Plastic Testing Equipment

Computer Control Fire Testing Equipment Cone Calorimeter with Software for Building Materials ASTM E 1474 Description: The Cone Calorimeter is the most significant bench scale instrument in the field of fire testing. Heat release is the key measurement required to assess the fire development of materials and products. Traditionally it has been very difficult to measure and more recently full scale testing of items (e.g. furniture) has been possible by burning these articles

PID Temperature Control Melt Flow Rate Testing Equipment for Wire and Cable Specifications: Measuring range 0.1-800 .00g/10min (MFR) 0.1-800.00 cm3/10min (MVR) Temperature range room temperature -450 ℃ Temperature accuracy ± 0.2 ℃ Timing accuracy 0.1S Displacement accuracy 0.01mm Load full load Material cutting modes manual, time control, automatic Barrel diameter 9.550mm ± 0.025mm Barrel Length 160mm Die made of tungsten carbide, length: 8.000mm ± 0.025mm diameter: 2.095mm ±

ISO 2507 HDT and Vicat Heat Deflection Temperature Testing Equipment for Plastic Products Compliance with the standard: ASTM-D648 JIS-K7191 ISO-2507 Scope of application: Mainly applicable to the determination of plastic test pieces, thermal deformation HDT... Three-point loading under the bending stress deformation temperature and plastic Vicat softening temperature test method ... plastic samples under the specified conditions, the needle penetration phenomenon temperature.

ISO812 and ISO974 Brittleness Temperature Impact Resistance Testing Equipment for Plastic Compliance with the standard: in line with GB5470-85, GB1682 test standards, applicable to the plastic impact embrittlement temperature measurement, with the impact of the impact cone sample, there is a failure probability of 50% when the temperature is brittle temperature. The plastic impact embrittlement temperature measuring instrument adopts a cryogenic refrigerator combined with

ASTMD495 Insulating Materials High Voltage Low Current Arc Resistance Testing Equipment Mainly applicable to: GB/T1411-2002 dry solid insulation materials High voltage, low current arc discharge test. Compliance with the standard: This tester is designed and manufactured in accordance with GB1411, IPC650, IEC 61621, ASTMD495, and complies with JEC 149, UL 746A and other test methods. Scope of application: The arc resistance of insulating materials such as plastics, resin

DX9028 Safety Helmet Impact Penetration Resistance Testing Equipment Scope of application: Specially test the impact resistance and penetration resistance of the safety helmet, set the aluminum head model wearing the safety helmet on the high-sensitivity force sensor, and then use a steel hammer with a mass of 5kg to impact from a height of 1m, and measure the force value at the moment of impact by the high-sensitivity force sensor device, so as to judge the impact absorption

UL790 Roofing Material, Fire Resistance Performance, Flame Retardant Performance Testing Equipment for Photovoltaic Cells Standards: UL 1730: Smoke detector monitors for self-contained living units in multifamily dwellings and hotel/motel rooms: motorized annunciators detect residential soot conditions; UL 790: Standard Test Method for Fire Testing of Roof Coverings; IEC 61730-2 Photovoltaic Modules Appendix A Fire Test Flame propagation; ASTM F 108 - 04 : Standard Test

DX8315 Aging Testing Equipment, Industrial Oven, Thermal Aging Testing Chamber' Scope of application: It is mainly applicable to the change characteristics of leather, plastic, rubber, cloth and other materials before and after heating. Observe the yellowing resistance, glue opening, shrinkage, elongation, residual rate and other properties of the test sample before and after aging, so as to determine its aging characteristics to assist epoxy powder spray coating, which has

UL790 Roofing Material, Fire Resistance Performance, Flame Retardant Performance Testing Equipment for Photovoltaic Cells Standards: UL 1730: Smoke detector monitors for self-contained living units in multifamily dwellings and hotel/motel rooms: motorized annunciators detect residential soot conditions; UL 790: Standard Test Method for Fire Testing of Roof Coverings; IEC 61730-2 Photovoltaic Modules Appendix A Fire Test Flame propagation; ASTM F 108 - 04 : Standard Test

DX9028 Safety Helmet Impact Penetration Resistance Testing Equipment Scope of application: Specially test the impact resistance and penetration resistance of the safety helmet, set the aluminum head model wearing the safety helmet on the high-sensitivity force sensor, and then use a steel hammer with a mass of 5kg to impact from a height of 1m, and measure the force value at the moment of impact by the high-sensitivity force sensor device, so as to judge the impact absorption

