Optical Transceiver Module

Hilink 10G WDM ZR 80KM SMF 1490NM /1550NM EML+APD Digital Diagnostic Monitor Interface Product Description Parameter Symbol Min. Typ Max. Unit Note Transmitter Operating Wavelength λ 1470 1490 1510 nm 1530 1550 1565 Ave. output power (Enabled) PAVE 0 5 dBm 1 Side-Mode Suppression Ratio SMSR 30 dB Extinction Ratio ER 9 dB RMS spectral width Δλ 1 nm Rise/Fall time (20%~80%) Tr/Tf 50 ps Dispersion penalty TDP 3.2 dB Relative Intensity Noise RIN -128 dB/Hz Output Optical Eye

QSFP28 100G EZR4 100KM SM LAN WDM EML& PIN With Duplex LC Transceiver Module With FEC Product Description This 100G QSFP28 eZR4 is designed for 100km optical communication applications. This module contains 4-lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. Recommended Operating conditions Parameter Symbol Min.

QSFP28 100G LR1 Single Lambda 1310nm SMF Dual LC 10KM Optical Transceiver Module Hilink's 100G QSFP28 LR 10km Single Lambda with FEC optical transceiver is with full real-time digital diagnostic monitoring and pull tab. It's designed for 10km optical communication applications. The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP28 Multi-Source Agreement (MSA).It has been designed to meet the harshest

100GBASE-BX20 QSFP28 1280nm-TX/1310nm-RX 20km DOM Simplex LC Features: Supports 100GBASE-LR1-20 BIDI Lane signaling rate 106.25Gb/s with PAM4,111.8Gb/s compatible Up to 20km transmission on SMF EML Laser and PIN receiver 4x25.78Gb/s with NRZ electrical interface (CAUI-4) High speed I/O electrical interface 2C interface with integrated Digital Diagnostic monitoring QSFP28 MSA package with simplex LC connector Single +3.3V power supply Support HW TX_DIS and RX_LOS for telecom

100G BIDI 20KM QSFP28 BIDI QSFP+ LR 1280nm/1310nm LC Connector SMF QSFP28 Transceiver GENERAL It is a Pluggable, LC, Fiber-Optic QSFP+ Transceiver for 100 Gigabit Ethernet Applications. It integrates four electrical data lanes in each direction into transmission over a single LC duplex fiber optic cable. Each electrical lane operates at 25.78125 Gbps and conforms to the 100GE XLPPI interface. PRODUCT FEATURES Supports 100GBASE-LR1-20 BIDI Lane signaling rate 106.25Gb/s with

100GBASE-BX20 QSFP28 1310nm-TX/1280nm-RX 20km DOM Simplex LC SMF Optical Transceiver Module Features: Supports 100GBASE-LR1-20 BIDI Lane signaling rate 106.25Gb/s with PAM4,111.8Gb/s compatible Up to 20km transmission on SMF EML Laser and PIN receiver 4x25.78Gb/s with NRZ electrical interface (CAUI-4) High speed I/O electrical interface 2C interface with integrated Digital Diagnostic monitoring QSFP28 MSA package with simplex LC connector Single +3.3V power supply Support HW

Optical Module SFP-10G-LR 1310nm 20km DFB+PIN SFP+ Transceiver Specs: Duplex LC Connector Support hot-pluggable Metal with lower EMI Excellent ESD protection DFB Transmitter and PIN Receiver Typical Center Wavelength:1310nm Max link length up to 20Km on SMF RoHS Compliant and Lead-Free Digital diagnostic compatible with SFF-8472 Case Operation Temperature:-5℃~+70℃ Single 3.3V power supply and Low power dissipation Order details confirmed,please tell us the model and quantity

100GBASE-BX20 QSFP28 1310nm 1280nm 20km DOM Simplex LC SMF Optical Transceiver Module The Compatible QSFP28 transceiver provides 100GBase-BX throughput up to 20km over single-mode fiber (SMF) using a wavelength of 1310nmTx/1280nmRx ,1280nm Tx/1310nm Rx via an LC connector. This bidirectional unit must be used with another transceiver or network appliance of complimenting wavelengths. Digital diagnostics functions are also available via the I2C interface, as specified by the

DWDM System 200G Ethernet CFP2 200G CFP2 DCO MR Module For Uint-4(OUT4) GENERAL This document describes the product specifications for coherent 200G CFP2 DCO modules based on dual polarization quadrature amplitude modulation (DP-16QAM) supporting extended C-band, polarization diversity coherent detection and advanced electronic link equalization. The module can accommodate various client signals such as 100 Giga-bit Ethernet (100GbE ) and Optical Transport channel Uint-4(OUT4

400G-QSFP-DD-LR4 1310nm 10KM QSFP-DD LR4 10km Singlemode Optical Module DDM GENERAL This product is a 400Gb/s Quad Small Form Factor Pluggable double density (QSFP DD) optical module designed for 10km optical communication applications. The module converts 8 channels of 50Gb/s (PAM4) electrical input data to 4 channels of CWDM optical signals, and multiplexes them into a single channel for 400Gb/s optical transmission. Reversely, on the receiver side, the module optically de

