RF PCB

2-Layer TP1600 PCB | 0.8mm Core | Pure Gold Plating Product Overview We are pleased to present this newly customized 2-layer rigid PCB built on Wangling's TP1600 high-performance microwave composite dielectric laminate. As a specialized member of the TP series, this material features a ceramic-filled polyphenylene oxide (PPO) resin matrix with no fiberglass reinforcement, offering a uniquely smooth surface and uniform electrical performance. The board measures 75mm x 68mm

What circuit boards do we do? (8) RT/duroid 5870 High Frequency PCB Introduction Rogers RT/duroid 5870 high frequency laminates are PTFE composites reinforced with glass microfibers, specifically engineered for the precise demands of stripline and microstrip circuit applications. These composites possess exceptional dielectric constant uniformity due to the presence of randomly oriented microfibers. RT/duroid 5870 laminates offer high frequency with low dielectric constant

What circuit boards do we do? (28) TLX-9 High Frequency PCB Introduction Taconic’s TLX-9 high-frequency material is a composite of PTFE fiberglass laminates, representing the pinnacle of innovation in copper-clad PTFE/woven glass technology. It features excellent mechanical and thermal properties, a low dissipation factor, and a low and stable dielectric constant with tight control, while also meeting the UL 94 V-0 flammability rating. Additionally, TLX-9 laminates can be

What circuit boards do we do? (22) DiClad 880 High Frequency PCB Introduction Rogers DiClad 880 high frequency laminates are PTFE-based composites with woven fiberglass reinforcement. By using fewer plies of woven fiberglass and a higher ratio of PTFE content, DiClad 880 achieves lower dielectric constant and lower dissipation factors at a similar thickness to other laminates. They are frequently used in filter, coupler and low noise amplifier applications, where Dk

What circuit boards do we do? (2) RT/duroid 5880 High Frequency PCB Introduction RT/duroid 5880 laminates are composite materials composed of PTFE and random glass fibers, known for their outstanding properties. They are specifically engineered for applications that demand high frequency and broadband capabilities. These laminates possess a low dielectric constant (Dk) and low dielectric loss, making them ideal for reliable and precise signal transmission. RT/duroid 5880

2-Layer RF-10 PCB | 10mil Core | ENEPIG Finish Product Overview We are pleased to present this newly customized 2-layer rigid PCB engineered specifically for high-frequency RF applications. Built on RF-10 ceramic-filled PTFE laminate, this board offers a stable dielectric constant (DK=10.2) and an ultra-low dissipation factor (0.0025 at 10GHz), enabling significant circuit size reduction while maintaining signal integrity. The board measures 143.6mm x 109.8mm (supplied as two

What circuit boards do we do? (60) TF High Frequency PCB Introduction Wangling’s TF laminates are a composite of microwave and temperature-resistant polytetrafluoroethylene (PTFE) resin material and ceramics. These laminates are free from fiberglass cloth and the dielectric constant is precisely adjusted by adjusting the ratio between ceramics and PTFE resin. With the application of special production processes, they demonstrate outstanding dielectric performance and offer a

What circuit boards do we do?(59) F4BTMS High Frequency PCB Introduction The F4BTMS series is an upgraded version of the F4BTM series. The material now incorporates a large amount of ceramics and utilizes ultra-thin and ultra-fine fiberglass cloth reinforcement. These enhancements have greatly improved the material's performance, resulting in a wider range of dielectric constants. The incorporation of ultra-thin, ultra-fine fiberglass cloth reinforcement, along with a precise

What circuit boards do we do? (58) TP High Frequency PCB Introduction Wangling’s TP material is a unique high-frequency thermoplastic material in the industry. The dielectric layer of TP-type laminates consists of ceramics and polyphenylene Oxide resin (PPO), without fiberglass reinforcement. The dielectric constant can be precisely adjusted by adjusting the ratio between ceramics and PPO resin. The production process is special, and it has excellent dielectric performance

What circuit boards do we do ?(57) F4BTM High Frequency PCB Introduction Wangling’s F4BTM series laminates are fiberglass cloth, nano-ceramic fillers, and PTFE resin, followed by strict pressing processes. They are based on the F4BM dielectric layer, with the addition of high dielectric and low loss nano-level ceramics, resulting in higher dielectric constant, improved heat resistance, lower thermal expansion coefficient, higher insulation resistance, and better thermal

