Toys Testing Equipment

EN71-8 Toys Testing Equipment V-shaped Template for Assessment of Head and Neck Entrapment Description This template is used for assessing partially bound and V-shaped openings for head and neck entrapment It is used to test the evaluation of template to head and neck sick into parts of closed V type open. Material Alu.alloy Size tolerances +/-1mm Angle tolerances +/- 1degree Procedure Position the “B” portion of the test template between and perpendicular to the boundaries

ISO8124-4 Toys Testing Equipment Test template D for Assessment of Head and Neck Entrapment This template is used for assessing partially bound and V-shaped openings for head and neck entrapment It is used to test the evaluation of template to head and neck sick into parts of closed V type open. Material Alu.alloy Size tolerances +/-1mm Angle tolerances +/- 1degree Procedure Position the “B” portion of the test template between and perpendicular to the boundaries of the

IS 9873/ISO8124-4 ToysTesting Equipment Toggle Test Device Description A toggle test device is moved along the direction of a forced movement in order to establish whether there is a potential entrapment hazard. A Toggle Test Device consists of toggle, chain,collar and pole. Toggle is made of polyamides (PA) (e.g. nylon) or polytetrafluroethylene (PTFE), which have been found to be suitable materials; Chain,collar,Pole. Techinal Parameters Weight 2.96kg Chain diameter 3.6+/-0

Motor Horizontal Brake Performance Tester Product information Motor brake performance – Horizontal test Load the toy as in 8.21 (static strength). Measure the force required to pull the toy on a horizontal plane covered with a surface of abrasive paper (aluminium oxide P60) at a constant speed of (2 ± 0,2) m/s. Applications This Brake Performance Tester is mainly used to test the motor brake performance of electric ride-on toys. Standards EN 71-1 Principle Load the toy a

Kinetic Energy Tester Toys Testing Equipment Sensor Distance Select 10/30cm Product introduction KE Tester is a equipment to check the speed of a object (DUT) which pass though the test tunnel .According to the result read out and mass value of DUT, we could calculate the kinetics energy value and know how danger of DUT it is . Inside the test tunnel of this KE tester, there have three sets of Infra-Red sensor group. One set for start the timer and other two for stop the

EN71-1 Direct current field Gauss meter with a resolution of 5 G Large and easy-to-read display. The alternate magnetic flux density, in addition to direct magnetic flux density, can be measured.(50/60 Hz) A wide measuring range from (0.1Gs-3000Gs)/(1Gs-30KG) (Direct current) The high resolution measuring mode ensures more accurate measurement. (Resolution 0.01 mT =0.1 G) The unit of display can be changed over between “mT ”and “G ”. High dustproof by use of sheet keys. The

Toys Testing Equipment EN71-1 YoYo Ball Tester Summary This tester was designed according to standard EN71. It is used for measuring the length of Yo Yo ball. Key Parameter Mass:0.05kg/0.1kg/0.2kg Scale Length:1500mm Dimension:50x50x175cm Weight:16kg Operation procedure Attached the tether of the Yo Yo Ball to the top clamp. Make the pointer aim at the end of the tether Apply a mass to the ring at the end of the tether Position the tether vertically Make the pointer aim at

Kinetic Energy Tester with Sensor Distance 10-30cm Product Introduction Kinetic Energy Tester is a equipment to check the speed of a object (DUT) which pass though the test tunnel .According to the result read out and mass value of DUT, we could calculate the kinetics energy value and know how danger of DUT it is . Inside the test tunnel of this KE tester, there have three sets of Infra-Red sensor group. One set for start the timer and other two for stop the timer. Each group

GB/T48577 Inclined Impact Test Bench Application The inclined surface impact test bench simulates the ability of product packaging to resist impact damage in the actual environment. Such as handling, stacking of shelves, sliding of motors, loading and unloading of locomotives, transportation of products, etc. This machine can also be used as scientific research institutions, universities, colleges, packaging technology testing centers, packaging material manufacturers, and

Kinetic Energy Tester Toys Testing Equipment Sensor distance select 100-500mm Kinetic Energy Tester 10-50CM.pdf Product introduction KE Tester is a equipment to check the speed of a object (DUT) which pass though the test tunnel .According to the result read out and mass value of DUT, we could calculate the kinetics energy value and know how danger of DUT it is . Inside the test tunnel of this KE tester, there have three sets of Infra-Red sensor group. One set for start the

