Side Entry Fill Valve

Universal Toilet Side Entry Fill Valve With Transformable Inlet Shanks , Brass Or Plastic Quick to fill: Universal toilet fill valve J0701 is designed with quick-to-fill structure. The filling rate is 5% faster at least than the requirements per domestic standard. The filling rate reaches 4.5 liters per minute at 0.5 Mpa. Per test data under different pressure range, our toilet fill valve keeps this advantage over others. And this advantage becomes more remarkable when the

Toilet Side Entry Fill Valve G1/2" Brass For Toilet Cistern Mechanisms Brief information: Toilet side entry fill valve J0401 is a typical toilet fill valve for side fill toilet. It has an integrated float system for easy water level adjustment. Normally adjustable bottom fill valve has more height adjust devices, including the telescopic pipe and float adjustment. But side inlet valve can only rely on the float adjustment to reach different water level. To solve the problem

Side Entry Fill Valve With Movable Inlet Shanks G3/8" For Bottom Installation Duo fill valve J0701 is a new design toilet inlet valve for DIY market. It’s created to solve the problem that side / bottom entry toilets need different types of fill valves. Dual fill valve provides a general solution of using one fill valve for all toilets. This fill valve has a dual water inlet internal pipe and transformable inlet shanks. It’s simple to use it – just install the inlet shank at

Dual Entry Cistern Inlet Valve With 3/8" Bsp For Toilet Cistern Part Replacement Features: Dual fill valve with movable inlet shank. Wide pressure range 0.2bar - 20bar. Delay fill duration reach 8 seconds at 3bar. Wide water adjustment range. No tools required, easy to install. Instant shut off after water level is reached. 100% inspected before shipment. Long endurance, 5 years warranty. Specifications: Material: ABS, POM, rubber Net weight: 225g +/-3% Color: white, green

2-In-1 Toilet Inlet Valve With Brass Connector For Side / Bottom Installation 2-in-1 toilet inlet valve J0701 is the most universal toilet fill valve in the range of toilet parts. It’s a common view based on following points: 1. Side or bottom installation direction. 2. Multiple inlet shanks choice: G3/8” brass, G3/8” plastic, G1/2” brass and G1/2” plastic. 3. Wide adjustment range to match toilet from high to low. 4. Compact structure to fit toilet cistern from big to small.

Side Fill Toilet Inlet Valve G1/2" And G3/8" For Side Entry Toilet Specifications: Material: POM, ABS Net weight: 190g +/-3% Delay fill: Optional Color: white, blue Inlet size: 3/8" BSP brass Useful shank length: 27mm Filling rate: 4.5L/min at 0.5 bar Float: Two piece design Re-fill tube: Optional Depth: 60mm Height: 226mm Working pressure: 0.02Mpa-1.6Mpa (2.9 psi - 232 psi) Noise level:

White Side Entry Fill Valve Replacement Kit With Transformable Inlet Shanks G3/8" Protect water hygiene: Many customers choose to use fill valve replacement kit J0701 with brass inlet shanks for stronger connection and avoid breaking in installation. Our inlet shank structure is brass tube with plastic inner to separate the brass and water, i.e., the water won't contact with the brass directly. The benefit is to avoid rusty brass contaminate the water supply. This structure

Water Tank Side Entry Fill Valve Assembly For Toilet Cistern Fill Valve Replacement Features: Endurable molded from premium raw material. Universal fill valve for side / bottom entry cisterns. Innovative delay fill design. Wide adjustment range to fit most toilet tank. Consistent quiet flow. Piece by piece inspection before shipment. Float adjustment by every 5mm. Instant close after water reaches working level. Anti syphon prevents back flow and contamination of water supply

ABS Dual Inlet Shanks Toilet Fill Valve Kit For Bottom / Side Fill Toilet Quiet to refill: As a new toilet fill valve, J0701 is not only a two way toilet fill valve kit, but also a quiet inlet valve. The noise level is 10 dB lower than requirement of industry standard. Many old toilets trouble the end user with big noise under working. That is really annoying especially at late night. Our quiet fill valve is a good solution. Just replace the old inlet valve with our new

G1/2" Or G3/8" Side Entry Cistern Inlet Valve With Changeable Inlet Shank Features: Universal transformable fill valve with inlet G3/8" or G1/2". Water saving delay fill design. Working pressure range 0.2bar - 20bar. Easy twist water level adjustment with a range of over 50mm. Leakage free, long endurance. Easy access for maintenance. Suitable for plastic and ceramic toilet cisterns. 100% responsible for quality. Specifications: Material: ABS, POM, rubber Net weight: 225g +/