100G QSFP28 SWDM4 850~940nm 4 Channels 4*25G MMF Dual LC Optical Module Hilink 100G QSFP28 SWDM4 transceiver modules are designed for use in 100G Ethernet links over duplex multimode fiber. Four channels/lanes in the 850-940nm region @ 25.78Gbps to transport the Ethernet signal. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP28 MSA. Item No. HL-Q28-100G-SWDM4 Vendor Name Hilink Form Type QSFP28 Max Data Rate 100Gbps Wavelength 850

Ethernet Rate 100G and OTU4 CFP 40KM ER4 LAN-WDM SMF Dual LC Optical Transceiver HiLink's CFP 100G ER4 transceivers are designed for use in 100 Gigabit Ethernet links over 40km single mode fiber, and it compliant to the CFP MSA and IEEE 802.3ba 100GBASE-ER4. Digital diagnostics are available via MDIO as specified in the CFP MSA Management Interface Specification. The transceiver's designs are optimized for high performance and cost efficiency to provide customers the best

Hot Pluggable 100G 10KM CFP LR4 LAN-WDM SMF Dual LC Single mode Optical Transceiver HiLink's CFP 100G LR4 transceivers are designed for use in 100 Gigabit Ethernet links over 10km single module fiber, and it compliant to the CFP MSA and IEEE 802.3ba 100GBASE-LR4. Digital diagnostics are available via MDIO as specified in the CFP MSA Management Interface Specification. The transceiver's designs are optimized for high performance and cost efficiency to provide customers the

Low Price QSFP28 100G LR4 LAN-WDM 4*25G Channels 1310nm SMF Dual LC 10KM Optical Transceiver The Hilink’s 100G QSFP28 LR4 is a 4x25G single-mode fiber, hot pluggable optical transceiver. It enables the integration of 4 transmitters, 4 receivers and an optical MUX/ DeMUX into a small form factor package that delivers up to 112 Gbps data link in a compact QSFP28 footprint. The optical connectivity is based on two Singlemode Fiber (SMF) LC connectors, one for Tx and one for Rx.

QSFP28 100G ZR4 1310NM 60KM 5G Module Compatible With The Brand Fiber Optic Transceiver Module Features Supports 103.125 Gb/s to 111.81 Gb/s OTU4 Transmitter: cooled 4x25Gb/s LAN WDM EML TOSA (1295.56, 1300.05, 1304.58, 1309.14nm) Receiver: 4x25Gb/s APD ROSA Up to 60km reach for G.652 SMF Duplex LC optical receptacle 4x25G electrical interface (OIF CEI-28G-VSR) RoHS-10 compliant and lead-free Single +3.3V power supply Maximum power consumption 4.5W Case operating temperature

Telecommunication Equipment 10G Base SFP+ DWDM 80KM 100GHZ CH17-CH61 Duplex LC Connector Optical Module Features Supports 9.95 to 11.3 Gb/s bit rates Duplex LC connector Hot pluggable SFP+ footprint Cooled EML transmitter and APD receiver Applicable for 80km SMF connection Low power consumption, < 1.5W 100 GHz channel spacing 0.8nm Digital Diagnostic Monitor Interface Optical interface compliant to ITU-T 694.1& G.698.1 Electrical interface compliant to SFF-8431& SFF-8432

Hilink 10G SFP+ CWDM ZR 80KM Long Distance 1470-1610 Fiber Optic Module Transceiver 10G CWDM Transceivers CWDM XFP(10G) CWDM XFP LR 10G (1270-1330nm) 10KM CWDM XFP 0~70°c CWDM XFP ER 10G (1470-1610nm) 40KM CWDM XFP 0~70°c CWDM XFP ZR 10G (1470-1610nm) 80KM CWDM XFP 0~70°c CWDM SFP+(10G) CWDM SFP+(10G) LR 10G (1270-1330nm) 10KM CWDM SFP+ 0~70°c CWDM SFP+ ER 10G (1470-1610nm) 40KM CWDM SFP+ 0~70°c CWDM SFP+ ZR 10G (1470-1610nm) 80KM CWDM SFP+ 0~70°c CWDM XENPAK(10G) CWDM XENPAK

Profession Factory Supply Price 100G Optical Module QSFP28 LR4 10km COB Unidirectional Compatible with Brands Modle HL-QSFP-100G-LR4 COB Vendor Name Hilink Form Type QSFP28 Max Data Rate 100G Wavelength 1310NM Max Cable Distance 10km Interface LC Certificates CE/Rohs Product Name 100G QSFP28 Transceiver DOM Support Yes Commercial Temperature Range 0 to 70°C (32 to 158°F) HTS-Harmonized Code 851779500 Product Description This product is a 100Gb/s transceiver module designed

4 Channel Single Mode Fiber Duplex LC Connector 200G QSFP56 FR4 1310NM 2KM Hilink Fiber Optic Module Product Description The Hilink 200G QSFP56 FR4 is a 4×50Gbps singlemode fiber, hot pluggable optical transceiver. 200G QSFP56 FR4 enables the integration of 4 transmitters, 4 receivers and an optical MUX/DeMUX into a small form factor package that delivers a 200Gbps data link in a compact QSFP56 footprint. The optical connectivity is based on two Singlemode Fiber (SMF) LC

QSFP28 100G ZR4-lite 60KM SMF Dual LC EML+PIN Optical Transceiver Modules with FEC Hilink QSFP28 ZR4 Lite is designed for 60km optical communication applications. This module contains 4-lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. Item No. HL-QSFP28-ZR4-Lite Vendor Name Hilink Form Type QSFP28 Max Data Rate