Hot Rolled Steel Bar

Good Corrosion Resistance Hot Rolled Stainless Steel Bar 1.2083 ► Equivalent grades: GB DIN AISI JIS 4Cr13 1.2038 420 S136 ► Introduction: 1.2083 die steel is the German brand Rooster special steel, plastic mould steel, the steel is stainless steel with high Cr content, containing more than 15% of Cr, has excellent abrasion resistance, acid proof and good polishing performance, good workability. After quenching, it is more wearable, suitable for electrical etching, suitable

Alloy Hot Work Mould Steel of Round Bar 1.2344 H13 SKD61 H13 is hot work die steel, the implementation of standard GB / T1299-2000. ; Grade 4Cr5MoSiV1; alloy tool steel referred to as the joint steel, carbon steel is based on the addition of alloying elements and the formation of steel. Among them, including: measuring tool with cutting tools, impact resistance steel, cold work die steel, hot die steel, non-magnetic die steel, plastic mold steel. 1. Chemical Composition(%) C

Alloy Steel D2 1.2379 Hot Rolled Steel Bar D2 is a high carbon, high chromium cold work tool steel. Recommended for use when greater toughness is required. It offers good wear resistance and high compressive strength. 1. Chemical composition(%): C Cr Mn Mo Si V P S 1.4-1.6 11-13 0.3-0.5 0.7-1.2 0.30-0.5 ≤0.8 ≤0.025 ≤0.025 2. Available size(mm): Flat Bar Size(mm) Round bar Size(mm) Thickness Width Length Diameter Length 6-160 155-810 3000-6000 50-120 3000-6000 3. Recommend

H13 1.2344 SKD61 hot rolled steel round bar With Diameter 12-150mm Chromium hot-work tool steels are classified as group H steels by the AISI classification system. This series of steels start from H1 to H19. H13 chromium hot-work steel is widely used in hot and cold work tooling applications. Due to its excellent combination of high toughness and fatigue resistance H13 is used more than any other tool steel in tooling applications. 1. Features a. Electro slag remelting,

H13 1.2344 SKD61 hot rolled steel round bar With Diameter 12-150mm H13 tool steel is air-hardening, hot work 5% chrome tool steel. It combines excellent shock and abrasion resistance with good red hardness making it ideal for use in die casting. Most commonly used in plastic molds and die casting, its ability to withstand rapid cooling from high working temperatures also make it a prime choice for use in extrusion dies. While designed to be a versatile hot work grade, H13

1.7225/SAE4140/SCM440/42CrMo4 Hot Rolled Alloy Steel Bar for mechanical Perform Standard: GB/T 3077-1999 C Si Mn Cr Mo P S Ni 0.38~0.45 0.17~0.37 0.60~0.90 0.90~1.20 0.15-0.25 ≤0.018 ≤0.030 ≤0.012 1, Application It used for section large forgings, such as locomotive traction gears, with supercharger drive gear, the rear axle, the connecting rod and the spring load greatly clip,oil drill pipe joints and fishing tools,etc. 2, Feature 1) Weldability suffers with increasing

1.2083 420 4Cr13 S136 Stainless Steel Round Bar of Alloy Steel 1.2083 mould steel is a kind of plastic mould steel with high chromium element which is up to 13%.1.2083 mould steel has good wear resistance and good polishing, it widely used for acid proof plastic mold. Similar grade:DIN 1.2083/X42Cr13/X40Cr14, AISI 420, JIS SUS420J2,Gost 4Cr13 1,Equivalent grades: GB DIN AISI JIS 4Cr13 1.2083 420 S136 2,Chemical composition (%) Steel Grade Chemical Composition(%) C Si Mn P S

Hot Rolled Alloy Steel Bar H13 1.2344 SKD61 with diameter 12-150mm 1.2344 H13 SKD61 4Cr5MoSiV1 die steels offers outstanding combination of shock and abrasion resistance, and possesses good red hardness. It's capable of withstanding rapid cooling and resists premature heat checking. Tool Steel H13 has good machinability, good weldability, good ductility, and can be formed by multi function Machinery conventional means. Due to Flat Bar Round Bar 1.2344 H13 SKD61 4Cr5MoSiV1

Annealing Machinery Hot Rolled Steel Bar H13 1.2344 SKD61 with diameter 12-150mm In steel Flat Bar Round Bar 1.2344 H13 SKD61 4Cr5MoSiV1, the molybdenum & vanadium acting as strengthening. The chromium content assists Hot Work Tool Steel Flat Bar Round Bar steel 1.2344 H13 SKD61 4Cr5MoSiV1 to resist softening when using at high temperatures. 1.2344 H13 SKD61 4Cr5MoSiV1 die steels offers outstanding combination of shock and abrasion resistance, and possesses good red hardness.

