QSFP+ Transceiver

100G QSFP28 1310nm 100G LR4 100GBASE-LR4 Single Lambda LR4 10KM LC DOM PRODUCT DESCRIPTIONS This product is a transceiver module designed for 10km optical communication applications. The module incorporates one channel optical signal, on 1310nm center wavelength, operating at 50Gbaud data rate. The transmitter path incorporates an EML Driver and a cooled EML together. On the receiver path, the input optical signal is coupled to a Pin photodiode detector. A DSP based gearbox

QSFP to SFP+ Adapter QSA Module 40G QSFP Breakout to 10G SFP+ Cage Only Hilink's QSFP to SFP+ Adapter (QSA) Module offers 10 Gigabit Ethernet connectivity for Quad Small Form-Factor Pluggable (QSFP)-only platforms. It allows smooth and cost- effective migration to 40 Gigabit Ethernet by providing an option to use lower-speed Enhanced Small Form-Factor Pluggable (SFP+) modules in empty QSFP ports or when the other end of the network is running at lower speeds. The QSA Module

400Gb/s QSFP-DD LR4 10km SMF Optical Transceiver Duplex LC connector PRODUCT FEATURES QSFP-DD MSA compliant 4 CWDM lanes MUX/DEMUX design 100G Lambda MSA 400G-LR4 Specification compliant Up to 10km transmission on single mode fiber (SMF) with FEC Operating case temperature: 0 to 70oC 8x53.125Gb/s electrical interface (400GAUI-8) APPLICATIONS • 400G Ethernet • Data Center Interconnect • Infiniband Interconnect • Enterprise Networking DESCRIPTIONS This product is a 400Gb/s QSFP

400G QSFP-DD LR4 1310nm 10km Optical Module Duplex LC Connector for Infiniband Interconnects PRODUCT FEATURES QSFP-DD MSA compliant 4 CWDM lanes MUX/DEMUX design 100G Lambda MSA 400G-LR4 Specification compliant Up to 10km transmission on single mode fiber (SMF) with FEC Operating case temperature: 0 to 70oC 8x53.125Gb/s electrical interface (400GAUI-8) APPLICATIONS • 400G Ethernet • Data Center Interconnect • Infiniband Interconnect • Enterprise Networking DESCRIPTIONS This

HL-QSFP-40G-LR4 10KM LR4 1310nm LC SFP 40G Ethernet LR QSFP+ Module General The HL-QSFP-40G-10KM is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for InfiniBand QDR/DDR/SDR, 10G/8G/4G/2G fiber channel, PCIe and SAS Applications. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10.3Gbps operation for an aggregate data rate of 40Gbps 10km using single mode fiber. These modules are designed to operate

HL-QSFP28-eZR4-100KM 100G Optical Module eZR4 SMF LC DOM DESCRIPTIONS HILINK HL-QSFP28-eZR4-100KM transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 80km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and support 10G Ethernet ZR and 10G Fibre Channel.Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The transceiver designs are

40G QSFP+ SWDM4 Shortwavelength 850~940nm 4Lanes Dual MMF LC Transceiver Module Hilink 40G QSFP+ SWDM4 transceiver modules are designed for use intransceiver modules are designed for use in 40G Ethernet links over duplex multimode fiber. Four channels/lanes in the 850-940nm region @ 10Gbps to transport the Ethernet signal. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA. Item No. HL-QSFP-40G-SWDM4 Vendor Name Hilink Form Type

100GBASE-ZR4+ 100km 1295 ~1304nm SMF 100km SMF with FEC QSFP28 Optical Module Transceiver PRODUCT FEATURES QSFP28 MSA compliant Hot pluggable 38 pin electrical interface 4 LAN-WDM lanes MUX/DEMUX design 4x25G electrical interface Maximum power consumption 6.5W LC duplex connector Supports 103.125Gb/s aggregate bit rate Up to 80km transmission on single mode fiber Operating case temperature: 0℃ to 70℃ Single 3.3V power supply RoHS 2.0 compliant APPLICATIONS 100GBASE-ZR4 100G

80km 1310nm SMF LC Duplex Optical QSFP Gbic Transceiver QSFP28 100G ZR4 DOM 100G QSFP28 ZR4 HL -Q31C-ZR4 is designed for 80km optical communication applications. This module contains 4- lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter- face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. Features QSFP28 MSA compliant Hot pluggable 38 pin electrical interface 4 LAN

