Tool Steel Bar

Micro-deformation of Wear-resistant Tool Steel Bar 1.2510 / SKS3 / O1 1. Availability and hardness Soft annealed, hardness ≤ 230HBS. 2. Typical chemical composition (mass fraction,%) C Si Mn Cr W P S V 0.90-1.05 0.15-0.35 1.00-1.20 0.50-0.70 0.50-0.70 ≤0.035 ≤0.035 0.05-0.15 3. 1.2510 tool steel's characteristics: German micro-deformation of wear-resistant steel, the steel is manganese, chromium, tungsten alloy steel, high-quality non-deformation cold work tool steel. The

P20/ 1.2311/ 3Cr2Mo Plastic Mold Steel Prehardening QT Round Bar P20 mould steel is a common alloy tool steel which usually supplied in QT condition. The 1.2311 steel can give an excellent polished finish. DIN 40CrMnMo7 tool steel is one of the most widely used material for machine cut plastic moulds. This grade also provides excellent wear resistance. Physical Properties of 1.2311, P20, 3Cr2Mo special steel Density: 0.284 lb/in3 (7861 kg/m3) Specific Gravity: 7.86 Modulus of

Hot Rolled P20/ 1.2311/ 3Cr2Mo Rrehardening Steel Round Bar of Plastic Mold Steel Equivalent Grades GB DIN AISI JIS 3Cr2Mo 1.2311 P20 PDS-3 1, Features a, Good hardness uniformity and polishing property,good machining properties. b, Good integral machanical performance when under high temperature, high Corrosion resistance c, Good heat-resistance and fatigue-resistance,very high mechanical behavior,cutting mechanical property. d, Pre-hardened to HRC28-32, can be directly used

Prehardening 1.2311, P20, 3Cr2Mo Plastic Mold Steel for Injection Mould Prehardening 1.2311 P20 3Cr2Mo tooling steel is a common alloy tool steel which usually supplied in QT condition. The 1.2311 P20 P20 3Cr2Mo can give an excellent polished finish.Forging prehardening tempering 1.2311 P20 P20 3Cr2Mo tool steel is one of the most widely used material for machine cut plastic moulds. This grade also provides excellent wear resistance. Mechanical Properties Properties Metric

Good Performance 1.2311/ P20 Hot Rolled Plastic Mold Steel Plate and Round Bar 3Cr2Mo, 1.2311, P20 mould steel Mechanical Properties Properties Metric Hardness, Brinell (typical) 300 Hardness, Rockwell C (typical) 30 Tensile strength, ultimate 965-1030 MPa Tensile strength, yield 827-862 MPa Elongation at break (in 50 mm (2″)) 20.00% Compressive strength 862 MPa Charpy impact (V-Notch) 27.1-33.9 J Poisson’s ratio 0.27-0.30 Elastic modulus 190-210 GPa 1, Features a, Good