Directional Control Valve

Monoblock Spool Valve for Kubota P40 series valves with middle-high pressure monoblock construction is developed based on Europe technology. 1. Inner check valve: The check valve inside the valve body is to insure the hydraulic oil not to be returned. 2. Inner relief valve: The relief valve inside the valve body is able to adjust the hydraulic system working pressure. 3. Oil way: Parallel circuit, power beyond option 4. Control Way: Manual control,

2P80 G1,2 Monoblock Hydraulic Directional Control Valve Description Manually or mechanically controlled hydraulic directional control valve 02Р80 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It is manufactured with 1 to 7 plungers, with parallel or serial action, with common or individual back valve for each plunger, with or without safety valve. Construction Р80 is a mono-bloc

The 5P40DY-OT is a high-performance directional control valve that strictly adheres to the D05 (NFPA D05 / CETOP 5 / ISO 4401-05) mounting interface standard, allowing for seamless interchangeability with similar products from mainstream European and American brands. Designed specifically to replace D05-size directional control valves from brands such as Rexroth, Parker, Vickers, and Continental, this product is an ideal choice for equipment manufacturers and distributors.

The 4P80DY-OT is a high-performance solenoid-operated directional control valve. It strictly adheres to the D05 (NFPA D05 / CETOP 5 / ISO 4401-05) mounting interface standard, allowing for seamless interchangeability with similar products from major European and American brands. This product is specifically designed to replace D05-size directional control valves from brands such as Rexroth, Parker, Vickers, Yuken, and Continental. Compatible Brands and Models The 4P80DY-OT

Hydraulic monoblock valve 4 sections-45l-min ORTA MB25-4 for TELESCOPIC TRUCK type details: type code:ZP50-4 matching MB25-4 The MB25/4--ZP50-4 is a 4-spool monoblock hydraulic directional control valve used to direct and regulate hydraulic fluid flow . Built for mobile applications and industrial machinery, it operates at a maximum flow rate of 45 liters per minute (12 GPM) and pressures up to 250 bar (approx. 3600 PSI). flow rate:50liters spool type:4 spools pressure:200bar

Hydraulic Mobile Lever Valves MB25 - 45 L/min for aerial platforms type details: type code:ZP50-2 matching MB25-2 flow rate:50liters spool type:2spools pressure:200bar inlet port:G1/2 working port:G3/8 control: 3position double acting,A/B open at central outlet port:G3/8 Control type: manual control Circuit type: parallel Application : Cranes, Telescopic boom fork lifts, Back-hoe Excavators and Compactors,Sanitation Vehicles flow rate 50 liters number of spools 2 banks inlet

Hydraulic directional control valve 4P80 with 80ml/min 4 handles, electric-pneumatic valve type code 4P80DY-OT flow rate 80 liters number of spools 4 manual control inlet section valve side inlet, with relief valve relief valve set pressure 250bar inlet port size G1/2 spool type 3 positons, double acting handle side arrangement standard handle spool cap side arrangement 3position, spring return working section arrangement standard type work port size G1/2 outlet section type

Electro-Pneumatic Hydraulic Directional Control Valves Hydraulic Valve type code 5P40DY-OT electric-pneumatic valve, with 24VDC Code: P40 litersSections: 5 spoolsRelief Valve Setting Pressure:200(bar)Intlet Port Option: G3/8Control Method Option: manual control +electric control+pneumatic controlSpool Function: 3 Positions, double acting;Spool Returning Way:spring returnWorking Port Option: G3/8Outlet Port Option: G3/8 flow rate 40 liters number of spools 5 spools inlet

AKON Hydraulic monoblock valve pneumatic-electric valve with 4 spools type code P40DY-4 electric-pneumatic valve, with12VDC Code: P40 litersSections: 4Relief Valve Setting Pressure:180(bar)Intlet Port Option: G3/8Control Method Option: manual control +electric control+pneumatic controlSpool Function: 3 Positions, double acting;Spool Returning Way:spring returnWorking Port Option: G3/8Outlet Port Option: G3/8 flow rate 40 liters number of spools 4 spools inlet section valve

Wide Compatibility, Adaptable to Mainstream European & American Brands As a core control component of industrial hydraulic systems, the SDS180-1 Hydraulic Valve has become the preferred alternative for foreign distributors and industrial enterprises, relying on its precise control performance, wide compatibility and prominent cost advantages. It is suitable for various industrial machinery, construction machinery and fluid control systems, helping partners reduce costs,

