Non Destructive Testing Equipment

Eddy Current Detachable split structure Inner Lining and Ordinary Inner Lining Probe Application scenarios: It is applicable to various non-ferromagnetic materials, such as austenitic stainless steel, copper, titanium, etc. in the eddy current internal penetration detection of pipes. It can effectively detect corrosion points and cracks on the inner and outer walls of the pipes. Absolute coils can also be added according to the detection requirements to achieve the measuremen

Leeb Hardness Blocks for Leeb Hardness Tester Purpose: The hardness block for the Leeb hardness tester is mainly used to calibrate and verify the accuracy of the Leeb hardness tester. It provides a known hardness reference standard to ensure that the test results of the hardness tester are reliable and accurate. Leeb 750-850 HLD 590-670 HLD 490-570 HLD 550-630HLG 460-540 HLG Principle: Based on the Leeb hardness principle, when the impact body of the Leeb hardness tester

NDT Hardness Blocks for Bench type Brinell Rockwell Vickers Hardness Tester Brinell Hardness Block . Purpose: It is used for the annual indirect verification and calibration of Brinell hardness testers, as well as for the cyclic (daily) checks of hardness testers. Description: Usually made of aluminum for hardness values below 200 Brinell. The surface can be either shiny - polished or matte. The hardness block is rectangular, with dimensions of 150mm x 125mm x 16mm, and is

H3543HWN-AG amorphous silicon Lightweight Wireless Security Detector H4343HDA-AG is a light weight detector based on amorphous silicon(a-Si), which is suitable for various fields such as dynamic DR and Non-destructive testing. Electricals and interface A/D Conversion 16 bits Data Interface Gigabit Ethernet Frame rate 1x1 4fps/2x2 15fps/3x3 25fps Exposure Control Free Run/SYNC Acquire Mechanical Dimension 460 × 460 × 14.8 mm Weight 3.8kg Material Aluminum and magnesium alloys

SRT-6680 ±80μm/±160 µm Color graphic TFT Touch screen Surface Roughness Tester Main Features Mechatronic and ergonomics design, small size, light weight, easy to operation The stylus drive unit can be stored within the main unit for standard measurement, or separated from the display unit by using the supplied cable which allows more flexible measurement in any orientation. The driver can be separated and reattached in one simple step. DSP chip control and data processing,

Near-field Eddy Current stainless steel shell Probe The eddy current sensor is based on the principle of electromagnetic induction. It generates an alternating magnetic field through a coil. When approaching a conductive object, the magnetic field will induce eddy currents on the object's surface. The reverse magnetic field produced by the eddy currents will change the impedance of the coil. By measuring the impedance change, the characteristics of the object being measured

A/B Scanning Handheld High-Precision Digital Ultrasonic Thickness Gauge TG-5700 is a new type of handheld high-precision digital ultrasonic thickness gauge with A/B scanning. It adopts the principle of ultrasonic thickness measurement based on pulse reflection. It is suitable for the measurement of material thickness that can make ultrasonic wave propagate in it at a constant speed and get the reflection from its back. The measurement resolution is 0.001mm and the measurement

TG-5710A/B Scan 0.100-1800mm Big range Ultrasonic Thickness Gauge Product Overview TG-5710 is a brand new handheld high-precision digital ultrasonic thickness gauge with A/B scan. It adopts the principle of ultrasonic thickness measurement based on pulse reflection. It is suitable for the measurement of material thickness that can make ultrasonic wave propagate in it at a constant speed and get the reflection from its back. The measurement resolution is 0.001mm and the

Eddy Current Far-field Probe for Heat Exchangers Ferromagnetic Tubes The eddy current sensor is based on the principle of electromagnetic induction. It generates an alternating magnetic field through a coil. When approaching a conductive object, the magnetic field will induce eddy currents on the object's surface. The reverse magnetic field produced by the eddy currents will change the impedance of the coil. By measuring the impedance change, the characteristics of the object

TG-6200 Handheld non-metallic ultrasonic coating thickness gauge Can measure the coating thickness on various metal, non-metal (glass, plastic, composite, concrete, wood, etc.) substrates summarize Handheld non-metallic coating thickness gauge with numerical display and A/B scanning function. The principle of pulsed reflection ultrasonic thickness measurement is applicable to the measurement of ultra-thin film material or coating thickness that can make ultrasonic wave

H3024WCH-HG IP54 Wireless Pipeline Inspection DR Flat Panel Detector H3024WCH-HG is a lightweight wireless flat panel detector based on amorphous silicon sensors, suitable for pipeline inspection, security, power and other fields. sensor Sensor Type a-Si Scintillator CsI:TI Effective area 239 x 304 mm Resolution 2816 x 3584 Pixel size 85 μm Power supply and battery Adapter input AC 100-240V,50-60Hz Adapter output DC 24V,2.5A Power consumption

