Cable Testing Equipment

IEC60540 Wire Core Circular Insulation Cable Testing Equipment Cold Bending Test Machine Product information: This test conforms to the standard requirements of IEC540. It is used for cold bend test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the mandrel shall be between 4 and 5 times the

Low Temperature Test Chamber Product information: The low temperature test chamber conforms to IEC540 standard which is applicable for the low temperature test of the electric wire and electrical accessories. Technical parameters: 1, Using temperature range:-10℃ ～ -70℃ 2, Temperature uniformity:≤2℃ 3, Cooling time:≤50 minutes(empty case) 4, Cooling rate:0.70C～1.00C 5, External dimension:1230X680X930MM 6, Internal dimension:150 litre 7, Power supply:220V±5%,50Hz 8, Input power

PVC Wire / Cable Cracking Resistance Winding Test Apparatus GB/T2951.31.9-2008 Product information: This test device conforms to the standard requirement of GB/T2951.31.9-2008. It is applicable for the PVC wire and cable to do the winding test before the split test in the condition of high temperature. It is the auxiliary means for the split test. It is also used for the winding test of the soft wire of other industries. Technical parameters: 1, Maximum diameter of coiling:

100MΩ / 200MΩ Cable Testing Equipment Multifunctional Tester For Plug Cords Product information: This test device is a multifunctional tester for plug cords or power cables. It is used for a comprehensive test of electrical characteristics including the performance of breakover, polarity, insulation resistance; withstand voltage, copper exposed or electric leakage of the shuck and so on. The operation is easy and the testing speed is fast(900～1500 lines can be tested per hour

Wire Cable Spark Tester , Electrical Wire Spark Tester Product information: Wire Cable Spark Tester complies with the standard requirement of UL1581-1990. It is indispensable test equipment for testing the quality of insulating layer with high voltage during the productive process of electric wire and cable. These series of testers have good humidity resistance and Strong ability of anti-interference. Thus to make sure the transformer can work reliably for a long term in the

220V Oxygen Air Bomb Aging Test Chamber With Intelligent Control GB/T2951.12-2008 Product information: This aging tester conforms to the standard requirements of GB/T2951.12-2008 and GB/T5013－2008 as well as VDE. It is applicable for the aging test of the electric wire, the insulation layer and sheath of the rubber ( plastic,artificial leather) as well as other high polymer materials under the action of required pressure and temperature in the medium of oxygen and compressed

IEC61032 IEC60529 IEC60335 IEC61029 Electric Shock Test Probe B IP2X Bending test IEC61032 IEC60529 IEC60335 (Test probe B) is the necessary implement in protection against electric shock test for household and other have similar matter electrical appliances This is the “International” test finger required by most IEC61032 test probe B, EN and CSA Standards, in addition to many UL Standards. Built in strict accordance to the newest requirements with integral palm simulator.

IEC 60335-2-64 Test Probe B Of IEC 61032 With Circular Stop Face With A Diameter Of 56 Mm Parameter: 1,Jointed Finger Length:120mm(30/30/60mm); 2,Dam-board Diameter:56mm; 3,Standard:IEC60335-2-14|EN60335-2-14|GB4706.30 IEC60335-2-14|EN60335-2-14

IEC 60601-1- clause 15.5.2 Dielectric strength , Transformer Induction Withstand Voltage Tester Technical parameters: Output voltage: 100V~3000Vac Accuracy ± (1%+1V) Test current: 0.1mA~150.0mA Output power: 450VA Test time: 0,0.3~999.9s Accuracy: ± (0.5%+50ms) Output frequency: 40.0Hz~600.0Hz TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60601-1:2005 + Am.1:2012 Medical electrical equipment - Part 1: General requirements for basic safety and essential performanc

IEC 60601-1-Test Rod According to IEC 60601-1-clause 8.4.2 Diameter: 4.0(-0.05~+0)mm Length: 100(-0~+0.5)mm TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60601-1:2005 + Am.1:2012 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting 4.11 Power input Suitable devices for the voltage, current/power and frequency Supply: 1 phase

