OPGW Hardware Fittings

Vibration damper for OPGW 4D Vibration damper is composed of two different weight hammers stranded galvanization steel wire with high elasticity and high-intensity, and aluminum alloy clamp. The 4D series Vibration dampers we provided are Stock-bridge Tuning Fork,with four resonant frequencies ,the frequency range is from 3Hz to 150Hz.with wide frequency range ,the 4D vibration damper can highly consume vibration energy,and effectively dissipate the energy caused by cable

High Voltage Overhead Conductor Aluminium Alloy AAAC Totara Conductor Quick Details Model Number: AAAC Totara Conductor Material: Aluminium Insulation Material: AAAC Totara Conductor Application: Overhead Transmission Line Reference standard: ASTM B, BS, DIN, IEC Certification: ISO, CCC, TUV, CE Voltage: up to 1000KV Calculated area: 498.1mm2 Nominal area: 425mm2 No. of wires: 37 Diameter of wire: 4.14 mm Packaging & Delivery Packaging Details: New wooden drum, Reel, Circle

Overhead Application Aluminum Conductor Steel Reinforced Bare ACSR Martin Cable Quick Details Model Number: ACSR Martin Conductor Conductor Material: Aluminium Insulation Material: Bare Application: Overhead Transmission Line Reference standard: BS 215-2 / BS EN 50182 / IEC 61089 / ASTM B 232/B 232M / DIN 48204 / JIS C 3110 Certification: ISO, CCC, TUV, CE Voltage: up to 1000KV Packaging & Delivery Packaging Details: New wooden drum, Reel, Circle or according to customer's

Low Voltage Overhead Bare Conduct Aluminum Steel-reinforced ACSR Conductor Quick Details Model Number ACSR Condutor Type Standard Conductor material Aluminum, Aluminum Clad Steel Apllication Overhead, overhead cable Type Low Voltage Place of Origin Guangdong, China (Mainland) Description ACSR conductors are formed by several wires of aluminium and galvanized steel, stranded in concentric layers. The wire or wires which form the core, are made of galvanized steeland the

Metal joint box for OPGW Optical fiber joint box is used for protecting the optical fiber fusionsplicing head between two different optical cabers;a reserved section of optical fiber will be kept in the box for maintenance purpose. It has some excellent performances such as good sealing property,waterproof, moisture-resistant and incorrodible after being installed on the electric power line. In according to environmental conditions, Optical fiber joint box is divided into

Overhead Conductor ACSR Tern 795 mcm Conductor with ASTM B232 Standard Quick Details Model Number: ACSR tern Conductor Conductor Material: Aluminium Alloy Conductor Application: Overhead Transmission Line Cross section: 6~1250mm2 Type: High Voltage Reference standard: IEC, ASTM , BS , DIN Voltage: up to 1000KV Packaging & Delivery Packaging Details: New wooden drum, Reel, Circle or according to customer's request Delivery Time: According to customer's request, usually 2-4

ACSR Canary, Ortlan, Cardinal Cable for Overhead Transmission and Distribution Quick Details Model Number: ACSR Canary Cable Conductor Material: Aluminium Insulation Material: ACSR Conductor Application: Overhead Transmission Line Cross section: 6~1250mm2 Reference standard: IEC, ASTM , BS , DIN Certification: ISO, CE, KEMA, CCC, IEC Voltage: up to 400KV Packaging & Delivery Packaging Details: New wooden drum, Reel, Circle or according to customer's request Delivery Time:

Overhead Power Transmission Line ACSR Conductor Aluminium Clad Steel Quick Details Model Number ACSR Condutor Type Standard Conductor material Aluminum, Aluminum Clad Steel Apllication Overhead, overhead cable Type High Voltage Place of Origin Guangdong, China (Mainland) Description ACSR conductors are formed by several wires of aluminium and galvanized steel, stranded in concentric layers. The wire or wires which form the core, are made of galvanized steeland the external

High Voltage Conductor Aluminium Alloy AAAC Mulberry Conductor For Overhead line Quick Details Model Number: AAAC Mulberry Conductor Material: Aluminium Insulation Material: AAAC Mulberry Conductor Application: Overhead Transmission Line Reference standard: ASTM B, BS, DIN, IEC Certification: ISO, CCC, TUV, CE Voltage: up to 1000KV Calculated area: 150.9mm2 Nominal area: 125mm2 No. of wires: 19 Diameter of wire: 3.18 mm Packaging & Delivery Packaging Details: New wooden drum,

