Arlon PCB Board

Hybrid PCB Built On 10mil RO4003C and FR-4 Combined With Immersion Silver(PCB’s are custom-made products, the picture and parameters shown are just for reference) General descriptionThis is a type of mixed PCB built on 10mil RO4003C substrate and FR-4 combined for the application of SMS Gateway. It's 1.12 mm thick with 4 layers copper of 1oz weight each layer, white silkscreen on blue solder mask and immersion silver on pads. The base material is from Rogers Corp supplying

Rogers RO4730G3 60mil 1.524mm High Frequency PCB Cellular Base Station Antenna PCB Rogers RO4730G3 antenna grade laminates are reliable, low-cost alternative to the conventional PTFE-based laminates. It has the mechanical and electrical properties that antenna designers need. The materials have a dielectric constant of 3.0 and a loss tangent of 0.0022 measured at 2.5 GHz when using LoPro Reverse Treated EDC foil. These values allow antenna designers to realize substantial

RO4730G3 30mil 0.762mm High Frequency PCB for Wireless Telecommunications Antennas Rogers RO4730G3 antenna grade laminates are reliable, low-cost alternative to the conventional PTFE-based laminates. It has the mechanical and electrical properties that antenna designers need. The materials have a dielectric constant of 3.0 and a loss tangent of 0.0022 measured at 2.5 GHz when using LoPro Reverse Treated EDC foil. These values allow antenna designers to realize substantial

High Frequency PCB Built On 10mil RO4350B With 4 Designs in Panel (PCB’s are custom-made products, the picture and parameters shown are just for reference) General description This is a type of high frequency PCB built on 10mil RO4350B substrate with Tg 280°C for the application of portable antenna. It's 0.3 mm thick with 2 layers copper, black silkscreen directly on substrate and immersion gold on pads. The base material is from Rogers Corp supplying 4 types PCBs per panel.

Antenna PCB Built On 10mil RO4350B With Immersion Gold on Both Sides (Printed circuit boards are custom-made products, the picture and parameters shown are just for reference) General description This is a type of high frequency PCB built on 10mil (0.254mm) RO4350B substrate with Tg 280°C for the application of RF antenna. It's double sided board at 0.30 mm thick, white silkscreen over green solder mask on bottom side and immersion gold is on pad for soldering. The base

Antenna PCB Built On 10mil RO4350B With Immersion Gold on Both Sides (Printed circuit boards are custom-made products, the picture and parameters shown are just for reference) General description This is a type of high frequency PCB built on 10mil (0.254mm) RO4350B substrate with Tg 280°C for the application of RF antenna. It's double sided board at 0.30 mm thick, white silkscreen over green solder mask on bottom side and immersion gold is on pad for soldering. The base

Rogers RO3210 High Frequency PCB with 25mil and 50mil Coating Immersion Gold, Immersion Tin and Immersion Silver(PCB's are custom-made products, the picture and parameters shown are just for reference) Hello Everyone,Today we’re talking about RO3210 high frequency PCBs. RO3210 high frequency circuit laminates are ceramic-filled laminates reinforced with woven fiberglass. RO3210 material was designed as an extension of the RO3000 series high frequency circuit materials with

High Frequency PCB Built on Taconic RF-35TC DK3.5 With 60mil Thick and Immersion Gold for Power Amplifier (PCB's are custom-made products, the picture and parameters shown are just for reference) Hello Everyone, Today, we introduce a type of high frequency PCB built on RF-35TC. RF-35TC is a PTFE based, ceramic filled fiberglass high frequency material from Taconic company. PCB Specifications Layer count: Double sided Base material: RF-35TC DK 3.5 Dimension: 105 x 87mm

High Frequency PCB On 10 mil RO4350B With Immersion Gold for Radar Detector (Printed circuit boards are custom-made products, the picture and parameters shown are just for reference) General description This is a type of high frequency PCB built on 10mil (0.254mm) RO4350B substrate with Tg 280°C for the application of Radar Detector. It's double sided board at 0.30 mm thick, white silkscreen on green solder mask covering both sides and immersion gold is on pad for soldering.

