SMD Power Inductor

4.5*2*2mm 885362210017 Ceramic Capacitors For PCB Application Description: Ceramic capacitors are also known as ceramic capacitors or monolithic capacitors. As the name suggests, ceramic capacitors are capacitors whose dielectric material is ceramic. Depending on the ceramic material, this capacitor can be divided into low-frequency ceramic capacitors with a capacity of 1 to 300 pF and high-frequency ceramic capacitors with a capacity of 300 to 22 000 pF. Classified according

7850 size SMD Power Inductor for car audio Description: High Current SMD Inductor Coil power Inductor RoHS High Current Electrical SMD Shield Power Inductor Shielded SMD Coupled Inductor /High Quality SMD/Chip Wirewound Power Inductor SMD Power Inductors Surface Mount Shielded coil Chip Wirewound Power Inductor Similar Product: 784787012 784787027 784787039 784787047 784787068 784787082 784787100 784787101 784787120 784787121 784787150 784787151 784787180 784787181 784787220

winding wire electromagnets coil SMD Power Inductor Description: Size:4.0*4.5*3.2mm Type:Winding wire SMD Power Inductor SMD Power Inductor Choke Coils Alternative to TDK/Samami/Sumida/TOKO Series smd ferrite shield inductor coil Shielded SMD Coupled Inductor Multilayer Chip SMD Power Inductor hight frequency SMD Shielded power inductor 100uh 0.26A smd power inductor 100uh smd power inductor SMD/SMT power inductor 330UH,1.8A Similar Product: 784773118 784773122 784773127

Non-shielded winding wire power inductor coil with RoHS Description: winding wire power inductor coil smd coil / ferrite shield inductor coil SMD power inductor Choke coil smd shielded power inductor Unshielded SMD choke coil filter Power Inductor Profile Feature Pb-Free Assembly Sn-Pb Assembly Preheat - Temperature Min (Tsmin) - Temperature Max (Tsmax) - Time (ts) from (Tsmin to Tsmax) 150°C 200°C 60-120 seconds 100°C 150°C 60-120 seconds Ramp-up rate (TL to TP) 3°C/ second

SMD power inductor reduces core loss and store energy Description: Impedance : 70Ω Maximum Impedance: 140Ω Rated Current : 1000mA DC Resistance : 0.09Ω Type: High Current Ambient temperature : -55°C up to +85°C/105°C Operating temperature : -55°C up to +125°C Storage temperature : -20°C up to +60°C Size : 0402 Length:1.0mm Width:0.5mm Height: 1.5mm or 2.2mm Application: Reduces core loss and store energy Classification Wave Soldering Profile: Profile Feature PB-Free Assembly

0402 size Magnetic beads SMD Power Inductor Description: An inductor, also called a coil, choke or reactor, is a passive two-terminal electrical component that stores energy in a magnetic field when electric current flows through it.[1] An inductor typically consists of an insulated wire wound into a coil around a core. Classification Reflow Soldering Profile: Profile Feature Value Preheat Temperature Min Ts min 150°C Preheat Temperature Max Ts max 200°C Preheat Tlme ts from

782422102 0402 High Current Ferrite Bead Multilayer Chip Beads Motherboard Inductor Description: Crystal filter, a filter composed of crystal resonators. Compared with LC resonance circuit of the filter, crystal filter in the frequency selectivity, frequency stability, intermediate gradient and insertion loss is much more superior, has been widely used in communications, navigation, measurement and other electronic devices. Single chip crystal filter adopts integrated

SMD Power Inductor for Noise removal for mobile devices Description: For large current / low DCR impedance range low resistance and high energy storge. Nickel barrier terminations provide excellent solder heat resistance Suitable for flow and reflow soldering Application: High current DC power lines for USB interface circuitry,personal computers, electronic games, hard disk drives, and other general electronic equipment Impedance 330 Ω Maximum Impedance 640 Ω Rated Current

782422331 High frequency magnetic SMD ferrite/ceramic multilayer chip beads Inductor Integrated crystal filter: There are three types of crystal filters made by integrated circuit technology: single chip, serial single chip and multiple chip. Series monolithic crystal filters are composed of several capacitance-coupled monolithic crystal filters. Its advantage is to adjust the operating frequency and inhibit parasitic frequency. The multi-chip crystal filter consists of a

4.5*4.0*3.2mm 10uH 78477310 Unshielded Choke coil SMD Power Inductor Description: The power inductor is divided into two kinds: magnetic cover and non-magnetic cover, which are mainly composed of magnetic core and copper wire. It mainly ACTS as filter and oscillation in the circuit. (1) flow resistance: the self-induced electromotive force in the coil is always opposed to the current change in the coil. It can be divided into high frequency choke coil and low frequency choke