H3543HSA-AG IP51 Light Weight DR Panel H3543HSA-AG is a light weight detector based on amorphous silicon(a-Si), which is suitable for various fields such as DR and Non-destructive testing. Electricals and interfaceA/D Conversion 16 bits Data Interface Gigabit Ethernet Acquire Time wired: 1s Exposure Control Software/Outer/AED Mechanical Dimension 384 × 460 × 14.8 mm Weight 3.4kg Material Aluminum and magnesium alloys Front Panel Carbon fiber Enviromental Temperature 10-35°C

H3543HWN-AG amorphous silicon Lightweight Wireless Security Detector H3543HWN-AG is a lightweight wireless detector based on amorphous silicon(a-Si), which is suitable for various fields such as Security and Non-destructive testing. Electricals and interface A/D Conversion 16 bits Data Interface Gigabit Ethernet/802.11ac (only 5G) Acquire Time wired: 1s; wireless: 3s Exposure Control Software Max Exposure time 180s Memory 4 GB DDR4, 8 GB SD card Mechanical Dimension 384 × 456

H3543HWF-AG 139μm Amorphous Silicon A-Si Curved DR Panel Sensor Receptor Type a-Si Scintillator Gos Active Area 350 x 430 mm Resolution 2560 x 3072 Pixel Pitch 139 μm Electricals and interface A/D Conversion 16 bits Data Interface Gigabit Ethernet/802.11ac (only 5G) Acquire Time wired: 1s; wireless: 3s Exposure Control Software/Sync Memory 4 GB DDR4, 8 GB SD card Mechanical Dimension 583x437x21.8mm Weight 4.5kg (without battery) Material Aluminum and magnesium alloys Front

HXRF-1XLIBS LIBS PMI Carbon Element Alloy Material Identification Analyzer Performance Features 1) Elements can be analyzed and detected (commonly used):Beryllium Be, Magnesium Mg, Aluminum Al, Silicon Si, Titanium Ti, Vanadium V, Chromium Cr, Manganese Mn, Iron Fe, Cobalt Co,Nickel Ni, Copper Cu, Zinc Zn, Niobium Nb, Molybdenum Mo, Tin Sn, Tungsten W, lead Pb, Bi Bi 2) Can quickly detect and identify aluminum alloy, copper alloy, nickel alloy, stainless steel, low and medium

TG-5700 A/B Scan 0.100-1800mm Big range Ultrasonic Thickness Gauge TG-5710 is a brand new handheld high-precision digital ultrasonic thickness gauge with A/B scan. It adopts the principle of ultrasonic thickness measurement based on pulse reflection. It is suitable for the measurement of material thickness that can make ultrasonic wave propagate in it at a constant speed and get the reflection from its back. The measurement resolution is 0.001mm and the measurement range is

DG-3101S Industry ndt Inspection UV Helmet-type Black Lamp Main features A new palm-sized, hands-free light source that can be worn on the head with a UV helmet type black light that frees the user's hands during inspections. Helmet-type black lamp is an ideal test tool for fluorescent magnetic particle and penetration inspection, mine inspection, etc. The DG-3101S UV headlamp is equipped with the powerful UV-A (365 nm) LED lamp design. The on/off button of the DG-3101S UV

HXRF-580GF Handheld High Coordination Gold Alloy Analysis Spectrometer Product function, analysis accuracy and stability (1) Function (1) All elements between Mg (magnesium) and U (uranium) can be analyzed. (2) More than 2,000 kinds of alloy grades can be analyzed, and the machine comes with a database of alloy grades up to 300 kinds. At the same time, users can customize and add more than 300 kinds of gold medal database. (3), used for stainless steel, alloy steel, tool

FD202 Automated Calibration Digital High-speed Capture Ultrasonic Flaw Detector ★ Automated calibration,Automated gain ★ DAC,AVG,B scan,6dB DAC ★ High-speed capture and very low noise ★ Solid metal housing ★ high contrast viewing of the waveform from bright ★ Powerful pc software and reports can be export to excel Specifications Title Parameter Title Parameter Measuring Range(mm) 0 ～ 10000 Measurement Mode Single,Dual,Thru Vertical Linearity Error ≤3% Reject 0~80% Horizontal

HFD-SW30 Automotive Welding Spots Ultrasonic Testing Integrated System The ultrasonic testing system HFD-SW30 for car welding points is an integrated system independently developed by HUATEC Group. The core components of the system adopt original imported brands, laying the foundation for the stability and consistency of the subsequent system; The data collection and analysis docking software is developed by our own company, relying on the data background of senior engineers