

H1719HDA-GZ It is an amorphous silicon based sensor suitable for dental imaging and industrial inspection Sensor Receptor Type IGZO Scintillator CsI:TI Active Area 165.8 x 183.8 mm Resolution 1386 x 1536 Pixel Pitch 120 μm Power Supply & Battery Adapter In AC 100-240V,50-60Hz Adapter Out DC 24V,2.7A Power Dissipation

TG-100G Wire testing Connected to the Computer Electroplating Coulometric Thickness Tester TG-100G is more focused on the automobile, motorcycle, and sanitary ware industries, because these industries will use the potential difference function. And neodymium iron boron industry, to solve the test problems of the underlying nickel. Automobiles such as: signs, car door locks, car handles, car interior parts, motorcycles such as mufflers, motorcycle, brackets, sanitary wares

TG-6105 Basic FM Probe Zinc Coating in Galvanized iron strips Coating Thickness Gauge TG-6105 is a magnetic and eddy current portable coating thickness gauge, It can quickly, without damage, the precision to measure magnetic metal substrates (such as steel, iron, alloy and hard magnetic steel, etc.) on the magnetic coating thickness (such as zinc, aluminum, chromium, copper, rubber, paint, etc.) and nonmagnetic metal substrates (such as copper, aluminum, zinc, tin, etc.) on

Shore Durometer HS-OO HS-OO durometer is an essential characteristic of Rubber foam, sponge, plastic foam, silicone, gelatinous materials, textiles, low-density coils. products. It is feature portability, ease of operation, with facility, high resolution and it is available in GB/T 531 -1999 and ISO 7619, ASTM D2240. Parameter Type Specific Value Application Scenario Description Test Range Total: 0-100 Available: 10-90 Recommended to use within 10-90; exceeding this range may

Shore 000 Durometer Is Used to test Hardness of Ultra Soft Gels and Sponge Rubber Overview Shore dutometer conforms to standards ASTM D2240. Shore 000 durometer is used to test hardness of Ultra soft gels and sponge rubber.. Shore A: Soft rubber, plastics, and elastomers, printer's rolls Shore D: Hard rubber and plastics such as thermo plastics, flooring and bowling balls. Shore B: Harder elastomers and plastics. Paper and fibrous materials, Use above 93 Duro A. Shore C:

Aviation Inspection Eddy Current Corrosion Inspection Point probe Product Features: Various probes can be customized according to the shape of the workpiece and can be matched and linked with various instruments. The shell is made of stainless steel and industrial plastic We offer domestic production of imported probes, with faster delivery times and more favorable procurement costs. Application scenarios: It is used for aviation inspection of surface cracks, corrosion and

Eddy Current Surface Cracks Inspection Point probe Product Features: Various probes can be customized according to the shape of the workpiece and can be matched and linked with various instruments. The shell is made of stainless steel and industrial plastic We offer domestic production of imported probes, with faster delivery times and more favorable procurement costs. Application scenarios: It is used for aviation inspection of surface cracks, corrosion and fatigue damage on

Eddy Current Stainless steel and Sngineering plastics External through-type probe The eddy current sensor is based on the principle of electromagnetic induction. It generates an alternating magnetic field through a coil. When approaching a conductive object, the magnetic field will induce eddy currents on the object's surface. The reverse magnetic field produced by the eddy currents will change the impedance of the coil. By measuring the impedance change, the characteristics

Non-ferromagnetic materials U-shaped through-hole Eddy Current Probe The eddy current sensor is based on the principle of electromagnetic induction. It generates an alternating magnetic field through a coil. When approaching a conductive object, the magnetic field will induce eddy currents on the object's surface. The reverse magnetic field produced by the eddy currents will change the impedance of the coil. By measuring the impedance change, the characteristics of the object