Bottom Entry Fill Valve

Universal Toilet Fill Valve With Brass Shank For Bottom Entry Toilet Universal toilet fill valve J0501 is a bottom entry float operated inlet valve for sanitary ware toilet. It could be fitted with brass inlet shanks and brass nut, especially when the inlet size is G3/8". It's endurable and anti-corrosion. As the structure is fully adjustable, this bottom entry fill valve could meet any working water level requirement for ceramic toilet and plastic cistern. Meanwhile, it's

Bottom Entry Toilet Tank Fill Valve , Easy To Adjust Working Water Level Specifications: Material: POM, ABS Net weight: 220g +/-3% Color: White, red Delay fill time: Optional Installation: Bottom Certificate: WRAS Inlet size: 1/2" BSP plastic Installation height: Adjustable from 220mm to 328mm (8.5"-13") Working water level: 110mm to 270mm Working pressure: 0.02Mpa-1.6Mpa (2.9 psi - 232 psi) Critical level: 35mm to the top Float adjustment range: no less than 70mm Filling

Two Way Filling Valve With Pom Plastic Inlet Shanks G1/2" Heavy Duty Design Specifications: Material: ABS, POM, rubber Net weight: 225g +/-3% Color: white, green Shank size: 1/2" BSP POM plastic Installation: Side or Bottom Float: 2-pc float Float adjustment range: no less than 50mm Critical level: 25mm to the top Working pressure: 0.02Mpa-2.0Mpa (2.9 psi - 290 psi) Installation height: 220mm to 328mm (8.5"-13") for bottom Working water level: 110mm to 270mm for bottom, 35mm

Toilet Cistern Inlet Valve With Wras Approval For One Piece And Two Pieces W.C. Toilet cistern inlet valve J0501 is a vertically installed float operated inlet valve for sanitary ware W.C. The inlet shanks are available in G3/8”, G1/2” and G15/16” for both POM plastic and brass material. All these sizes are based on British standard. Normally more customers choose to use brass inlet shank for size G3/8”. One of the important reasons is the thin screw need stronger material to

Easy Adjustment Bottom Entry Fill Valve For Ceramic / Plastic Cistern Features: Molded from ABS and POM raw material. Compact float design to match small and big tank. Adjustable height from 220mm to 328mm. Steady refilling, no splash. Delay fill for water conservation. Instant close after water reaches working level. Endurable shut-off seal. Wide water level adjustment range. 100% tested before shipment. Brief: Bottom entry tank fill valve J0601 is a compact design fill

Toilet Tank Fill Valve Simple Design With Easy Water Level Adjustment Float Toilet tank fill valve J0705 is a traditional simple design toilet inlet valve. It has simple one-piece float design. Its water shut-off structure locates at the bottom part. The operation water pressure is low, less than 0.8MPa. But it has much stronger tolerance for dirty water, compared with that of back pressure fill valve. The latter needs a large capacity external filter for dirty water

Side Entry / Bottom Entry Duo Toilet Fill Valve For Diy Market Specifications: Material: ABS, POM, rubber Net weight: 225g +/-3% Color: white, green Shank size: 1/2" BSP brass Installation: Side or Bottom Float: 2-pc float Float adjustment range: no less than 50mm Critical level: 25mm to the top Working pressure: 0.02Mpa-2.0Mpa (2.9 psi - 290 psi) Installation height: 220mm to 328mm (8.5"-13") for bottom Working water level: 110mm to 270mm for bottom, 35mm to 85mm below the

Dual Toilet Water Bottom Entry Fill Valve With Delay Fill For Toilet System Replacement Features: Transformable inlet shanks to fit side and bottom entry toilet. Heavy duty design. Fill valve operating pressure 0.2bar - 20bar. Silent filling, acoustic comfort. Suitable for plastic and ceramic toilet cisterns. Anti-siphon structure, no back flow. Logo printing and customized package optional. 100% responsible for quality. Specifications: Material: ABS, POM, rubber Net weight:

Universal Commode Bottom Entry Fill Valve For Toilet Flow Valve Replacement Brief information: Universal commode fill valve J0701 is the best toilet fill valve ever created for DIY market, especially for areas where side fill and bottom fill float valve are used, and / or both 3/8” BSP and 1/2” BSP are used. It’s a dilemma for a distributor and wholesaler to tackle how to assign percentage for side entry fill valve VS bottom entry fill valve, G3/8” VS G1/2”, or brass inlet

Silent Fill Toilet Cistern Inlet Valve For Replace Float Valve , Acoustic Comfort Features: Innovative delay fill design. Wide adjustment range to fit most toilet tanks. 100% tested before shipment. Injection molded from premium raw material. With embedded filter to screen out dirt. Easy to install, tool-free. Silent filling, acoustic comfort. Instant close after water reaches working level. Specifications: Material: ABS, POM, rubber Net weight: 230g +/-3% Color: White, green