Terminal box for OPGW Terminal Box is mainly uesd for optic fiber cable terminal fixation, fusion beteen optic fiber cable and pigtail, storage and protection of the reserved optic fiber. Generally,terminal box is including two performance structures, one is full accessories structure,and the other is empty match structure. We are an ISO9001:2000 certified company. All Manufactured products have been thoroughly tested in accordance with the national standards prior to

insulator top tie PVC plastic line ties / top ties are intended for use with covered conductors and vertically-mounted tie top insulators on crossarms or pole-top-mounted insulators. Line angles of up to 15°can be accommodated when used with any plastic covered conductor. Material: We use the all new raw material, not recycling material to make the product. so it has the following advantages such as UV resistance, good tensile strength, impact strength and flexural strength

Plastic Joint box dome splice closure for ADSS Optical fiber joint box is used for protecting the optical fiber fusion splicing head between two different optical cabers;a reserved section of optical fiber will be kept in the box for maintenance purpose. It has some excellent performances such as good sealing property, waterproof, moisture-resistant and incorrodible after being installed on the electric power line. In according to environmental conditions, Optical fiber joint

PVC spiral vibration damper Spiral Vibration Damper is made of engineering plastic which is high strength,aging resistance and high elastic;it will not cause any mechanical damage to the optical fiber caber. Spiral Vibration Damper is widely used in ADSS cable installation.It is composed of a short part of gripping section and a long damping section. The gripping section can effectively close upon the cable to make sure the spiral vibration damper to fix on the cable firmly;

Down lead clamp for OPGW Down Lead Clamp is used for fixation of OPGW and ADSS onto the pole/tower.It is suitable for all kinds of cable diameter;the installation is reliable ,convenient and fast. Down Lead Clamp is divided into two basic types:pole used and tower used.Each basic type is divided into elector-insulating rubber and metal type. Elector-insulating rubber type Down Lead Clamp is generally used for ADSS installation,while metal type Down Lead Clamp is generally

Plastic tension clamp This Conical wedge clamp composed of an opened thermopastic body with very high mechanical and climatic resistance, an inner sheath consisting one or two insulating plastic wedges ensuring the clamping of the neutral messenger without damaging cable insulation. two stainless bail ends are compressed on it to lock intoclamp. Simple assembling because the wedges open by pulling them back. The flexible stend loop can be fixed into a closed eye bractet.

PVC Prefomed bird-flight diverter The Bird-Flight Diverter is designed to make overhead lines and guyed structures visible to birds and provides an economical means of reducing the hazard to both lines and birds. Material: It is made of rigid high impact polyvinyl chloride(PVC), which possesses excellent chemical resistance, strength properties and will retain good physical characteristics within a range of extreme temperatures. Industrial fumes and salt water can not

Cable storage assembly for OPGW Cable Storage Assembly is used for storage of reserved optical fiber cable. it is divided into inserted type storage and outside coil type storage.they are generally installed on the strain tower and pole. After sales service Our working team and sales team can guarantee a fast and high efficiency after-sale service for our product sold to everywhere of the global. GZ Xinyaun Hengye has a complete supply system for the materials and parts,

Dead end clamp for OPGW Helical Tension Set OPGW is mainly used for installation of cable with less than 160KN RTS onto tension tower/pole,corner tower/pole,and terminal tower/pole.A complete set of OPGW Helical Tension Set includes Aluminum Alloy or Aluminum or Aluminum-Clad steel Dead-end,Structural Reinforcing Rods,Supporting fittings and Grounding wire Clamps etc.

Overhead Line Conductor High Votlage Aluminium Alloy AAAC Hazel Conductor Quick Details Model Number: AAAC Hazel Conductor Material: Aluminium Application: Overhead Transmission Line Calculated area: 59.9mm2 Nominal area: 50mm2 Weight: 163.4 kg/km Voltage: up to 1000KV Packaging & Delivery Packaging Details: New wooden drum, Reel, Circle or according to customer's request Delivery Time: According to customer's request, usually 2-4 weeks. Description All Aluminum-Alloy

suspension clamp for OPGW ◆ Usage and characteristics Helical Suspension Set is mainly used for hanging and supporting opgical fiber cable on straight pole and tower,to transmit axial load and divert axial pressure which provide well protection for optical cable,to avoid emergencies happen such as too small bending radius or stress comcentration.Grip strength of the Suspension Set is larger than 15%-20% rated tensile strength of the cable,which is fatigue resistance and can