SMD Power Inductor

MDR43SG1R0MC / MDR43SG1R5MC 1.0 to 6.8uH SMD choke for Camcorders Feature: RoHS compliant Small size: 5.8x5.2x3.2mm Operating temperature rang: -40℃~85℃ Storage termperature rang: -40℃ ~ 125℃ Pin finish : Hot dipped tin Packing: 2000pcs per reel Part number Inductance (uH) Tolerance (±%) DCR MAX (Ω) Isat (A) Irms (A) MDR43SG1R0MC 1.0 20 0.03 4.0 4.0 MDR43SG1R5MC 1.5 20 0.04 3.5 3.5 MDR43SG2R2MC 2.2 20 0.06 2.6 2.6 MDR43SG3R3MC 3.3 20 0.07 2.0 2.0 MDR43SG4R7MC 4.7 20 0.08 1.9

MDR43SG100MC Power inductor for protable communication equipments Part number Inductance (uH) Tolerance (±%) DCR MAX (Ω) Isat (A) Irms (A) MDR43SG100MC 10 20 0.19 1.3 1.1 MDR43SG150MC 15 20 0.25 1.0 1.0 MDR43SG220MC 22 20 0.35 0.86 0.8 MDR43SG330MC 33 20 0.60 0.72 0.7 MDR43SG470MC 47 20 0.80 0.63 0.6 MDR43SG680MC 68 20 1.0 0.52 0.5 MDR43SG101MC 100 20 1.2 0.43 0.4 MDR43SG151MC 150 20 2 0.35 0.3 MDR43SG221MC 220 20 3 0.29 0.25 MDR43SG331MC 330 20 4 0.22 0.14 MDR43SG471MC 470

MOX-HCSM-104 Surface Mount High Power Inductors 0.36uH to 13.5uH Features: High frequency design. Operating temperature: -40°C to +125°C. Flat wire construction. Excellent thermal stability. MoxiE Inductor Corporation custom designs available inductance test: HP4284A @ 100kHz/1V or equivalent. OCL: Open Circuit Inductance test parameters:100kHz, 0.1Vrms, 0.0Adc. OCL@-40°C can be lower than OCL@20°C by 15% max. Isat¹ Amperes Peak for approximately 30% rolloff (@25°C) Irms² DC

MOX-HCP-8878-R68M Flat Wire Inductor Allows Low DC Resistance Description: Measurement frequency for Inductance : 100KHz/1.0V. DCR measured on 502BC ohm-meter. The saturation current : Value of inductance decrease within 30%. Temperature rise current : A rise in temperature of core surface is 40°C. Magnetically shielded construction. Flat wire winding allows low DC resistance. Operating temperature: -40°C to +125°C. Storage temperature: -40°C to +85°C. Packaging: Tape & reel

MOX-HCP-6630-R18M Flat Wire High Current Inductors for Smart Water Meters Description: PART NUMBER INDUCTANCE TOLERANCE DCR(mΩ) NOM / MAX ISAT (A) DROP ≤30% IRMS (A) RISE≤40°C MOX-HCP-6630-R18M 0.18 ±20% 1.32 / 1.40 39.00 32.50 MOX-HCP-6630-R33M 0.33 ±20% 2.05 / 2.25 30.00 25.25 MOX-HCP-6630-R56M 0.56 ±20% 2.85 / 3.15 29.00 22.00 MOX-HCP-6630-1R2M 1.20 ±20% 6.35 / 7.02 22.00 16.50 MOX-HCP-6630-1R8M 1.80 ±20% 9.78 / 10.75 18.20 14.50 MOX-HCP-6630-2R2M 2.20 ±20% 10.45 / 11.50

MOX-HCP-1610-4R7M Flat wire winding SMD Power Inductor for Heat Meters Description: Measurement frequency for Inductance : 100KHz/1.0V. DCR measured on 502BC ohm-meter. The saturation current : Value of inductance decrease within 30%. Temperature rise current : A rise in temperature of core surface is 40°C. Magnetically shielded construction. Flat wire winding allows low DC resistance. Operating temperature: -40°C to +125°C. Storage temperature: -40°C to +85°C. Packaging:

