Plastic Testing Equipment

DX8468 Thermal shock testing machine It is used in electronics, auto parts, plastics and other industries to test the repeated impact tests of various materials on high and low temperatures Chemical changes or physical damage caused by the expansion and contraction of the product. The equipment is divided into three parts: high temperature area, low temperature area and test area, with a unique heat insulation structure and cold storage effect, which is to be tested during

DX8425 Plastic Load Deformation Testing Machine Scope of application: It is mainly suitable for rigid plastics connected by rivets, bolts or similar connections, to determine their ability to withstand compression over time without yielding or loosening; Applies to non-rigid plastics to determine their ability to deform and return to their original dimensions over time. Standards: Meets the requirements of the ASTM D621 Test Standard for Testing Deformation of Plastic Loads.

DX-8368 Plastic Smoke Density Testing Machine Plastic combustion smoke density tester is a new type of testing equipment for measuring smoke density developed according to the technical conditions specified in the standard GB/8323.2-2008 and ISO5659-2 "Plastic Smoke Generation Part 2 Test Method for Determining Smoke Density by Single Chamber Method", these standards are suitable for determining the specific optical density of smoke produced when plastic is burned, and the

DX8352 Leakage Tracking Tester 1. Scope of application: The tracking tester is to apply a certain voltage and drop a polluted liquid (0.1%NH4 CL) with a specified droplet volume (0.1%NH4 CL) at a fixed ×height (35mm) at a fixed height (35mm) on the surface of a solid insulating material on the surface of a solid insulating material, and to determine its relative tracking index (CTI) and tracking resistance index (PTI). It is suitable for the research, production and quality

Constant temperature and humidity test chamber 80L -60°C ~ 150°C technical specifications Meet the standards: The performance indicators meet the requirements of GB5170, 2, 3, 5, 6-95 "Basic Parameter Verification Method for Environmental Testing Equipment for Electrical and Electronic Products: Low Temperature, High Temperature, Constant Damp Heat, Alternating Damp Heat Test Equipment". Basic Environmental Test Regulations for Electrical and Electronic Products Test A: Low

DX8488 Insulation Material Volume Resistance (Surface Resistance) Tester Volume resistance/surface resistance test electrode (1) Back electrode (2) Inner electrode (3) Circular outer electrode (4) Tested sample Suitable for measuring the insulation resistance of high resistance insulation materials, electrical products, various components, rubber and plastic used in wires and cables. The optional electrode box can measure the surface resistance and volume resistance of

DX8413 Arc resistance testing machine Mainly applicable to: GB/T1411-2002 Test of resistance to high voltage and low current arc discharge of dry solid insulation materials. Compliance with standards: This tester is designed and manufactured in accordance with GB1411, IPC650, IEC 61621, ASTMD495, and complies with testing methods such as JEC 149 and UL 746A. Scope of application: The assessment of arc resistance performance of electrical insulation materials such as plastics,

DX8388 Solid insulation material electrical strength testing machine (electrical dielectric strength tester) Compliant with standards: Complies with the requirements of GB1408.1, IEC60243-1 "Test Methods for Electrical Strength of Solid Insulation Materials - Tests at Power Frequency", GB1408.2, IEC60243-2 "Test Methods for Electrical Strength of Solid Insulation Materials - Corresponding DC Voltage Test" GB/T1695-2005 "Determination of Power Frequency Breakdown Voltage

DX8379 Vertical and horizontal combustion testing machines for plastics and plastic components Applicable scope: Mainly used to determine the non combustible performance of plastics or films under direct combustion from a specified fire source to determine their fire resistance rating. Compliant with standards: Meets the requirements of UL94 and GB/T2408 test standards. GBT5169.1 Combustion chamber: The box body is larger than 1 cubic meter and is processed and formed using

DX8368 Plastic smoke density testing machine 1, Compliant with standards: Meet the requirements of GB8323.2-2008 "Plastics Smoke Generation Part 2: Single Chamber Method for Determining Smoke Density" and ISO5659.2-2006 "Plastics Smoke Generation Part 2: Single Chamber Method for Determining Optical Density" test standards. 2, Scope of application: Suitable for measuring the specific optical density of smoke generated during plastic combustion, and taking the maximum specific

