Footwear Testing Equipment

SL-L33 Shoe Insulation Testing Machine / Safety Shoes Sole Insulation Testing Machine / Sole Insulation Testing Machine Use This instrument is a testing machine for testing the thermal insulation properties of the whole shoe. After the sample shoes are placed on a hot plate of a specified temperature for a certain period of time, the temperature rise of the inner surface of the sole is checked. Standards compliant ISO-20344 Principle The sample shoes are placed in a

SL-L12 Steel Hook Fatigue Testing Machine Use Test the resistance of various footwear to the repeated alternating load under the specified conditions. Standards compliant ISO 18895-2006 Technical parameters Lower clamp: fixed, with hard steel plane, height 32mm ± 2mm Distance between upper clamp link and lower clamp: 70mm±2mm Rate: 4r/s Applied to the sample circulation force: 49N ± 2N Control fixture clamp clamping force: 4900N.mm±50 N.mm Counter: LCD display 0~99,999,999

SL-L02 Taber Abrasion Testing Equipment Use The wear resistance of the material is measured, and the wear resistance of the product is evaluated by an abrasion test, such as measuring mass loss, thickness loss, and light transmittance. Application object Products used in test planes, such as: suitcases, carpets, cardboard, clothing, glass, plastic coatings, porcelain Y bricks, metal coatings, paints, varnishes, decorative sheets, high-pressure sheets, plastics, textiles,

SL-L36 Shoe Material Heat Test Machine Product description Shoe Material Heat Resistance Tester is used to determine the ability of the shoe materials (upper, lining and sole material) to withstand the heat due to shoemaking operation such as embossing, crimping, toe, and seat flanging, hot blasting etc. Place the specimen in contact With a hot metal surface under a constant pressure for a short fixed period of time to assess visually if there is any damage to its surface.

SL-L35 Skates Durability Testing Machine Use This machine is a simulation of people wearing skates. After a certain test time, the wear resistance of the pulleys is checked to determine the goodness of the test samples, which provides a reliable basis for improving product quality. This machine drives the sprocket through the motor to drive the drum to rotate, and adjusts the rotation speed of the drum by adjusting the motor speed to achieve the test purpose. Technical

SL-L29 Midsole Fiberboard Bending Test Machine Use This machine is used to test the travel shoes such as leather shoes and casual shoes, walking shoes, and the tortuous quality of the midsole fiberboard. During the test, the test piece is continuously reciprocated to the left and right by 90 degrees until it breaks. To determine the resistance to the meandering index of the midsole as a comparison, the basis of the middle plate is selected, and the power-off memory function

SL-L23 Roller Skate Impact Testing Machine Use This machine uses the electromagnet to control the lifting and lowering of the hammer, and impacts the roller shoe shoe wheel or heel at a certain speed to verify the impact resistance of the roller skate. The machine has anti-secondary impact shock, only one impact on the roller skates In order to ensure the accuracy of the test, the electric method is free to rise and fall. Standards compliant EN14619 Technical Parameters

Water Vapour Permibiality And Absorbancy Tester Standards IUP 7; EN 13515; BS EN ISO 14268; IUP 15; EN 420, EN 20344, Satra TM 178, STM 9; STM 47; EN 13518; EN 12746 Application It is used to test the water absorption and hydrolysis adsorption of the insole and inner liner. The flexing process experienced by the insole of the shoe was tested during imitation walking. The utility model adopts the lever pressure application mode, the structure design is reasonable, the spare

ASTM-F1677 Portable Elbow Slip Tester Product information The instrument measures the static friction coefficient of the test piece and the ground based on the principle of the load level and the vertical component ratio. The tester is adjustable and can be used on the ground of various materials such as dry, wet, oil or stained to test the slip resistance of the sole and heel material. Test the dry static coefficient and slip resistance of the sole and heel material.