What circuit boards do we do? (56) RO3203 High Frequency PCB Introduction RO3203 high frequency circuit materials are ceramic-filled laminates reinforced with woven fiberglass. These materials have been specifically engineered to provide exceptional electrical performance and mechanical stability while remaining cost-effective. As an extension of the RO3000 series, RO3203 materials stand out with their enhanced mechanical stability. With a dielectric constant of 3.02 and a

What circuit boards do we do? (55) RT/duroid 6202 High Frequency PCB Introduction Rogers RT/duroid 6202 high frequency circuit materials are laminates with low loss and low dielectric constant. They are designed with a limited woven glass reinforcement, providing essential electrical and mechanical properties. The RT/duroid 6202 laminates are ideal for designing complex microwave structures that require both mechanical reliability and electrical stability. The addition of

What circuit boards do we do? (53) F4BME High Frequency PCB Introduction Wangling’s F4BME high frequency materials are PTFE glass fiber cloth copper clad laminates that combine glass fiber cloth, PTFE resin, and PTFE film through a meticulous manufacturing process. These series laminates offer improved electrical performance compared to F4B due to their wider range of dielectric constants, low dielectric loss, increased insulation resistance, and enhanced stability.

What circuit boards do we do? (52) CuClad 217 High Frequency PCB Introduction Rogers CuClad 217 laminates are composite materials consisting of woven fiberglass and precisely controlled PTFE. They are designed with a cross-plied construction, providing both electrical and mechanical isotropy within the plane. The low fiberglass/PTFE ratio in CuClad 217 results in the lowest dielectric constant (Dk) and dissipation factor available in fiberglass reinforced PTFE based laminates

What circuit boards do we do? (51) TMS-DS3 High Frequency PCB Introduction TSM-DS3 is a dimensionally stable laminate with exceptional low-loss properties. Its thermal stability makes it an industry-leading choice, with a dissipation factor (DF) of 0.0011 at 10 GHz. This laminate offers the reliability and consistency of top-quality fiberglass reinforced epoxies. Features TSM-DS3 stands out as a ceramic-filled reinforced material with a minimal fiberglass content of

What circuit boards do we do? (50) RF-10 High Frequency PCB Introduction RF-10 laminates are a composite material consisting of ceramic filled PTFE and woven fiberglass. These laminates offer several advantages, including a high dielectric constant and low dissipation factor. The incorporation of thin woven fiberglass reinforcement provides a dual benefit of low dielectric loss and improved rigidity, making the material easier to handle and enhancing its dimensional stability

What circuit boards do we do? (49) TMM3 Microwave PCB Introduction Rogers TMM3 thermoset microwave material is a ceramic thermoset polymer composite specifically engineered for strip-line and micro-strip applications requiring high plated thru-hole reliability. TMM3 laminates offer a unique blend of advantages found in both ceramic and traditional PTFE microwave circuit laminates, eliminating the need for complex production techniques associated with these materials. These

What circuit boards do we do?(48)RO4830 High Frequency PCB IntroductionRogers' RO4830 high frequency laminates are thermoset materials that provide a dependable and cost-effective substitute for traditional PTFE based laminates. RO4830 thermoset laminates are particularly suitable for millimeter wave applications that require cost-efficiency, such as automotive radar sensors operating in the 76-81 GHz frequency range. These laminates can be manufactured using standard FR-4

What circuit boards do we do? (47) CLTE-XT High Frequency PCB Introduction Rogers CLTE-XT laminates are composites of micro-dispersed ceramic filler, PTFE and woven fiberglass reinforcement, designed to improve loss tangent while maintaining good dimensional stability. These laminates demonstrate an exceptionally low coefficient of thermal expansion (CTE) in the planar direction, making them particularly suitable for precision applications involving embedded resistors. Among

What circuit boards do we do? (46) CER-10 High Frequency PCB Introduction CER-10 is an organic-ceramic laminate from Taconic’s ORCER product family. With dielectric constant of 10 and low dissipation factor of 0.0035 at 10 GHz. It features a woven glass reinforcement, combining Taconic’s advanced ceramic fill technology with coated PTFE fiberglass expertise. Features CER-10 delivers exceptional interlaminar bond strength and solder resistance, making it ideal for high