SMD Power Inductor smd emi suppression ferrite bead Description: The common mode inductor (Common mode Choke), also known as the common mode choke, is a symmetrical coil that turns the same direction in the closed loop. The ideal common mode choke has an inhibitory effect on the common mode interference between L (or N) and E, but the differential mode interference between L and N has no inductance suppression. However, the incomplete symmetry of the actual winding will lead

Magnetically shielded construction SMD Power Inductor MOXIE HCP-1188 SERIES Description: nductors,small transformer made with soft ferrite core, include NiZn, MnZn, Amorphous, Iron powder metal core for winding, tinned, guled,content toroidal inductor, rod inductor, drum inductor,smd chip inductor coil,widely used in many PCB boards, for filers, EMI/EMC, Anti-noise,Amplifier,RF transformer,..... Application: Led light driver, GPS,Computer,Audio/video components, Electric PCB

MOX-DAI-1310 SERIES large current SMD Power Inductor For Led light driver Description: Operating temperature: -40°C to +85°C. Storage temperature: -40°C to +85°C. Measurement Frequency for Inductance : 1kHz/1.0V DCR Measured on a 502BC ohm-meter Saturation current : Value of inductance decrease within 20% Temperature rise current : A rise in temperature of core surface is within 40°C. RoHS Compliant. Packaging: Tape & reel. Tolerances unless otherwise specified: 0~10=±0.15,

MOX-DAI-0910 SERIES Saturation current SMD chip Power Inductor Description: Operating temperature: -40°C to +85°C. Storage temperature: -40°C to +85°C. Measurement Frequency for Inductance : 1kHz/1.0V DCR Measured on a 502BC ohm-meter Saturation current : Value of inductance decrease within 20% Temperature rise current : A rise in temperature of core surface is within 40°C. RoHS Compliant. Packaging: Tape & reel. Tolerances unless otherwise specified: 0~10=±0.15, 10~20=±0.20,

0.10 to 10.00 uH SMD Power Inductor MOX-SPI-5050E Series for notebook PC Description: LAN Transformer and Filter Modules for Network Filter and Isolated Transformer . Designed to meet IEEE802.3 requirements. LAN (pulse XFMR filter), LAN-Mater (RJ-45 + XFMR/LED) Common mode chokes, VoIP XFMR, ISDN, T1, CEPT, XFMR ADSL line XFMR, VDSL XFMR/filter Micro filter splitter (CO/CPE side) POE (Power Over Ethernet) drivers 10/100 base, 1000 Base-TX network filter modules T1/E1 SMD and

High current iron powdered core SMD Power Inductor MOX-SPI-5050F Description: Low cost. High current iron powdered core. Low profile package design. Industrial operating temperature: -55°C to +125°C. Shielded construction. Tape & Reel packaging available. (500 pieces per reel) RoHS compliant. Part Number Initial Inductance (μH) Idc = 0A Tolerance (%) Test Frequency Irms (A) Maximum Isat (A) Maximum RDC (Ω) Typical RDC (Ω) Maximum MOX-SPI-5050F-R10M 0.10 20% 100KHZ, 0.1V 60.0

13.6*12.9*3.5mm MOX-SPI-5050L Series SMD Power Inductor for DC DC converters Description: High Current Low Profile Surface Mount Power Inductors Low cost. High current iron powdered core. Low profile package design. Industrial operating temperature: -55°C to +125°C. Shielded construction. Tape & Reel packaging available. (500 pieces per reel) RoHS compliant.. Part Number Initial Inductance (μH) Idc = 0A Tolerance (%) Test Frequency Irms (A) Maximum Isat (A) Maximum RDC (Ω)

6.2*6.2*3.0mm High current rating SMD Power Inductor MOX-SPI-0602 series Description: SPI-0602 series of surface mount shielded power inductors are widely used in PDA’s, notebooks, LCD televisions and digital cameras. MoxiE offers a ultra low profile magnetically shielded package that offer high inductance & high power. Features: • Low cost. • Operating temperature: -40°C to +85°C. • High current rating. • RoHS compliant. • Magnetically shielded applications. • Measuring

MOX-SPIL-0402 shielded power inductors for LCD televisions and digital cameras Description: SPIL-0402 series of surface mount shielded power inductors are widely used in PDA’s, notebooks, LCD televisions and digital cameras. Features : • Low cost. • Flat top for pick & place machines. • Available Tolerances: ±10% & ±20%. • RoHS compliant. • Magnetically shielded applications. Part Number Inductance (μH) Tolerance (%) DCR (Ω) Maximum Irms Max. (A) L Test Frequency MOX-SPIL

High inductance high current MOX-SPI-1205PM series SMD Power Inductor Description: MOX-SPI-1205PM series are designed to be used as single, coupled or (1:1) transformer applications. Engineered to provide high inductance, high current handling and high efficiency. Features: Low cost. RoHS compliant. Parallel connection mode. Perfect for DC-DC converters and VRM/VDC controllers. High inductance, high current industrial design. Part Number Inductance (μH) Inductance @ 0Adc (μH