Cable Testing Equipment

UL 60335-2-24-Figure 101.DVA.1 – Articulate probe with flat and cone shaped hand 3.5 – 4.5 year age Notes: 1 – The probes were designed with a center pin to rotate the hand with respect to the lower arm. That motion can be equivalently represented by rotating the probe. 2 – The finger ″tip″ is developed to match the dimensions of the UL articulated probe. The diameter from the tip to the first joint then tapers from the tip dimensions to the finger diameter. The joints are

Toy Bite Tester / Simulation Of Children's Teeth For Testing Toys' Outstanding Components and Accessories Application Toy Bite Tester is simulation of children's teeth, to test the surface of toys outstanding components and accessories to withstand the power of child biting. Specification Model KP-TB89 Material SUS304 stainless steel Dimension 89*42*47cm Weight 756g Packing:

EN 50636 Figure 1 Test Finger Probe Young Adult Arm Probe Stainless Steel Probe Standard description Our product of Test Finger Probe (see Figure 1)shall not to be able to make contact with the hazardous moving parts when it is inserted into the opening up to the entire length of each arm probe.the articulations of each probe shall be manufactured to enable a rotation±90° about the articulations axis.The movements of the joints of each probe shall be free enough to allow easy

Flat Probe as per EN 60598-2-20 clause 20.12.3 This flat probe, 0.5 mm thick and 8 mm wide, with a rounded tip having a radius of 4 mm. It shall not be possible to touch live parts with this probe, when it is applied in any position with a force not exceeding 0,5 N, the chain being fitted with the lamps with which it is delivered. Conform to EN 60598-2-20 clause 20.12.3

CSA C22.2 No.47-13 Figure 1 Articulated Probe The UL Metal Articulated Probe is a standard articulated finger as required by Underwriters Laboratories in many of their standards. It is a jointed test probe specifically designed to test equipment likely to be accessible by children. This probe also applies to more stringent international standards for hazardous parts access, such as IEC 62368-1. It is widely used in the enclosure protection test of the electrical equipment.

Test finger nail , IEC 60335-1 Figure 7 Test Equipment Test finger nail Product information: The test finger nail complies with the IEC 60335-1figure 7 standard requirements. It is applicable for the non-removable components which are used for electric shocking water or touching the movement parts to see whether they can go through the mechanical stress that happened in normal use. Thus to judge the components conform to the required protection grade or not. Three kinds of

IEC62368 Annex V.1.3 Test method 2 Unjointed test probe Openings tested with straight unjointed test probes Openings preventing access to a part by the applicable jointed test probe of Figure V.1 or Figure V.2 are further tested by means of a straight unjointed version of the respective test probe applied with a force of 30 N. If the unjointed probe enters the openings, test method 1 is repeated, except that the applicable jointed version of the test probe is pushed through

IT Test Probe Ø12mm, 80mm long with tip radius 6mm Conforms to IEC60950, GB4943

Test Probe B , IEC61032-Figure 2 , IEC test equipment IEC61032 Figure 2, Diameter: 12mm Length:80mm Insulated portion: Ø50mm, 20mm wide,100mm long IEC61032 Equipment list No. Items Description Photo 1 IEC61032 Test Probe A IEC61032 Figure 1 1. Ball Diameter: 50mm 2. Baffle Plate Diameter: 45mm 3. Baffle Plate Thickness:4mm 4. Handle Diameter: 10mm 5.Handle Length :100mm 2 IEC61032 Test Probe B IEC61032 Figure 2, Diameter: 12mm Length:80mm Insulated portion: Ø50mm, 20mm wide

EC61032 Figure 7 Device 11 Rigid Test Finger Probe Products information: This rigid finger probe conforms to the standard requirement of IEC61032 figure 7 device 11,IEC60884,IEC60598,IEC60335,IEC60065. It is used to verify the protection of persons against access to hazardous parts, and to verify the mechanical strengthen of openings in the enclosure or internal barriers. Customizable: It can be used for anti-electric shock test when equipped with amphenol connector. Or used

