Steel Flat Bar

alloy tool steel bar stock 1.2083 for Plastic Mould with dia. 10-350mm 1.2083 Steel is typical Stainless Chrome Plastic Mold Steel. German die steel 1.2083 is a chromium content up to 13% of the plastic die steel. 1.2083 mold steel has good polishing and excellent wear resistance, is often used to prevent acid plastic mold. Special Steel China Supplier and factory -OTAI SPECIAL STEEL COMPANY supply 2083 steel in round bar, plate, flat bar, square, block and others any shape.

Hot Rolled Carbon Tool Steel Flat Bar With Black Surface S50C / SAE1050 S50C Tool Steel Bar S50C steel is a high-strength medium carbon steel with low cold plastic deformation, poor weldability, poor hardenability but no temper brittleness and good machinability. Chemical Composition(%) C Si Mn P S Cr Ni Cu 0.47-0.53 0.15-0.35 0.6-0.9 ≤0.035 ≤0.035 ≤0.25 ≤0.25 ≤0.25 Regular hot rolled S50C flat bar sizes Thickness: 8-250mm Width: 155-710mm Length: 2200mm Mechanical properties

1.2083 Plastic Mould Steel Flat Bar for corrosion-resistant die 1.2083 mould steel is a kind of plastic mould steel with high chromium element which is up to 13%. 1.2083 mould steel has good wear resistance and good polishing, it widely used for acid proof plastic mold. Grades Comparison Germany(DIN) Japan(JIS) USA(AISI) Sweden(SS) China(GB) 1.2083 SUS420J2 420 S136 4Cr13 Chemical Composition(%) Steel Grade Chemical Composition(%) C Si Mn P S Cr 1.2083 0.36-0.42 ≤1.00 ≤1.00

Hot Rolled 1.2379 / D2 / SKD11 Long Service Life Cold Work Mould Steel Flat Bar 1.2379 / D2 is a high carbon and high chromium alloy tool steel with high hardness and wear resistance after heat treatment, and has the characteristics of strong quenching and good dimensional stability. Equivalent grades: GB DIN AISI JIS Cr12Mo1V1 1.2379 D2 SKD11 Brief introduction: 1.2379 / D2 die steel, high wear resistance and micro deformation, cold working die steel, wind hard tool steel,

Special Steel Corrosion-resistant Plastic Mould Steel 1.2316H Flat Bar Pre-hardened Product Introduction Martensitic stainless steel, Cr-Mo, corrosion resistance improved as compared to similar only to Cr (eg. 1.2083), and it is polishable suitable for photoengraving. It is used for molds and particular for plastics very aggressive due to corrosive action and the presence of abrasive additives. 1.2316 are in the class of plastic mold and stainless steel which was developed

Special Steel Corrosion-resistant Plastic Mould Steel S136 1.2083 420 4Cr13 Flats Product Introduction GB standard 4Cr13 die/tool steel properties high hardness after quenching than 3crl3 some corrosion resistance. use for the cutting tools, nozzle, value seats and so on. 1crl7Ni2 characteristics and strong resistance to nitric acid corrosion. Use of high hardness and high wear resistance for the heat pumps, valves, valve bearings, medical equipment, springs and other parts.

Black Surface of Hot Rolled Carbon Steel Flat Bar C50 S50C SAE1050 1.1210 Used for making injection plastic mould, mould frame and some mid-range machines. Specifications 1. Grade: SAE1050/S50C/1.1210/50# 2. Standard: ASTM, AISI, JIS, DIN, GB 3. Hot Rolled Condition: Annealing, Black Surface Chemical Composition(%) Grade C Si Mn P S SAE 1050 0.48-0.55 0.15-0.35 0.60-0.90 ≤0.030 ≤0.050 Hot Sale Products for Carbon Steel flat bar & round bar STANDARD Flat Bar Size(mm) Round bar

D2 (SKD11, 1.2379) Mould Steel Flat Bar of Cold Work Tool Steel D2 mold steel has high wear resistance, micro-deformation cold work die steel, wind hard tool steel, carbon content up to 1.5%, high chromium content of 11.5%,heat treatment hardness up to 60HRC.D2 steel can be used to manufacture large cross-section, complex shape, subject to the impact of large, high wear resistance of cold work die steel, such as silicon steel die, cold cut scissors, trimming die etc. Grade GB

Die Steel Hot Work Steel Flat Bar and Round Bar 1.2344 H13 SKD61 1, Features A, Good heat-resistance and fatigue-resistance. B, Good cutting and polishing performance. 2, Application Used for making hot squeeaing mould,forging mould and embedded lump. A, Suitable to manufacturing aluminum, zinc, copper alloy extrusion die, die casting, hot forging die and hot shear blades, etc. B, Extrusion mold of aluminum and magnesium, die-casting mold, especially adapt to the mold in

Martensitic Polishing Q+T S136H Stainless Steel Flat Bar For Plastic Mould Product Introduction 2083 is a tool steel in the group of plastic mold and stainless in matesitic (AISI420)So, it can stand for corrosive and can be quench to enhance it's strength together with corrosive resistance properties.Hardness can reach up to 56 HrC , this also benefit to polishing properties and can do texturing.Suitable for plastic mold that need corrosive resistance such as amino plastic

