Rogers PCB Board

Rogers RO4730G3 60mil 1.524mm High Frequency PCB Cellular Base Station Antenna PCB Rogers RO4730G3 antenna grade laminates are reliable, low-cost alternative to the conventional PTFE-based laminates. It has the mechanical and electrical properties that antenna designers need. The materials have a dielectric constant of 3.0 and a loss tangent of 0.0022 measured at 2.5 GHz when using LoPro Reverse Treated EDC foil. These values allow antenna designers to realize substantial

Rogers RO3035 RF Printed Circuit Board 2-Layer Rogers 3035 60mil 1.524mm Microwave PCB with Immersion Gold (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) Rogers RO3035 high frequency circuit materials are ceramic-filled PTFE composites intended for use in commercial microwave and RF applications. It was designed to offer exceptional electrical and mechanical stability at competitive prices. The mechanical properties

Rogers RO3006 High Frequency PCB 2-Layer Rogers 3006 10mil Circuit Board DK6.15 DF 0.002 Microwave PCB (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) Rogers RO3006 high frequency circuit materials are ceramic-filled PTFE composites intended for use in commercial microwave and RF applications. It was designed to offer exceptional electrical and mechanical stability at competitive prices. The mechanical properties are

Rogers 40mil CLTE-XT 1.016mm High Frequency PCB CLTE Woven Glass Reinforced PTFE Microwave PCB (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) General Description This a a type of double-sided high frequency PCB built on 40mil (1.016mm) CLTE-XT substrates with green solder mask and white silkscreen printed on component sides. The pads are protected by immersion gold with minimum 2 microinch gold over 120 micoinch

Rogers DiClad 880 High Frequency PCB 20mil 30mil 60mil with Gold, Tin and Silver (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) Brief Introduction Rogers DiClad 880 PCBs are woven fiberglass reinforced, PTFE-based composites (without ceramic fillers) that offer lower dielectric constant and dissipation factors by using fewer plies of woven fiberglass and a higher ratio of PTFE content. Their DK and DF value are

IsoClad 917 High Frequency PCB on 20mil (0.508mm) Substrate with Immersion Gold and Green Solder Mask (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) General Description This is a type of double sided wrap-around antenna PCB built on 20mil substrate, cladding 0.5oz copper plated to 1oz. The boards has a size of 126mm long by 95mm wide used on intelligent helmet. Surface finish on pads or exposed tracks is chemical

2-Layer CLTE-MW PCB | 2.9mil Core | Immersion Gold Finish Product Overview We are pleased to present this newly customized 2-layer rigid PCB engineered for millimeter-wave and high-frequency applications where thickness constraints are critical. Built on CLTE-MW laminate—a high-performance, cost-effective material system—this board is specifically designed for 5G and other millimeter-wave designs requiring precise signal-to-ground spacing. The board measures 76.4mm x 95mm

What is Rogers TMM10? Rogers TMM10 is a high-dielectric-constant (Dk 9.20) thermoset microwave laminate designed for circuit miniaturization and high-reliability applications. It combines the electrical performance of ceramic substrates with the processability of thermoset materials—without requiring specialized PTFE processing techniques. TMM10 enables up to 70% size reduction in passive components compared to low-Dk materials, making it ideal for satellite communications,

2-Layer CLTE-MW PCB | 2.9mil Core | Immersion Gold Finish Product Overview We are pleased to present this newly customized 2-layer rigid PCB engineered for millimeter-wave and high-frequency applications where thickness constraints are critical. Built on CLTE-MW laminate—a high-performance, cost-effective material system—this board is specifically designed for 5G and other millimeter-wave designs requiring precise signal-to-ground spacing. The board measures 76.4mm x 95mm

Introduction In the most demanding high-frequency and millimeter-wave applications—where signal integrity, minimal insertion loss, and consistent electrical performance are paramount—material selection becomes the single most critical design decision. Rogers RT/duroid® 5880 represents the gold standard in ultra-low-loss PTFE-based laminates, delivering the lowest electrical loss among reinforced PTFE materials while maintaining exceptional dielectric constant uniformity.

The Ideal Foundation for High-Frequency Circuit Design: DiClad 527 Laminates and Their PCB Application In today's rapidly evolving landscape of wireless communications, radar systems, and high-speed digital networks, the performance of high-frequency printed circuit boards (PCBs) directly determines the success or failure of the entire system. For circuits operating at high frequencies, signal integrity, low transmission loss, and stable electrical performance are the core

2-Layer RT/duroid® 6006 PCB | 10mil Core | Immersion Silver Finish Product Overview We are pleased to present this newly customized 2-layer rigid PCB built on Rogers RT/duroid® 6006 high-frequency laminate. As a ceramic-PTFE composite specifically engineered for electronic and microwave circuit applications requiring a high dielectric constant, this material enables significant circuit size reduction while maintaining excellent electrical performance. The board is supplied as