DX9027 Fire Extinguisher Vibration Testing Equipment Scope of application: Mainly suitable for vibration test of 1kg~8kg portable fire extinguisher. Conform to the standard: meet the design requirements of 7.1.4 spray performance test after the collision of the fire extinguisher in GB/T 4351.1-2005 "Performance and Structural Requirements for Portable Fire Extinguishers Part 1". Test method: After weighing the dry powder fire extinguisher, place it in a 20℃±5℃ environmental

DX8890 Aircraft Seat Pad Oil Combustion Testing Equipment Scope of application: It is suitable for the study of measuring the fire in the cabin after a simulated aircraft crash, limiting the flame propagation by limiting the charred length of the seat cushion, and limiting the heat release and smoke release of the seat by limiting the combustion weight loss rate of the seat cushion. It is also used to evaluate the smoke performance of seat cushions under specified conditions.

DX8683 Building Curtain Wall Anti - wind Debris Testing Equipment 【Executive Standards】 GBT29738-2013 "Classification and Testing Methods for the Impact Resistance of Wind and Debris of Building Curtain Walls, Doors and Windows" 【Product Overview】 This device is a performance testing equipment designed and developed in accordance with the new standard "Classification and Detection Method of Wind and Debris Impact Resistance of Building Curtain Walls and Doors and Windows"

DX8602 Plastic Spot Temperature Testing Equipment Overview: DX8602 ignition temperature tester is designed and manufactured in accordance with GB4610-2008 "Determination of Ignition Temperature of Plastic Hot Air Furnace Method" and GB/T9343-2008 "Test Method for Combustion Performance of Plastics - Determination of Flash Ignition Temperature and Spontaneous Ignition Temperature", which fully conforms to GB4610-2008 and meets the standard requirements of ISO871-2006, and is

Rubber and plastic rolling wear tester (TABER abrasion tester) This machine conforms to GB5478, DIN-53754, TAPPI-T476 It is suitable for the rolling wear performance of plastic plates and sheet specimens, as well as cloth, paper, coatings, plywood, leather, floor tiles, glass, natural plastics, etc. The test method is that the rotating specimen is subjected to a pair of abrasion wheels, and the specified load is applied, and the abrasion wheels are driven when the specimen

DX8785 Roofing system wind resistance testing machine, roof wind resistance testing equipment 【Test items】Static roof wind resistance test, dynamic roof wind resistance test, metal roof wind resistance lifting test, metal roof physical properties. 【Applicable Standards】 GB/T 31543 "Test Method for Wind Resistance of Single-layer Membrane Roof System", JGJ 255 "Technical Specification for Lighting Roof and Metal Roof", GB50896 "Technical Specification for the Application

DX8785 Roofing system wind resistance testing machine, roof wind resistance testing equipment【Test items】Static roof wind resistance test, dynamic roof wind resistance test, metal roof wind resistance lifting test, metal roof physical properties.【Applicable Standards】GB/T 31543 "Test Method for Wind Resistance of Single-layer Membrane Roof System", JGJ 255 "Technical Specification for Lighting Roof and Metal Roof", GB50896 "Technical Specification for the Application of

DX8493 Xenon arc lamp aging test chamber 1. Application industry: Suitable for plastics, rubber, paints, coatings, inks, paper, medicines, food, cosmetics, textiles, auto parts, packaging materials, building materials, electrical products, etc.; It provides corresponding environmental simulation and accelerated tests for scientific research, product development and quality control, and provides an important test basis. 2. Compliance standards This product conforms to GB

Rolling abrasion testing machine 1. Main uses: Rolling wear testing machine is mainly used for surface wear resistance test of wood flooring and other non-metals. It can meet the requirements of the GB17657 "Test Method for Physical and Chemical Properties of Wood-based Panels and Veneer Wood-based Panels", and is an ideal testing equipment for quality inspection departments and production enterprises at all levels of wood-based panels. 2. Main technical specifications: 1.

Rubber and plastic rolling wear tester (TABER abrasion tester) This machine conforms to GB5478, DIN-53754, TAPPI-T476 It is suitable for the rolling wear performance of plastic plates and sheet specimens, as well as cloth, paper, coatings, plywood, leather, floor tiles, glass, natural plastics, etc. The test method is that the rotating specimen is subjected to a pair of abrasion wheels, and the specified load is applied, and the abrasion wheels are driven when the specimen