Static Flexibility Tester For Checking Mechanical Strength of Completed Flexible Cables / Rubber Insulated Cables Product Introduction: This apparatus conforms to IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.2 and Figure 2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods. It is used for checking mechanical strength of completed flexible cables. This test

Screwed Glands Tester IEC60598-1 clause 4.12.5 Torque Tests On Glands Product details: The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5. Screwed glands shall be fitted with a cylindrical metal rod having a diameter equal to the nearest whole number of millimetres below the internal diameter of the packing. The glands shall then be tightened by means of a suitable spanner, the moment shown in following Table being applied to the spanner

IEC60669 IEC60884 Clamping Device Arrangement For Checking Damage To Conductors Product overview: This testing machine is also called the test apparatus for checking damage degree of wire which confirms to many standards such as IEC60669, IEC60884 and so on. This compliance is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requirement of non over-damage to the wire. Besides, it is also used to check whether the

IEC60335-1 Clause 22.16 Automatic Cord Reels Endurance Tester / Cord winding test device Overview This device complies with the requirements of Clause 22.16 of IEC60335-1:22.16 and GB4706.1. It is the structure for detecting automatic reel of household and similar electrical appliances. Does it cause excessive scratching or damage of Flexible cord sheath? Dedicated testing equipment for excessive wear of broken strands and contacts. It adopts multi-functional fixture, large

Temperature-measuring and accessibility probe-UL923 Figure 37.1 37 Surface Temperature Tests 37.1 General 37.1 .1 An appliance employing a resistance-type element, such as a browning, cooking, or convection element, shall not attain temperatures at specific points greater than those indicated in Tables 37.1 and 37.2. The appliance is to be completely assembled for this test, with all handles, knobs, guards, and the like, mounted in place. See 37.1 .6. Exception: The

UL 1278 Figure 10.1 Cone Test Finger Probe for Heating Elements Product details: This probe conforms to the standard requirement of UL1278 Fig 10.1. The handle is made of nylon while the probe is made of stainless steel. Standard:UL1278 Fig 10.1. Application:The heating element and any part of the element assembly (such as an element support, sheath and similar parts) shall be so guarded that flammable material as well as persons will be protected against contacting it. Test

UL749 Figure 3 Knife Probe for Dishwasher Protective Testing Product details: It conforms to standard requirement of UL749 Fig 3. It is a dedicated instrument for household dishwasher protective testing. It is an essential test instrument to detect the safety performance of the relevant household appliance. The handle is made of Nylon and the probe is made of stainless steel. Standard:UL749 Fig 3 Application: It is a dedicated instrument for household dishwasher protective

Wedge Probe For Document Shredder The wedge probe is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that children and small women could touch hazardous parts of some shredders. The KP1105 is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that children and small women could touch hazardous parts of some shredders. The other probe now required in the standard is UL Articulated Finger Probe, Model

UL507-figure 8.1 Probe for impellers of portable appliances ,Hazardous Moving Parts Probe Parameter: 1,Total Length:88.9mm(3.5inch) 2,Head Length:25.4mm(1inch) 3,Head Radius:R3.175mm(1/8inch) 4,Former Head Diameter:12.7mm(1/2inch) 5,Tail Diameter:25.4mm(1inch) UL 507 Electric Fans 8.2.5 Conventional designs of impellers meet the requirement of being guarded when: a) The relationship between mass (W) in kg, radius (r) in mm, and speed (N) in revolutions per minute is such that

UL1005 Electric Flatirons -Figure 7.1 Probe 7.7 An opening in the enclosure of a flatiron located within 1 in (25.4mm) of the soleplate surface is acceptable if the probe illustrated in Figure 7.1 , when inserted point first, cannot be made to touch any uninsulated live part. Data to be calibrated Test Point Nominal Value (mm) Actual Value (mm) Deviation (mm) Limit (mm) Uncertainty (mm) P/F A φ31.8 ±0.159 B 75.0 ±0.375 C 15.9 ±0.1 D 0.81 ±0.05 E 6.4 ±0.1 F 3.2 ±0.1 Packaging