1/2" BSP Toilet Intake Valve , Replacement Toilet Cistern Bottom Entry Inlet Fill Valve Toilet Intake Valve 1/2" BSP Bottom Entry For Toilet Tank Valve Replacement Brief information: Besides the adjustable heights from 220mm to 328mm, optional inlet shanks G3/8”, G1/2”, G15/16”, toilet intake valve J0704 has remarkable capacity to resist high pressure up to 20 bars due to the special float system. Normally the standard working pressure range for a bottom entry fill valve is

ABS Pro Toilet Bottom Entry Fill Valve Easy To Adjust Working Water Level Features: Adjustable height from 220mm to 328mm. Molded from premium raw material. Delay fill optional. Speedy refilling flow. Suitable for plastic and ceramic toilet cisterns. Endurable shut-off seal. Piece by piece inspection. Universal design for most of toilets. Long endurance, 5 years warranty. Specifications: Material: ABS, POM, rubber Net weight: 220g +/-3% Color: White, blue Installation height:

Compact Float Toilet Intake Valve Assembly For Toilet Tank Valve Replacement Toilet Intake Valve Assembly For Toilet Tank Valve Replacement Brief information: Toilet intake valve J0601 is a pre-assembled toilet fill valve for toilet part replacement. The adjustable height covers from 220mm to 328mm, universal for most requirements. The inlet shank size could be G3/8”, G1/2” or G15/16”. The lock nut of the inlet shank is designed with two wings which provide conveniences for

Low Noise Bottom Entry Fill Valve Fast And Quiet To Refill Toilet Cistern Tank Bottom Entry Fill Valve , Fast And Quiet To Refill Toilet Cistern Tank Bottom entry fill valve J0501 features in fast and quiet refilling performance. The filling rate could reach 4.5 liter per minutes at 0.5Mpa dynamic pressure. The acoustic noise level is lower than 40 DB which is comfortable for both home use and public application. Meanwhile, the telescopic pipe structure allows a wide

WRAS Universal Toilet Fill Valve Repair , Cistern Bottom Entry Float Valve Replacement WRAS Toilet Fill Valve, Univeral Toilet Cistern Float Valve Replacement Features: Endurable molded from premium plastic raw material. WRAS approval product. Wide water level adjustment range. Meet requirements of low pressure and high pressure. Steady refilling, no splash. Easy access for maintenance. Suitable for plastic and ceramic toilet cisterns. 100% responsible for quality. Long

White Toilet Cistern Fill Valve Bottom Entry , American Standard Toilet Fill Valve Toilet cistern fill valve J0301 could be adjusted from 9” to 13”, fit most of the toilet brand in American market. The inlet shank size is available in G1/2” and G15/16”. It shuts off by needle pin and could endure high pressure up to 2.5Mpa, suitable for area with high pressure water pressure. Meanwhile this toilet fill valve is the only model with integrated float system in our range, which

Adjustable Bottom Entry Fill Valve With G1/2" Brass , Compact Float Design Compact float design. Molded from premium raw material. Delay fill optional. Speedy refilling flow. Suitable for plastic and ceramic toilet cisterns. Endurable shut-off seal. Anti-siphon structure, no back flow. 100% quality check before shipment. 200,000 times of work life. Specifications: Material: ABS, POM, rubber Net weight: 220g +/-3% Color: White, blue Installation height: Adjustable from 220mm

Needle Type Toilet Bottom Fill Valve With High Pressure Resistance Made from strong high quality plastic material complied with ROHS. Meet requirements of extreme high pressure. Adjustable telescopic pipe every 5mm. Synchronous adjustment for inner float and outer float. Silent filling, acoustic comfort. Anti-siphon structure, no back flow. Instant close after water reaches working level. Steady refilling, no splash. Long endurance, 5 years warranty. Specifications: Material:

Toilet Fill Valve With Bottom Inlet Shank G1/2" Brass, Wras Approved Endurable molded from premium plastic raw material. WRAS approved. Meet requirements of low pressure and high pressure. Heavy duty design. 100% inspected before shipment. Superior finish and workmanship. Silent filling, acoustic comfort. Instant close after water reaches working level. Suitable for plastic and ceramic toilet cisterns. Easy access for maintenance. Specifications: Material: POM, ABS Net weight

Bottom Entry Fill Valve With Wras Approval For Sanitary Ware Toilet Every adjustable / telescopic toilet fill valve needs a pipe lock to fix the pipe height. We offer two types of pipe lock for your option: simple chip lock and ring-shape lock. The former is a simple design and easy to use, push in to lock and pull out to unlock. The latter one needs one more step - release the ring by holding the two taps between fingers. But it have one advantage - anti-missing, i.e., it