100G 100KM Long Distance LAN WDM 100Gb/s ZR4 SMF LC Connector DESCRIPTIONS QSFP28 transceiver modules are designed for 100 Gigabit Ethernet over single mode fiber. They are compliant with the QSFP28 MSA, 100GBASE-ZR4+. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA. QSFP28 are compliant with RoHS. PRODUCT FEATURES Compliant with QSFP28 MSA 4 cooled 25Gb/s channels LAN WDM EML TOSA 4 channels SOA PIN photo detector Single +3

100G Ethernet Compatible 10KM CWDM QSFP28 CWDM4 10KM LC Connector SMF SFP Transceiver DOM General: The HL-QSFP28-CWDM4 is a transceiver module designed for 10km optical communication applications. The design is compliant to 100GbASE-LR4 of the IEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02 standard . The module converts 4 inputs channels (ch) of 25.78 Gbps to 27.95Gbps electrical data to 4 lanes optical signals,

QSFP28 CWDM4 Hot Pluggable 10KM SFP Transceiver Duplex LC Connector SMF Module General: The HL-QSFP28-CWDM4 is a transceiver module designed for 10km optical communication applications. The design is compliant to 100GbASE-LR4 of the IEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02 standard . The module converts 4 inputs channels (ch) of 25.78 Gbps to 27.95Gbps electrical data to 4 lanes optical signals, and

Hilink Fiber Optic Module 40G QSFP+ 60KM ER4 LC Transceiver With High Quality 1270-1330nm Plz leave which compatible switch you need!! 40G QSFP ER4 transceiver module designed for 60km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G694.2. It contains a duplex LC connector for the

QSFP+ 4 Channels MMF/SMF Universal Module 40G-UNIV-QSFP+ Transceiver Module Hilink QSFP-40G-UNIV is a QSFP 40GbE transceiver with a duplex LC connector that can be used with both multi-mode (MM) and single-mode (SM) fiber. It has 4 channels of 10G multiplexed inside the module to transmit and receive an aggregate 40G signal over 2 strands of fiber. It is called Universal because of its ability to operate with both MM and SM fiber without the need for any software / hardware

QSFP+ 40G PSM LR4 10KM MPO/MTP QDR/DDR Infiniband Compliant Optical Module Hilink 40G QSFP+ PSM LR4 is a transceiver module designed for 10km optical communication applications. The design is compliant to 40GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de

QSFP+ 40G ZR4 Lite 60KM Dual LC Infiniband QDR/DDR Optical Transceiver Hilink 40G QSFP+ 60km optical transceiver integrates the transmit and receive path onto one module. Four electric-absorption modulated lasers (DFBs) with 1270~1330nm center wavelengths, which multiplexed/demutiplexed into a single-mode fiber through an industry-standard LC connector. Each data steam is recovered by a APD photodetector and transimpedance amplifier, retimed, and passed on to an output driver

QSFP+ 40G LWDM ZR4 80KM Reach Dual LC Infiniband QDR Optical Transceiver Hilink 40G QSFP+ ZR4 optical transceiver integrates the transmit and receive path onto one module. Four electric-absorption modulated lasers (DFBs) with 1295.56nm, 1300.05nm, 1304.58nm and 1309.14nm LAN WDM center wavelengths, which multiplexed/demutiplexed into a single-mode fiber through an industry-standard LC connector. Each data steam is recovered by a APD photodetector and transimpedance amplifier,

100G-Base QSFP28 SWDM4 Wavelength 850-940nm Fiber Optical Transceiver LC Connector The 100G QSFP28 SWDM4 transceiver modules are designed for use in 100G Ethernet links over duplex multimode fiber. Four channels/lanes in the 850-940nm region @ 25.78Gbps to transport the Ethernet signal. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP28 MSA. FEATURES & BENEFITS : • Compliant with QSFP28 MSA • Compliant with SWDM MSA • Compliant with

100G QSFP28 SWDM4 MMF 150m Fiber Optical Transceiver Duplex LC for Data Center Kindly Remind : Tell us your needed compatibility ! This 100GBASE Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The QSFP-100G modules are our new generation of

New Product High Speed 5G Network QSFP28 100G 4*25G EZR4 100KM SM With DDM With Duplex LC Connector Module This 100G QSFP28 eZR4 is designed for 100km optical communication applications. ThisTransceiver Module contains 4-lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. Transceiver Block Diagrams Product Name