Shoes Vamp Flexing Tester Application This machine is used to test vamp flex test-resistance to creasing and cracking Product information To primarily intended to determine the propensity for materials to crack or be used to assess whether leathers are likely to produce salt spue. In particular the test simulates conditions in the vamp part of footwear during walking. The test can be conducted with either wet or dry specimens at room temperature or with dry specimens at sub

SATRA TM 230 Dynamic Footwear Water PenetrationTester Product introduction It is designed to determine the dynamic water resistance of all types of footwear. The water tank is filled with a specified volume of colored water. A specimen is put on the artificial foot and flexed at a given angle and speed, and inspected at intervals for water penetration. Technical parameter Test quantity 2 Sets Flexing Angle 25±2° Flexing Speed 60±6cpm Counter 0～999,999 Dimension(W×D×H) 85×70

Shoe Peeling Strength Tester Product description This machine is suitable for checking into a shoe sole and upper peel strength between, the principle is fitted shoe shoes will become clamped in the machine to peel knife to peel the sole and upper junction, when measured peel is the force required to peel strength, peel strength and the edge according to the width of the peel strength is calculated. Specifications Blade width 20 ± 0.2mm and 10 ± 0.2 mm Edge downlink speed 20

Safety Shoe Impact Tester Product information This machine, incorporating a steel striker adaptered to fall freely on vertical guides from a predetermined height to give the required impact energy to the toe of safety footwear for measuring the degree of the dent. In addition, the toecap should not develop any cracks on the test axis with go through the material. Purpose Evaluate the smash resistance of the toe cap of a safety or protective shoe. Test principle The impact

Sole Belt Flexing Tester/Shoes Sole Bending Test Machine Application Shoes Sole Bending Test Machine is used to determine the resistance of materials to cut growth, during repeated flexing. It’s especially applicable to outsoles of footwear including sole constructions. Use a cutting tool to piece the specimen between the cleats at three points along the line of maximum bending stress. By the specified speed and times of 90bending action to inspect the cuts growth with a

Shoes Waterproof Flexing Tester Shoes Waterproof Flexing Tester Product information It determines the water resistance and durability of flexing for shoe immersed in water it will stop automatically after the preset numbers or predetermined time are reached. It adopts the advanced sensor to detect and indicate even the water being permeated inside the footwear lightly to avoid the judging errors by naked eyes. Technical parameters Test Range Adult shoes Test Quantity 2 pieces

Light discoloration (UV) Tester To measure the resistance to UV light of soling and upper material Technical parameters The internal dimension of test chamber 50 x 50 x 60 cm Temperature control range normal temperature ~ 200. C Control mode automatic calculus controller Temperature display, 0.1. C. The control accuracy ± 3. C Distribution precision plus or minus 1% 1. C (at-100. C) Time memory 0-999 hours, blackouts, the memory type, including a buzzer Wheel speed Dia. 45 cm

Aging Machine To evaluate the surface visual changed after the test Technical parameter Temperature Range: Ambient +10°C to +300°C Temp. Accuracy: ±0.5°C Temp. Regularity: ±2°C at 200°C, ±3°C at 300°C Indication Resolution: 0.1°C Heating-up time: Approx. 40mins External Material: Stainless steel plate+poweder coated Internal Material: SUS#304 stainless steel plate Insulation: Fiberglass wool

Ross Flexing Tester Application Shoes Ross Flexing Tester is used for flexing test at a 90°angle of rubber products, sole materials, PU, etc. by subjecting specifically prepared specimens to repeated bend flexing. The damage and cracking condition is then observed. Principle The sample is repeatedly subjected to deflection at a certain angle and a certain degree of frequency to examine the degree of damage and cracking. Features 1. Be able to test 0~12pcs specimens; 2.

NBS Rubber Abrasion Tester The specimen under the specified load is abraded by the grinding paper stuck onto a rotating drum to check its abrasion consumption. Specifications Load 22N, 3sets Grinding Cloth 40#grit Counter LCD, 0~99,999,999 Dimension (W*D*H) 72×49×50 cm Weight 104KG Power 1∮, AC220V, 3 A Set rotation 84 rotate (about 40M) Return form Electric automatic reset Drive Power 40W; 1 / 30 Power 220V 50Hz Machine Dimensions 600 330 420 (mm) Machine Weight 75kg

CE Footwear Testing Equipment , ASTM D7854 Coated Fabric De Mattia Flex Tester Applications De Mattia Flexing Tester is used for the assessment of the resistance of coated fabrics to damage by repeated flexing under De Mattia method. The tester is suitable for coated fabric against repeated flexing damage performance, to provide a reference for improving the fabric. Standards BS 3424 P9, ISO 7854 Principle Fold a strip of coated fabric two times with their long edges stacked