Toys Scooter Steering Tubes Strength Tester Applications Toys Scooter Steering Tubes Strength Tester apply to test the strength of toy scooter steering tubes,including resistance to downward forces and resistance to upward forces. This tester is suitable for the test of the strength of the toy scooter. In the normal use of the toy scooter, the vertical tube is fixed vertically on the machine platform, and the strength performance after 5 minutes of vertical load is applied by

ASTM F963 Magnet Cycling Tester for Clamping Testing Toy Magnetic Product information 25W AC motor with speed control Output speed 2rpm with protect cover metal Clamp for Clamping testing toy magnetic Metal Clamp can adjust the angle and the height Control box Includes speed controller Power on Lamp includes two clamps,clamp 1 ,clamp 2 and removable clamp 2, total 3 clamps Test methods New magnet test method (ASTM F963-08) Magnet use and abuse testing Each component is tested

Kinetic Energy Tester Toys Testing Equipment Sensor distance select 100-500mm Kinetic Energy Tester 10-50CM.pdf Product introduction KE Tester is a equipment to check the speed of a object (DUT) which pass though the test tunnel .According to the result read out and mass value of DUT, we could calculate the kinetics energy value and know how danger of DUT it is . Inside the test tunnel of this KE tester, there have three sets of Infra-Red sensor group. One set for start the

Torque Fixture Large It is used for clamping the samples during the torque testing. Testing Standards EN71-1, ISO8124-1,ASTM Note 1.Independent carton packaging 2.In Stock

Kinetic Energy Tester Toys Testing Equipment UseThis device comes with a printer.The instrument is mainly used to test the kinetic energy of the projectile toy, so that the ejection component of the toy passes the test tube of the instrument or the two sensors of the external test component, and the time taken by the toy ejection component to pass a certain distance is measured, and the movement is calculated. energy. Inspect the safety performance of the catapult toy for

Toys Scooter Steering Tubes Strength Tester Applications Toys Scooter Steering Tubes Strength Tester apply to test the strength of toy scooter steering tubes,including resistance to downward forces and resistance to upward forces. This tester is suitable for the test of the strength of the toy scooter. In the normal use of the toy scooter, the vertical tube is fixed vertically on the machine platform, and the strength performance after 5 minutes of vertical load is applied by

SL-S35 Noise Meter Application SL-S35 noise meter is suitable for detecting near-ear toys, rattle toys, squeeze toys, gunpowder cap toys, other hand-held toys, stationary or self-driven desktop and ground toys, dragging toys, hand-starting clockwork toys and hands The sound of a rocking toy is loud to prevent excessive sound from damaging the child's hearing. Standard test IEC651 TYPE2, ANSI S1.4 TYPE2. Technical parameters Frequency weighting characteristics A (simulated

SL-S42 50Kg Static Strength Weight Use Load for determination of strength and stability. Load the toy with a mass of (50 ± 0,5) kg. Load the toy in the most onerous position with a mass of (50 ± 0,5) kg on its standing or sitting surface for 5 min Standard test ASTM 963, EN71. Parameter The approximate diameter of the base of the load shall be 150 mm Weight 50 ± 0.5 kg (110.2 ± 1.lb) Diameter 150 +10/-0 mm (5.9 +0.4/-0 in.) Height 300 +10/-0 mm (11.8 +0.4/-0 in.)

25KG Static Strength Weight Use Load for determination of strength and stability. Load the toy with a mass of (25 ± 0,2) kg. For toys labelled as not suitable for children of 36 months and over, load the toy with a mass of (25 ± 0,2) kg. Standard test ASTM 963, EN71. Parameter Weight 25 ± 0.2 kg Diameter/ Center 150 +10/-0 mm (5.9 +0.4/-0 in.) Height 300 +10/-0 mm (11.8 +0.4/-0 in.)

ISO 8124-1 Toys Test Equipment Toy Kinetic Energy Tester Product information The Kinetic Energy Tester is suitable for kinetic energy testing of projectiles, energy storage ejection toys, and non-energy storage ejection toys, such as toy guns and crossbows. Principle: Let the ejection part of the toy pass the test tube of the instrument or pass through the two sensors of the external test part, measure the time it takes the toy ejection part to pass a certain distance, and