Refrigeration Filter Drier, oil separator, gas separator, filter cylinder

Product Introduction ZRM series molecular sieve liquid line filter drier using high quality compressed spherical desiccant, and compressed through automatci integration with high-density filters in the cylinder body, to reach the function of drying and filtering, and effectively filter residual water and impurities of the system. 　 Model No. Connection Size Dimension (mm) Features ODF SAE A B D 1. Effectively removing acids, moisture and solid contaminants ZRM-032 　 1/4" 113

ZRC series solid core filter drier, be using for the refrigeration equipments. More details please contact with us.

ZRA take apart filter drier with exchangeable solid core uses the flange connection to seal. That is very convenient to adjust and maintain the equipment. More details please contact with us.

ZRB take apart filter drier with exchangeable solid core uses the flange connection to seal. That is very convenient to adjust and maintain the equipment. More details please contact with us.

ZRH series heat exchanger accumulator & liquid receiver be using for the refrigeration equipments. More details please contact with us.

ZRK series bi-directional filter drier is designed to prevent refrigerant contamination in heating and refrigeration cycle system. It prevents the contaminants that concentrated to one direction flowing back when the system having a reversible flow. This design saves two external check valves and two normal filter driers, making the lines easier and lower the cost. More details please contact with us.

The high pressure refrigerant turns to liquid and gas status after it goes through condenser, but in order to get the best cooling effect, it must be on liquid status when enter the evaporator. Therefore, a refrigerant receiver be required, to store the high pressure refrigerant and then extract the liquid refrigerant from the bottom to the evaporator. It makes the evaporator achieve the best. Features: 1. Imported high quality stop valve 2. Durable steel shells prolong

The high pressure refrigerant turns to liquid and gas status after it goes through condenser, but in order to get the best cooling effect, it must be on liquid status when enter the evaporator. Therefore, a refrigerant receiver be required, to store the high pressure refrigerant and then extract the liquid refrigerant from the bottom to the evaporator. It makes the evaporator achieve the best. Features: 1. Imported high quality stop valve 2. Durable steel shells prolong

The high pressure refrigerant turns to liquid and gas status after it goes through condenser, but in order to get the best cooling effect, it must be on liquid status when enter the evaporator. Therefore, a refrigerant receiver be required, to store the high pressure refrigerant and then extract the liquid refrigerant from the bottom to the evaporator. It makes the evaporator achieve the best. Features: 1. Imported high quality stop valve 2. Durable steel shells prolong

In the air-conditioning refrigeration system, the refrigerant line can be divided into two parts, high pressure and low pressure. The temperature of high pressure's refrigerant is higher, which need to cool by condenser. And the low pressure refrigerant which be through the evaporator, need the gas-liquid separator to separate the gaseous and liquid refrigerant. The liquid refrigerant needs the time and temperature to evaporate to the gaseous then be entered the compressor,

ZRCL series solid core liquid line filter drier using high quality sintered desiccant module of small spherical molecular filter driers, combined with high-density filter mesh to provide excellent filteration, thus effectively filter residual water and impurities of the system. More details please contact with us.

The cores and demountable filter drier shells is common and replaceable. The core including ZRF, ZRX suction line series and ZRD, ZRH liquid line series are packed in metal cans with well sealed, that can fully against the dirt, oil and dust.

During the compressor operating, the outlet of compressor always has lots of refrigerant oil. In order to prevent compressor not loss too much refrigerants and prevent the oil flow to system with refrigerants to interfere condenser's heat function and evaporator's cooling function, we need to install an oil separator between compressor and condenser to separate refrigerant oil and refrigerants. Then the oil will flow back to the compressor crankcase, the oil return device

During the compressor operating, the outlet of compressor always has lots of refrigerant oil. In order to prevent compressor not loss too much refrigerants and prevent the oil flow to system with refrigerants to interfere condenser's heat function and evaporator's cooling function, we need to install an oil separator between compressor and condenser to separate refrigerant oil and refrigerants. Then the oil will flow back to the compressor crankcase, the oil return device

ZRML series molecular sieve liquid line filter drier using high quality compressed spherical desiccant, and compressed through automatci integration with high-density filters in the cylinder body, to reach the function of drying and filtering, and effectively filter residual water and impurities of the system. More details please contact with us.

The cores and demountable filter drier shells is common and replaceable. The core including ZRF, ZRX suction line series and ZRD, ZRH liquid line series are packed in metal cans with well sealed, that can fully against the dirt, oil and dust.

The function is to store liquid refrigerant supplied to evaporator, meanwhile, it is capable to store all refrigerants in system when maintaining. Features 1. Designed for refrigerant storage in system's normal operation or maintaining 2. System adjustment is allowed to suit with different condition or loading 3. Compatible with HFC, HCFC, CFC and associated oils and additives 4. Assemble a high quality rotalock valve or safety valve 5. Max. working pressure: 3.5Mpa

In circulatory system, the refrigerant must be convert became gas before returning to compressor. So it has to separate gas and liquid before the refrigerant enters into the compressor. And let the gas refrigerant enters into the compressor will not cause strike. The liquid refrigerant evaporate slowly in the vessel, then enter the compresor after evaporation. In order to make the residual refrigerant oil come back to compressor, there is no hole in the bottom of tube in