Duct Zone Dampers

125mm Diameter Electric Air Damper , Galvanized Steel and Stainless Steel Description:Size: 100mm, 150mm, 200mm,250mm,300mm, 315mm... (other sizes optional according to customer's requirement); Warmed by special thermal material with sound resistant feartures; Painted in high temperature with green colour ; Customized size available Electric Air Damper Specifications: CommodityOuter DiameterHeighFlange widthRemarkElectric Air Damper51mm150mm25mmsilicone sealElectric Air

Duct Fittings Pneumatic Air Damper 250mm For Dust Extraction System Available in : Sizes from 80mm ,100mm,120mm,125mm,140mm,150mm, 160mm,180mm,200mm,300mm,400mm Diameter Introduction of Slide Damper: The pneumatic slide dampers can be used in setting up an industrial dust collection system. The use of pneumatic slide dampers enables the efficient prevention of pressure losses in the extraction system Our Services: Consult Any inquiries will be replied within 24 hours. Serices

OD51-250mm stainless steel electric air duct damper valve HVAC air ducting motorized air damper AC220V DC12/24V Description:An Air damper (also called a duct damper) is a movable plate, located in the ductwork, that regulates airflow and redirects it to specific areas of the home. Dampers are typically used in zoning or “zone control” system Electric Air Damper Specifications:CommodityOuter DiameterHeighFlange widthRemarkElectric Air Damper51mm150mm25mmsilicone sealElectric

150mm diameter pneumatic sliding damper / blast gate with straight pipe Description: They are fabricated from galvanised steel. They are perfect for dust collection system to shut off lines to machines that are not being used. This will increase suction to the other machines being used. Specifications: Size: 80-400mm Thickness: 1.5mm, 2.0mm Material: carbon steel Surface: galvanized , can also be supplied in stainless steel Coil Voltage :220V AC OR 24V DC Larger sizes are

80-450mm Diameter Dust Collection Ducting Pneumatic Sliding Damper Introduction: The sliding damper is equipped with a pneumatic actuator. Sliding damper (blast gate) is used in dust collection systems to shut off a line or control the air flow. Specifications: Diameter range:80-450mm Thickness:1.5mm,2.0mm Valve :24V, 220V Our Services: Consult Any inquiries will be replied within 24 hours. Serices Professional team Faster delivery Sample will be prepared in 2-3 days Shipping

6 Inch Round Stainless Steel Check Valve Back Draft Air Damper Backdraft air damper Description: An HVAC air damper (also called a duct damper) is a movable plate, located in the ductwork, that regulates airflow and redirects it to specific areas of the home. Dampers are typically used in zoning or “zone control” systems. Electric Air Damper Specifications: Commodity Outer Diameter Heigh Flange width Electric Air Damper 51mm 150mm 25mm Electric Air Damper 63mm 150mm 25mm

200mm Diameter Ductwork System Air - Tight Pneumatic Blast Gates Application of Blast Gate: The sliding damper is equipped with a pneumatic actuator. Sliding damper (blast gate) is used in dust collection systems to shut off a line or control the air flow.The power supply of the magnetic valve: 220V, 24V should be specified during the ordering process. Specification: Size: 80-400mm Connection type: Clamp or Welding From Ø 80 to Ø 160 mm, pneumatic blast gates are equipped

300mm Diameter DIY Dust Collector Blast Gate For Dust Collection Sytems Description: Sliding damper is equipped with a pneumatic actuator. It is used in dust collection systems to shut off a line or control the air flow. The power supply of the solenoid valve: 220V AC or 24V DC should be specified during the ordering process. Specifications: Size: 80-400mm Thickness: 1.5mm, 2.0mm Material: carbon steel Surface: galvanized , can also be supplied in stainless steel Email: info

Product Description: Duct Zone Dampers are the essential components of any HVAC duct control system, providing zoning capabilities to HVAC systems. These dampers are designed with a galvanized steel frame and feature a flat damper blade with a gasketed seal for optimum performance. The damper is operated by a motorized actuator, allowing it to be opened or closed as desired, making them ideal for controlling the airflow in HVAC duct zoning systems. With Duct Zone Dampers,

150mm Pneumatics Sliding Damper Blast Gate Duct Zone Dampers product detail: There are two operation modes of pneumatic sliding damper: pneumatic and manual. Electric can consult us. It is often used for the connection of dust collection pipe. Connection of flanged pipe, straight pipe or spiral hose. the material :Galvanized carbon steel / stainless steel 304 size: from 80mm to 350mm Sealing ring within 200 mm the prices is Good,please contact me 24V DC / 220V AC Tel:+86