IEC 60601-1-Figure 6 Unjointed test finger IEC61032 Figure 2, Diameter: 12mm Length:80mm Insulated portion: Ø50mm, 20mm wide,100mm long TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60601-1:2005 + Am.1:2012 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting 4.11 Power input Suitable devices for the voltage, current/power

IEC 60601-2-3-Figure 201. 102- Test probe

IEC 60601-1-Figure 6 Standard test finger IEC61032 Figure 2, Diameter: 12mm Length:80mm Insulated portion: Ø50mm, 20mm wide,100mm long TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC 60601-1:2005 + Am.1:2012 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting 4.11 Power input Suitable devices for the voltage, current/power and

Surface Temperature Measuring Probe with Omega insulated thermocouple wire Standard: IEC 60335-2-9,IEC 60335-2-14 Parameters: Key A adhesive B thermocouple wires 0,3 mm diameter to IEC 60584-1 Type K (chrome alumel) C handle arrangement permitting a contact force of 4 N ± 1 N D polycarbonate tube: inside diameter 3 mm, outside diameter 5 mm E flat tinned copper disc: 5 mm diameter, 0,5 mm thick Packing:

UL 982 Figure 30.2 Blender Accessibility Probe For Blender Container Abuse Test UL 982-Figure 30.2 Blender Accessibility Probe for Blender Container Abuse Test 30.4.4 Blender container abuse 30.4.4.1 A blender container shall not break or crack during normal use. 30.4.4.2 A blender employing a thermoplastic container shall be subjected to the test outlined in 30.4.4.4– 30.4.4.7. 30.4.4.3 A blender employing a glass container shall be subjected to the conditioning and test

UL Test Probes UL Test Probe Test Pin Jointed Test Finger Test Fingernail Test Tongue UL standards Articulated Test Probes for electrical safety accessibility test on Protection of persons and equipment by enclosure – Probes for verification Applications: To verify protection of persons against access to hazardous live parts or hazardous mechanical parts To verify protection of equipment against ingress of solid foreign objects parts To verify protection of persons against

UL 82 UL 1447 Foot Probe EN 60335-2-2 Fig z101 , IEC 60335-2-92 Fig 103 Product details: It conforms to the standard of EN 60335-2-2 Fig z101, IEC 60335-2-92 Fig 103,UL 82 and UL 1447. The standard requires rotary power mowers to have protective shields. These shields prevent the operator's foot from contacting the blade, either under the mower's deck or in the discharge chute area, when the operator has his or her hands on the mower's controls. Generally, a shield must

Cord Anchorage Tester IEC 60335-1 Clause 25.15 / IEC 62368-AnnexG.7.3.2.1 The test machine is based on IEC 60601-1, IEC 62368-1, and IEC 60335-1 standards. It is designed for testing washing machines and other household appliances to assess the solidity of power cord clamping devices. The machine performs both tension and torque tests, featuring easy operation, a reasonable structure, and an attractive appearance. Technical Parameters Working power: AC220V 50/60HZ Tension:

IEC 60335-2-34 Annex CC Test Vessels with Pressure Relief Device Professional test vessels designed for aging tests on winding wires, compliant with IEC 60335-2-34 standards and equipped with integrated pressure relief safety systems. Technical Specifications Parameter Specification Test Object Winding Wire Reference Standard IEC 60335-2-34 Test Type Aging Test Power Supply 220V AC 50/60Hz Maximum Operating Pressure 4MPa Secure Burst Pressure 2.7~3.3MPa Temperature Range Room

IEC 60335-2-90 Test Rod for Door Interlock Concealment Product Overview IEC 60335-2-90-Figure101 Test rod designed for door interlock concealment testing applications. Technical Specifications Probe Length: 100±0.2mm Probe Diameter: 3 mm Handle Length: 20 mm Handle Diameter: 10 mm M6 thread at the tail for connecting push-pull force gauge Packaging and Shipping Secure packaging in aluminium and carton boxes to ensure product arrives intact and undamaged Shipping via DHL,