10μH to 22mH PCB mounting hole Bobbin Type Inductors 1415517C Description: Inductance, (1kHz, 0.1VAC) DC Current DC Resistance Q at f kHz Q at f kHz SRF Mechanical Dimensions Mechanical Dimensions Mechanical Dimensions Mechanical Dimensions Mechanical Dimensions Footprint Footprint ±10% Max. Max. Nom. Nom. Nom. a b c d Øe f Øg Part No. μH A Ω Q f MHz mm mm mm mm mm mm mm 1415517C 1.5mH 1.7 0.374 28 50 0.7 31.3 29.8 14.0 0.75 5.1 23.1 1.5 1422509C 2.2mH 0.9 1.000 43 50 0.9 25

10uH to 22mH power inductor 1430430C for general purpose filtering applications FEATURES: RoHS compliant Radial format -40°C to 85°C operating temperature Up to 13A IDC 10μH to 22mH Low DC resistance Fully tinned leads PCB mounting hole Low temperature dependence Backward compatible with Sn/Pb soldering systems Custom parts available Description: Inductance, (1kHz, 0.1VAC) DC Current DC Resistance Q at f kHz Q at f kHz SRF Mechanical Dimensions Mechanical Dimensions

Radial format 1410313C Through hole Bobbin Type Inductors for power supply Description: Inductance, (1kHz, 0.1VAC) DC Current DC Resistance Q at f kHz Q at f kHz SRF Mechanical Dimensions Mechanical Dimensions Mechanical Dimensions Mechanical Dimensions Mechanical Dimensions Footprint Footprint ±10% Max. Max. Nom. Nom. Nom. a b c d Øe f Øg Part No. μH A Ω Q f MHz mm mm mm mm mm mm mm 1410313C 10 ±15% 13 0.009 54 50 20.7 27.0 24.4 14.0 1.30 5.5 23.9 2.6 1415312C 15 ±15% 12 0

84473C electronic components SMD Power Inductor for LED driver Description: Properties Test conditions Value Unit Tol. Inductance 10 KHz/ 100 mV L 10 μH ±20% Rated Current ΔT = 40 K IR 1.45 A max. Saturation Current |ΔL/L| < 10% Isat 1.74 A typ. DC Resistance @ 20°C RDC 0.182 Ω max. DC Resistance @ 20°C RDC 0.118 Ω typ. Self Resonant Freq. @ 20°C fres 30 MHz typ. Rated Voltage @ 20°C UR 80 VDC max. E General information: It is recommended that the temperature of the part does

SMD Power Inductor 1µH Unshielded Wirewound Inductor 4A Description : Type Wirewound Material - Core Ferrite Inductance 1µH Tolerance ±20% Current Rating (Amps) 4A Current - Saturation 5.72A Shielding Unshielded DC Resistance (DCR) 49 mOhm Max Q @ Freq - Frequency - Self Resonant 110MHz Ratings AEC-Q200 Operating Temperature -40°C ~ 125°C Inductance Frequency - Test 10kHz Mounting Type Surface Mount Package / Case Nonstandard Supplier Device Package 4532 Size / Dimension 0

1273AS-H-1R5N=P3 / 1248AS-H-1R5N=P3 power inductor for large currents Description: • 8.3× 8.3mm Max. square, 3.0, 4.0, and 4.5mm Max. height. • Magnetically shielded construction and low DC resistance. • Suitable for large currents. • RoHS compliant. • Halogen Free Part Number Inductance (μH) Tolerance (%) DC Resistance (mΩ) Max. (Typ.) Inductance Decrease Current(3) (A) Max. (Typ.) =30% Temperature Rise Current(3) ΔT=40°C (A) Max. (Typ.) 1273AS-H-1R5N=P3 1.5 ±30 10.0 (8.3) 7

1274AS-H-1R5N=P3 Ferrite Inductors Low DC resistance for using flat wire Description: 10.3 x 10.3mm Max. square, 5.0mm Max. height. Magnetically shielded construction, low magnetic flux leakage from top of coil Low DC resistance for using flat wire Suitable for large currents. Operating temperature (− 40～+85°C) nductance Tolerance DC Resistance Inductance Decrease Current (A) Max. (Typ.) Temperature Rise Current(3) T=40 C Part Number (uH) (%) (m ohms)Max.(Typ.) L/L=10% L/L=30