Microwave PCB On 0.762mm RO4350B With ENIG ROHS Compliant (Printed circuit boards are custom-made products, the picture and parameters shown are just for reference) General description This is a type of microwave PCB built on 0.762mm RO4350B substrate with Tg 280°C for the application of WiFi Antenna. It's 0.80 mm thick with 2 layers copper, no silkscreen and no solder mask, HASL Pb free is plated on pads on both sides. The base material is used from Rogers Corp., entire

RF PCB On 30 mil(0.762mm) RO4350B With Immersion Gold(Printed circuit boards are custom-made products, the picture and parameters shown are just for reference) General descriptionThis is a type of RF PCB built on 30mil RO4350B substrate with Tg 280°C for the application of Wireless Communication. It's 0.80 mm thick with 2 layers copper, white silkscreen over green solder mask and immersion gold are on pads. The base material is used from Rogers Corp., entire board supplying 1

High Frequency PCB On 30 mil RO4350B With HASL ROHS Compliant (Printed circuit boards are custom-made products, the picture and parameters shown are just for reference) General description This is a type of high frequency PCB built on RO4350B substrate with Tg 280°C for the application of WiFi Amplifier. It's 0.80 mm thick with 2 layers copper, white silkscreen over green solder mask and HASL are on pads. The base material is used from Rogers Corp., entire board supplying 1

Microwave PCB Built On 1.6mm RO4350B With Gold Finish (Printed circuit boards are custom-made products, the picture and parameters shown are just for reference) General description This is a type of double sided high frequency PCB built on RO4350B substrate with Tg 280°C for the application of HDMI converter. It's 1.60 mm thick without solder mask; Black silkscreen is directly on the substrate and immersion gold is on pads for soldering. The base material is used from Rogers

RF PCB Built On 60mil RO4350B With Immersion Gold On Both Sides (Printed circuit boards are custom-made products, the picture and parameters shown are just for reference) General description This is a type of double sided high frequency PCB built on RO4350B substrate with Tg 280°C for the application of TV antenna. It's 1.60 mm thick without solder mask; Black silkscreen is directly on the substrate and immersion gold is on pads for soldering. The base material is used from

High Frequency PCB On 1.6mm RO4350B With Immersion Gold (Printed circuit boards are custom-made products, the picture and parameters shown are just for reference) General description This is a type of double sided high frequency PCB built on RO4350B substrate with Tg 280°C for the application of WiFi Booster. It's 1.60 mm thick without solder mask; Black silkscreen is directly on the substrate and immersion gold is on pads for soldering. The base material is used from Rogers

Rogers RO3003 RF PCB bonding with FastRise-28 Prepreg for High Speed Signal Transmission (PCB's are custom-made products, the picture and parameters shown are just for reference) Rogers RO3003 high frequency circuit materials are ceramic-filled PTFE composites intended for use in commercial microwave and RF applications. It was designed to offer exceptional electrical and mechanical stability at competitive prices. The mechanical properties are consistent. This allows the

Why do we need to use via in PCB? And its Parasitic Capacitance and Parasitic Inductance Tag# PCB design, Multi-layer PCB, High density interconnection PCB PCB holes Via is one of the important parts of multi-layer PCB, and the cost of drilling usually accounts for 30% to 40% of the cost of PCB fabrication. Briefly, every hole in the PCB can be called a via. From the point of view of function, the hole can be divided into two categories: one is used as the electrical

What is Stripline and microstrip line in PCB? Tag# RT/duroid 5880 Tag# Rogers 5870 Rogers RT/duroid 5870 and 5880 glass microfiber reinforced PTFE composites are designed for exacting stripline and microstrip circuit applications. Today we’re learning what stripline and microstrip line are. Stripline: a banded line that walks in the inner layer and is buried inside the PCB, as shown below The brown part is the conductor, the green part is the PCB insulating dielectric,

F4B High Frequency PCB DK 2.2 PTFE PCB with 3.0mm Thick 1oz Copper and HASL Lead Free for Patch Antenna (PCB's are custom-made products, the picture and parameters shown are just for reference) Hello everybody, Today we talk about a type of F4B high frequency circuit board at 3.0mm thick. F4B series high frequency material is mainly PTFE glass fiber cloth and ceramic-filled PTFE glass fiber cloth etc. It is a series of high frequency materials of Chinese brand, which is cheap

RF PCB Built on 6.15 DK RF-60TC 10mil, 20mil, 30mil and 60mil Coating with Immersion Gold, Tin, HASL and OSP for Miniaturized Antenna (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) RF-60TC is a ceramic-filled PolyTetraFluoride(PTFE) based (fiberglass substrate for the PCB of high power RF and microwave applications. It is designed to provide lower operating temperature in high power applications and the 6.15DK market