150mm Pneumatics Sliding Damper Blast Gate Duct Zone Dampers product detail: This product is used for dust removal equipment system, ventilation pipe link. Adjust or change the air volume manually or pneumatically. The size less than 200 mm has sealing ring inside. For larger specifications, please contact Amy if you need to have sealing ring. the material :Galvanized carbon steel / stainless steel 304 size: from 80mm to 350mm the prices is Good,please contact me Tel:+86

180mm Pneumatic Slide Damper Used In Dust Collection System Application: pneumatic slide dampers can be used in setting up an industrial dust collection system. The use of pneumatic slide dampers enables the efficient prevention of pressure losses in the extraction system Electric valve: The opening/closing of the damper is triggered by an electric connector between the electric valve and the system’s control unit. Select the appropriate pneumatic slide damper for your wood

200mm Pneumatic Sliding Damper for fume extraction system Air duct dampers are used in dust extraction systems to adjust and control airflow into particular duct branches. A dust extraction system must be equipped with dampers (manual or pneumatic) installed close to each extraction point of the transported material, e.g. sawdust, metal shaves to balance the whole system. Specifications: Material: stainless steel, carbon steel Diameter: 80-450mm Feature: Used for duct systems

Zinc Plated Carbon Steel Pneumatic Air Duct Damper 100mm Air duct dampers are used in dust extraction systems to adjust and control airflow into particular duct branches. A dust extraction system must be equipped with dampers (manual or pneumatic) installed close to each extraction point of the transported material, e.g. sawdust, metal shaves to balance the whole system. Specifications: Commodity Pneumatic Blast Gate Diameter 80-450mm Edge Straight edge and bend edge OEM

80-250mm Dust Collection Manual Blast Gate / Sliding Damper Size:80-250mm Material: carbon steel Surface: galvanized Application: used for dust colleaction system, ventilation system, fume extraction system. Company Introduction: Established in 1990, Hebei Yunpeng Machinery is a leading enterprise whose hardware processing and trade is intergrative. Our factory locateds in Shijiazhuang and Langfang. Hebei province where is close to Beijing and Tianjin Port. So it isConvenient

Industrial Ducting Installation Galvanized Pneumatic Blast Gate Introduction: The sliding damper is made with electro galvanised steel plate. The damper body consist of 2 shells bolted together, and a sliding plate in-between. The strongness of the damper is obtained by the use of 1.5 to 2 mm thick plate for the 2 shells and 2 to 2.5 mm for the sliding plate. To prevent unlock of the bolts, all nuts are self-locking. Specifications: Commodity Pneumatic Blast Gate Diameter 80

Galvanized Steel Manual Air Valve Backdraft Valve For Ductwork System Manual Air Damper Feature: 1. It is a volume controller installed in the air duct of air-conditioning and ventilation systems. 2. The open degree of blades is controlled by manual actuator or electric motor. 3. The material could be sprayed galvanized sheet or aluminum alloy or stainless steel. 4. It is applied to air conditioning and air purification systems Specifications: Size : 51mm,63mm,75mm,80mm,100mm

Duct Fittings Dust Collection Blast Gate 80-400mm Galvanized Or Stainless Steel From Ø 80 to Ø 160 mm, dust collection blast gate are equipped with 1 cylinder. By experience, for a reliable, perfect and safe duty, we have noticed that pneumatics blast gate of Ø 180 mm and more, work much better when equipped with 2 cylinders. Application of Dust Collection Blast Gate: It mainly used in Food industry,Pharmaceutical industryPetrochemical industry,Automotive industry,Constructio

Electric Round Fire Damper Fire Draft Blocker Backdraft Damper Fire And Smoke Damper Actuator Description:An air damper is a complex mechanism with many moving elements. Their main components are the blades, which adjust their position to control airflow. In addition, dampers include frames, linkages, axles, bearings, seals, blade pins, actuating motors, flanging, jackshafts, and sleeves, among other components. Electric Air Damper Specifications:CommodityOuter DiameterHeight

201/304 stainless steel ABS electric air duct damper motorized AC220V DC24V DC12V actuator with switch​ Description: An air damper is a device that uses valves or plates to stop or regulate the flow of air within a duct, chimney, variable-air-volume (VAV) box, air-handling unit or other similar pieces of equipment. Dampers are also used to stop airflow into unoccupied or unused rooms where air conditioning is not required. In addition, dampers can also be used as protection