Compact size low profile SMD Power Inductor 28102C for switching power supply Description: Inductance (10kHz, 100mVAC) Inductance Range (10kHz, 100mVAC) DC Current2 DC Resistance Q@f MHz Q@f MHz SRF Nom. Min.-Max. Max. Max. Nom. Nom. Typical Part No. μH μH A mΩ Q F MHz 28102C 1.0 0.68 - 1.02 15.5 2.6 45.6 1.0 104 28152C 1.5 1.12 - 1.68 12.5 3.6 43.9 1.0 72 28222C 2.2 1.56 - 2.34 11.2 4.4 36.9 1.0 58 28332C 3.3 2.84 - 4.26 9.3 7.5 34.6 1.0 42 28472C 4.7 3.68 - 5.52 8.3 10 33.3

29102C Low profile bobbin-wound shielded inductors for computers Description: FEATURES RoHS compliant Low profile Surface mount Inductance range from 1.0μH to 1.0mH Tape & reel UL 94V-0 materials J-STD-020D.1 reflow Inductance (10kHz, 0.1VAC) Inductance (10kHz, 0.1VAC) Idc2 Rdc Nom. Min. – Max. Max. Max. Part No. μH μH A mΩ 29102C 1.0 0.70 – 1.30 6.0 16 29152C 1.5 1.05 – 1.95 5.5 18 29222C 2.2 1.54 – 2.86 5.0 20 29332C 3.3 2.31 – 4.29 4.0 28 29472C 4.7 3.29 – 6.11 2

29102C Low profile bobbin-wound shielded inductors for computers Description: The 2900L series is a lower profile version of our 2900 series range of bobbin-wound, shielded inductors. They are suitable for power-line filtering found in consumer electronics such as desktop computers, handheld devices and GPS systems, as well as in a vast range of industrial and telecom applications including network hubs, bridges & routers, and high frequency wireless communication devices.

83421C power inductors for power applications with restricted PCB space and height Description: RoHS compliant Up to 3A IDC 0.42μH to 100μH Low RDC Small footprint Ultra-low profi le UL 94V-0 packaging materials J-STD-020D refl ow Custom inductance values available Inductance DC Current Saturation Current DC Resistance ±20% Max. Typ. Max. Part no μH A A mΩ 83421C 0.42 3.00 5.69 24 83751C 0.75 2.70 4.55 30 83122C 1.2 1.70 3.36 65 83172C 1.7 1.55 2.71 73 83232C 2.3 1.40 2.35 86

2.0*0.9*1,6mm Winding type (ferrite core) SMD Power Inductor LQH2MCN1R0M02 Description: Part No. Inductance Inductance value test frequency Rated current DC Resistance S.R.F.*(min) LQH2MCN1R0M02 1.0μH±20% 1MHz 485mA 0.30Ω±30% 100MHz LQH2MCN1R5M02 1.5μH±20% 1MHz 445mA 0.40Ω±30% 95MHz LQH2MCN2R2M02 2.2μH±20% 1MHz 425mA 0.48Ω±30% 70MHz LQH2MCN3R3M02 3.3μH±20% 1MHz 375mA 0.60Ω±30% 65MHz LQH2MCN4R7M02 4.7μH±20% 1MHz 300mA 0.8Ω±30% 60MHz LQH2MCN5R6M02 5.6μH±20% 1MHz 280mA 0.9Ω±30%

0.47uH to 22uH LQH2HPN_JR serier Fixed inductor with Wirewound type Description: Part number LQH2HPN_JR series Description FIXED IND 1.5UH 1.08A 90 MOHM Product Training Modules Power inductors Part Status Active Type Wirewound Material - Core Ferrite Inductance 0.47µH to 22uH Tolerance ±30% Shielding Shielded DC Resistance (DCR) 90 mOhm Max Frequency - Self Resonant 95MHz Operating Temperature -40°C ~ 105°C Inductance Frequency - Test 1MHz Mounting Type Surface Mount Package

MOX-UPI-0402 SERIES Wirewound Inductor for notebook computers Description: UPI-0402 surface mount power inductors are engineered for the stringent high current requirements of step up and step down transformers, notebook computers and various other handheld devices. We offers a unique industrial design to meet the most robust applications. The MOX-UPI-0402 is available in a wide range of inductance values to meet your design requirements. Features: RoHS compliant. High