DX8468 Thermal shock testing machine It is used in electronics, auto parts, plastics and other industries to test the repeated impact tests of various materials on high and low temperatures Chemical changes or physical damage caused by the expansion and contraction of the product. The equipment is divided into three parts: high temperature area, low temperature area and test area, with a unique heat insulation structure and cold storage effect, which is to be tested during

DX8425 Plastic Load Deformation Testing Machine Scope of application: It is mainly suitable for rigid plastics connected by rivets, bolts or similar connections, to determine their ability to withstand compression over time without yielding or loosening; Applies to non-rigid plastics to determine their ability to deform and return to their original dimensions over time. Standards: Meets the requirements of the ASTM D621 Test Standard for Testing Deformation of Plastic Loads.

DX-8368 Plastic Smoke Density Tester Plastic combustion smoke density tester is a new type of testing equipment for measuring smoke density developed according to the technical conditions specified in the standard GB/8323.2-2008 and ISO5659-2 "Plastic Smoke Generation Part 2 Test Method for Determining Smoke Density by Single Chamber Method", these standards are suitable for determining the specific optical density of smoke produced when plastic is burned, and the maximum

DX8352 Leakage Tracking Tester 1. Scope of application: The tracking tester is to apply a certain voltage and drop a polluted liquid (0.1%NH4 CL) with a specified droplet volume (0.1%NH4 CL) at a fixed ×height (35mm) at a fixed height (35mm) on the surface of a solid insulating material on the surface of a solid insulating material, and to determine its relative tracking index (CTI) and tracking resistance index (PTI). It is suitable for the research, production and quality

Constant temperature and humidity test chamber 80L -60°C ~ 150°C technical specifications Meet the standards: The performance indicators meet the requirements of GB5170, 2, 3, 5, 6-95 "Basic Parameter Verification Method for Environmental Testing Equipment for Electrical and Electronic Products: Low Temperature, High Temperature, Constant Damp Heat, Alternating Damp Heat Test Equipment". Basic Environmental Test Regulations for Electrical and Electronic Products Test A: Low

ISO 8142:1990 The Maximum Use Temperature of Thermal Insulation Testing Machine ASTM c411-82 ( In stock in the workshop) Application: Applicable to the assessment of maximum service temperature of heat insulation products such as loosely packed adiabatic materials, blankets, blankets, blocks, plates and prefabricated adiabatic tube shells. Standard: GB/T17430-1998 ASTM C411-82 ASTM C447-85 ISO 8142 Main technical parameters: 1. Heating plate: made of SUS304 stainless steel,

ASTM C411-82 The Maximum Use Temperature of Thermal Insulation Testing Machine Application: Applicable to the assessment of maximum service temperature of heat insulation products such as loosely packed adiabatic materials, blankets, blankets, blocks, plates and prefabricated adiabatic tube shells. Standard: GB/T17430-1998: the evaluation methods of thermal insulation materials the highest use temperature ASTM C411-82: high temperature heat insulation performance test method

ASTM C411-82 Hot-Surface Performance of High- Temperature Thermal Insulation Testing Machine The Maximum Use Temperature of Thermal Insulation Testing Machine Application: Applicable to the assessment of maximum service temperature of heat insulation products such as loosely packed adiabatic materials, blankets, blankets, blocks, plates and prefabricated adiabatic tube shells. Standard: GB/T17430-1998: the evaluation methods of thermal insulation materials the highest use

Dx8388 Electrical Strength Test Machine for Solid Insulating Materials Summary: The dielectric breakdown voltage of an insulating liquid is of importance as a measure of the liquid's ability to withstand electric stress without failure. It is used for voltage breakdown and electrical strength test of high insulating oil, insulating silicone oil and fluid-like insulating medium to evaluate the electrical performance of insulating materials. Standards: DL/T846.7-2004,IS6792

DX8602 plastic ignition temperature tester Introduction: DX8602 ignition temperature tester is designed and manufactured in accordance with GB4610-2008 "Determination of ignition temperature by plastic hot air furnace method" and GB/T9343-2008 "Determination of flash ignition temperature and self ignition temperature for plastic combustion performance test methods". It fully complies with GB4610-2008 and also meets the requirements of ISO871-2006 standard, and is used to