1.2344 H13 Alloy Hot Work DIE Steel Flat Bar With Length 3000-6000mm BLACK SURFACE 1.2344/H13/SKD61 steel is a pressure resistant hot work die steel. The steel is remelted by electroslag, uniform in material, good in hardenability, excellent in machinability and polishing performance, high toughness and plasticity, good high and low temperature wear resistance, and high temperature fatigue and heat resistance. 1. Chemical Composition(%) C Si Mn P S Cr Mo V 0.32-0.45 0.80-1.20

Turned Steel Round Bar of 1.2344 H13 SKD61 (diameter 16-200mm) Die-casting mould for aluminum, extrusion mould, and thin-walled plastics mould. 1, Features A, Good heat-resistance and fatigue-resistance. B, Good cutting and polishing performance. 2, Application Used for making hot squeeaing mould, forging mould and embedded lump. A, Suitable to manufacturing aluminum, zinc, copper alloy extrusion die, die casting, hot forging die and hot shear blades, etc. B, Extrusion mold

1.2083 420 SUS420J2 4Cr13 Stainless Steel Round Bar of Alloy Steel Corrosion-resistant die arrangement for plastics 1.2083 mould steel is a kind of plastic mould steel with high chromium element which is up to 13%.1.2083 mould steel has good wear resistance and Good Polishing, it widely used for acid proof plastic mold. Similar grade 420,S136,4Cr13 etc. Chemical composition (%) Grade delivery hardnessºC C Si P S Cr Ni Mo Mn 420 HRC32-36 0.4 0.8 ≤0.03 ≤0.03 13.5 ~ 0.6 0.5

Hot Rolled Alloy Steel Bar 1.2316 1.2083 420 4Cr13 of Stainless 1.2083 mould steel is a kind of plastic mould steel with high chromium element which is up to 13%.1.2083 mould steel has good wear resistance and good polishing, it widely used for acid proof plastic mold. Similar grade:DIN 1.2083/X42Cr13/X40Cr14, AISI 420, JIS SUS420J2,Gost 4Cr13 1,Equivalent grades: GB DIN AISI JIS 4Cr13 1.2083 420 S136 2,Chemical composition (%) Steel Grade Chemical Composition(%) C Si Mn P S

H13 /1.2344 /SKD61 Annealing Machinery Hot Work Tool Steel Round Bar 1.2344 H13 SKD61 4Cr5MoSiV1 Flat Bar Round Bar Tooling Steel belong to multi functional Machinery chromium hot work tool steels which are much widely using on hot and cold work tooling applications. 1.2344 H13 SKD61 4Cr5MoSiV1 tool steel is classified as range H steels by the AISI classification system range.This range of steels start from H1 to H19. In steel Flat Bar Round Bar 1.2344 H13 SKD61 4Cr5MoSiV1,

Hot Rolled Alloy Steel Bar For Mechanical SAE5140/1.7035/SCR440/40Cr Chemical composition(%): Si Mn S P Cr Ni Cu 0.17-0.37 0.70-0.90

SAE5140 40Cr 1.7035 SCR440 Hot Rolled Steel Bar of Special Steel Chemical composition(%): Si Mn S P Cr Ni Cu 0.17-0.37 0.70-0.90

Hot Sales Alloy Steel SAE4140, 42CrMo 1.7225, SCM440 Perform Standard: GB/T 3077-1999 C Si Mn Cr Mo P S Ni 0.38~0.45 0.17~0.37 0.60~0.90 0.90~1.20 0.15-0.25 ≤0.018 ≤0.030 ≤0.012 1, Application It used for section large forgings, such as locomotive traction gears, with supercharger drive gear, the rear axle, the connecting rod and the spring load greatly clip,oil drill pipe joints and fishing tools,etc. 2, Feature 1) Weldability suffers with increasing chromium content; 2)

Special Steel Alloy Engineering Steel Bar (SCM440, SAE4140, 1.7225, EN19) Perform Standard: GB/T 3077-1999 C Si Mn Cr Mo P S Ni 0.38~0.45 0.17~0.37 0.60~0.90 0.90~1.20 0.15-0.25 ≤0.018 ≤0.030 ≤0.012 1. Specification (Available Sizes) Diameter: 16,18,20,23,25,28,30,33,35,38,40,43,45,48,50, 55,60,65,70,75,80,85,90,95,100,110,120,130,140, 150,160,170,180,190,200,210,220,230,240,250,260, 270,280,290,300,310,320,330,340,350,360,370,380, 390,400,410,420,430,440,450 2. Application

Alloy Steel Round Bar 42CrMo/SAE4140/SCM440/1.7225 For Mechanical Product Introduction SAE 4140 alloy steel is chromium, molybdenum, manganese containing low alloy steel. It has high fatigue strength, abrasion and impact resistance, toughness, and torsional strength. Chemical Composition(%) C Si Mn Cr Mo P S Ni 0.38~0.45 0.17~0.37 0.60~0.90 0.90~1.20 0.15-0.25 ≤0.018 ≤0.030 ≤0.012 Features 1) Weldability suffers with increasing chromium content; 2) High temperature strength

H13 1.2344 SKD61 Hot Work Tool Steel Sheet and Plate H13 is hot work die steel, the implementation of standard GB / T1299-2000. ; Grade 4Cr5MoSiV1; alloy tool steel referred to as the joint steel, carbon steel is based on the addition of alloying elements and the formation of steel. Among them, including: measuring tool with cutting tools, impact resistance steel, cold work die steel, hot die steel, non-magnetic die steel, plastic mold steel. 1. Chemical Composition(%) C Si