SD25/1 Directional Control Valve, 3 position double acting, A B Open at neutral, 240 lpm, max 315 bar flow rate 240liters number of spools 1 Spool inlet section valve side inlet, with relief valve relief valve set pressure 315bar inlet port size G1 spool type 3 positon handle side arrangement standard handle spool cap side arrangement 3 position double acting, A B Open at neutral working section arrangement standard type work port size G3/4 outlet section type side outlet

SD25/1 Directional Control Valve, 3 position, A B Closed at Neutral, 240 LPM, 315 BAR flow rate 240liters number of spools 1 Spool inlet section valve side inlet, with relief valve relief valve set pressure 315bar inlet port size G1 spool type 3 positon handle side arrangement standard handle spool cap side arrangement 3 position double acting, A/B Closed at Neutral working section arrangement standard type work port size G3/4 outlet section type side outlet outlet port size

Directional Control Valve DCV140/1, 350 BAR flow rate 140liters number of spools 1 Spool inlet section valve side inlet, with relief valve relief valve set pressure 315bar inlet port size G1 spool type 3 positon handle side arrangement standard handle spool cap side arrangement 3position, spring return working section arrangement standard type work port size G3/4 outlet section type top outlet outlet port size G1 Directional Control Valve 20-200L, 100 - 350 BAR Hydraulic

SD25/1 spool, double acting, A+B closed Walvoil hydraulic section valve Features: HSSD25-1-RD1ST1-G18 flow rate 240liters,63gpm number of spools 1 lever inlet section valve side inlet, with relief valve relief valve set pressure 200 bar inlet port size G1-1/4 spool type 3 positon, double acting handle side arrangement rotary manual control spool cap side arrangement 3positions, spring return working section arrangement standard type work port size G1-1/4 outlet section type

Hydraulic Control Valve DCV100, with one rotary manual control lever Mobile Directional Valves Features: DCV100-1 flow rate 100liters,26.5gpm number of spools 1 lever inlet section valve side inlet, with relief valve relief valve set pressure 100-315bar,max pressure 315bar inlet port size SAE Ports, BSPP ports, Metric ports spool type 3 positon, double acting handle side arrangement rotary manual control spool cap side arrangement 3positions, spring return working section

7P80 1 A1 GKZ1 - MONOBLOCK DIRECTIONAL CONTROL VALVES 80LITERS CONTROL VALVE type code 7P80 1 A1 A1 A1 A1 A1 A1 A1 GKZ1 flow rate 80 liters number of spools 7 manual control inlet section valve side inlet, with relief valve relief valve set pressure 250bar inlet port size G1/2 spool type 3 positons, double acting handle side arrangement standard handle spool cap side arrangement 3position, spring return working section arrangement standard type work port size G1/2 outlet

DCV Directional Control Valve Hydraulic 15.8GPM High pressure valve with handle at 180° Type code DCV60-6-250-G08-ST1C2D1 flow rate:60liters/15.8gpm Spool type: 6 levers controling method:handle at 180° other details as below: Control Method Manual, Pneumatic, Electro-pneumatic, Electro-hydraulic, Hydraulic, Hydraulic and Manual, Cable, Joystick, Solenoid and Manual, Solenoid and Joystick, Manual and Joystick Spool 1 Spool, 2 Spool, 3 Spool, 4 Spool, 5 Spool, 6 Spool, 7 Spool

FMA-4N-8.8S Four-Way Gear Diverter The FMA-4N-8.8S is a four-way gear diverter designed for hydraulic systems in mobile machinery applications. This series is engineered to control synchronous movement of hydraulic cylinders or motors, providing precise fluid control essential for construction and industrial equipment. Product Specifications Model Number: FMA-4N-8.8S Displacement: 8.8 cc/revolution Material: Case Iron Pressure Rating: 21 MPa Configuration: 4-way diverter Type

FMA-4N-2.1S Four-Way Gear Diverter 2.1cc for Mobile Machinery The FMA-4N-2.1S is a four-way gear diverter designed for hydraulic systems in mobile machinery applications. This series is engineered to control synchronous movement of hydraulic cylinders or motors, providing precise fluid control essential for construction and industrial equipment. Product Specifications Model Number: FMA-4N-2.1S Product Images Model Code Explanation Code Segment Meaning FMA Hydraulic gear

380L 100GPM High-performance hydraulic valves, max pressure 315 bar, up to 12 sections, globally compatible, the best value choice! Model No.: SDS380-1 Technical Information: Control Method Manual Presure Medium Mineral oil based hydraulic oil Nominal Flow 380 L/min (100 gpm) Viscosity Range 15 CST- 75 CST Operating Pressure 315 bar (31.5 MPa) Ambient Temp -40°C to +80°C (-40°F to +176°F) Valve Structure Sectional Valve Valve Sections 1 - 12 Bank Rustproof Level Neutral salt