Martensitic Stainless Steel Flat Bar S136H 6-150mm on stock pre-hardened Product Introduction Alloy 420 is a hardenable, martensitic stainless steel that is a modification of Alloy 410. Similar to 410, it contains a minimum of 12% chromium, just sufficient enough to give corrosion resistant properties. Alloy 420 has higher carbon content than Alloy 410 which is designed to optimize strength and hardness characteristics. It has good ductility it the annealed condition but is

D2 SKD11 1.2379 Cr12Mo1V1 Cold Work Tool flat bar steel for mold D2 steel is an air hardening, high-carbon, high-chromium tool steel. It has high wear and abrasion resistant properties. D2 Tool Steel is characterized by a relatively high attainable hardness and numerous, large, chromium-rich alloy carbides in the microstructure. Chemical Composition (%) C Si Mn P S Cr Mo V 1.4-1.6 0.30-0.5 0.3-0.5 ≤0.030 ≤0.030 11-13 0.7-1.2 ≤0.80 Product Description Size of Steel grade 1

AISI D2 D3 D5 D6 Hot Forged Rolled Tool Steel Flat Bar for tools and dies D2 steel round bar and plate can be used to produce cold work mold with a large cross-section, complex shape, high impact force, and high wear resistance. It has high hardenability and the high-temperature oxidation resistance is good. The anti-corrosion ability is good after quenching and polishing, and the deformation is small after the steel heat treatment. D2 tool steel composition and more

SKD11 Forged Rolled Tool Steel Flat Bar 1.2379/X153crmo12 D2 D2 Tool Steel is a versatile high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium-rich alloy carbides in the microstructure. These carbides provide good resistance to wear from sliding contact with other metals and abrasive materials. Chemical Composition (%) C Si Mn P S Cr Mo V 1.4-1.6 0.30-0.5 0.3-0.5 ≤0.030 ≤0.030 11-13 0

D2 SKD11 1.2379 Cr12Mo1V1 Hot Rolled Cold Work Tool Steel Flat Metal Bar D2 provides an effective combination of wear resistance and toughness, tool performance, price, and a wide variety of product forms. Chemical Composition (%) C Si Mn P S Cr Mo V 1.4-1.6 0.30-0.5 0.3-0.5 ≤0.030 ≤0.030 11-13 0.7-1.2 ≤0.80 Product Description Size of Steel grade 1.2379 mechanical properties Round bar Diameter(mm) Length (mm) Max:120 Max: 6000 Plate Thickness(mm) Width (mm) Length (mm) Max

Special Quenched and Tempered Tool Steel Flat Bar SAE5140 / 40Cr SAE5140 / 40Cr steel is one of the most widely used steel in machinery manufacturing, it is suitable for making medium-sized plastic mold. Chemical composition(%): C Si Mn S P Cr Ni Cu 0.37-0.44 0.17-0.37 0.50-0.80 ≤0.035 ≤0.035 0.80-1.10 ≤0.30 ≤0.30 Applications: 1. The steel is used to manufacture mechanical parts with moderate load and moderate speed, such as steering knuckle and rear axle of the car, gear,

Special Plastic Tool Steel Bar With Extremely Good Mirror Grinding Chemical Composition(%) Grade C Si Mn P S Ni Mo Cu Al 0.06-0.20 ≤0.35 1.40-1.70 ≤0.030 ≤0.030 2.80-3.40 0.20-0.50 0.80-1.20 0.70-1.30 P21 0.10-0.18 ≤0.35 1.70-2.0 ≤0.030 ≤0.030 2.90-3.40 0.20-0.50 0.80-1.20 0.70-1 Available size(mm) Plate/Flat Bar Size(mm) Round bar Size(mm) Thickness Width Length Diameter Length 10-1100 155-2200 2000-6000 20-200 2000-6000 Use range Generally used in the mirror

High Hardness, High Wear Resistance Tool Steel Bar 4Cr13 / 1.2083 / 420 4Cr13 tool steel properties after quenching 3Cr13 hardness higher, corrosion resistance is good. Use as a cutting tool, nozzle, valve seat and so on. 1Cr17Ni2 characteristics of a strong resistance to nitric acid and organic acid corrosion. Use for higher hardness and high wear resistance of hot oil pumps, valves, valve bearings, medical equipment, springs and other parts. Equivalent grades GB DIN AISI

Guangzhou P20 / 1.2311 Special Tool Steel bar for Plastic Mould P20 tool steel bar is a type of mold welding consumables, suitable for the production of plastic mold and die-casting low melting point metal mold material. It has good machinability and mirror grinding performance. Delivery condition Hot rolled or forged, black surface, pre-hardened or tempering to 28-33HRC/30-35HRC Equivalent grades AISI: P20 DIN: 1.2311 GB: 3Cr2Mo JIS: PDS-3 Chemical Composition(%) C: 0.28-0.4

Good Polishability Good Machinability Corrosion-resistant Plastic Mould Steel DIN1.2316 Steel Flat Bar Product Introduction Martensitic stainless steel, Cr-Mo, corrosion resistance improved as compared to similar only to Cr (eg. 1.2083), and it is polishable suitable for photoengraving. It is used for molds and particular for plastics very aggressive due to corrosive action and the presence of abrasive additives. 1.2316 are in the class of plastic mold and stainless steel