Toilet Tank WC Fill Valve With Side Bottom Entry For Toilet System Repair Universal fill valve for side / bottom fill toilets. Operating pressure 0.2bar - 20bar. Innovative delay fill design. Easy twist float adjustment with a range of over 50mm. Wide water level adjustment range. Speedy refilling flow. Steady refilling, no splash. Silent filling, acoustic comfort. Piece by piece test before shipment. Specifications: Material: ABS, POM, rubber Net weight: 225g +/-3% Color:

Float Operated Side Entry Cistern Fill Valve G1/2" For Toilet Fill Valve Replacement Brief information: Float operated side entry fill valve J0401 is available with inlet shanks G1/2" plastic, G1/2" brass, G3/8" plastic and G3/8" brass. The standard useful shank length reaches 27mm which is enough for plumbing connection. For brass screw, the useful shank length could be customized to meet special needs. About the water level adjustment, we have two length rods for optio

Adjustable Anti Siphon Side Entry Fill Valve 3/8" BSP For Toilet Cistern Features: Endurable molded from ABS plastic raw material. Two adjustment rods match high and low water level. Water saving delay fill option. Speedy refilling flow. Instant shut off after water reaches working level. Anti-siphon structure, no back flow. With internal filter to screen out dirt. 100% tested before shipment. Applicable for ceramic and plastic toilet cisterns. Specifications: Material: POM,

Side Entry Fill Valve With Transformable Inlet Shanks G3/8" Brass Universal fill valve with transformable inlet shank G3/8". Fill valve operating pressure 0.2bar - 20bar. Innovative delay fill design. Easy twist water level adjustment with a range of over 50mm. Wide water level adjustment range. Speedy refilling flow. Steady refilling, no splash. Silent filling, acoustic comfort. Piece by piece test before shipment. Specifications: Material: ABS, POM, rubber Net weight: 225g

Side Entry Inlet Valve With Different Water Level Adjustment Rods Endurable molded from high quality plastic raw material. Wide adjustment range to match cisterns from high to low. Water pipe could be cut per needs. Delay fill / time lapse option for saving water. Instant shut off after water reaches working level. Speedy refilling flow. Anti-siphon structure, no back flow. Silent filling, acoustic comfort. Optional refill tube. Applicable for ceramic and plastic toilet

2 In 1 Universal Toilet Fill Valve With Delay Fill Option For Toilet Repair This 2-in-1 universal fill valve could be fitted with inlet shanks of different size and material: G3/8” POM plastic, G3/8” brass, G1/2” POM plastic and G1/2” brass. It’s offers great flexibility for distributors and wholesalers as there’s no more necessary to stock many different kinds of toilet fill valves for DIY market. Now this universal model kills the problem and make the choice a simple one.

Dual Toilet Fill Valve With Moveable Inlet Shanks For DIY Market Universal transformable fill valve with 2 in 1 inlet shank G3/8". Innovative delay fill design. Fill valve operating pressure 0.2bar - 20bar. Easy twist water level adjustment with a range of over 50mm. Instant close after water reaches working level. Speedy refilling flow. Steady refilling, no splash. 100% responsible for quality. Specifications: Material: ABS, POM, rubber Net weight: 230g +/-3% Color: Grey,

Dual Toilet Fill Valve With Transformable Inlet Shanks For Toilet Repair The two way fill valve is an innovative design for toilet repair market. The inlet shank is in movable structure and could be equipped at side or bottom per requirements. It’s very convenient for end user as there’s no more get confused on different types of toilet fill valve. For a wholesaler or distributor, you can also benefit from the flexibility to reduce the stock. You only need to order the fill

Two Way Toilet Fill Valve With Inlet G1/2" , High Pressure Endurable Universal transformable fill valve with 2 in 1 inlet shank G3/8". Innovative delay fill design. Fill valve operating pressure 0.2bar - 20bar. Easy twist water level adjustment with a range of over 50mm. Steady refilling, no splash. Easy access for maintenance. Suitable for plastic and ceramic toilet cisterns. 100% responsible for quality. Specifications: Material: ABS, POM, rubber Net weight: 250g +/-3%

Duo Toilet Fill Valve With Two Way Entry Inlet Shank G3/8" For Toilet Repair Universal transformable fill valve with 2 in 1 inlet shank G3/8". Innovative delay fill design. Fill valve operating pressure 0.2bar - 20bar. Easy twist water level adjustment with a range of over 50mm. Adjustable telescopic pipe every 5mm. Silent filling, acoustic comfort. Instant close after water reaches working level. Anti-siphon structure, no back flow. No tools easy fit. 100% tested before