Stainless Steel Tube

EN 10216-2 Stainless seamless steel tube W.-nr. 1.4922 ( DIN X20CrMoV12-1, X20CrMoV11-1 ) “12 Chrome Molybdenum Vanadium” steels are a series of martensitic stainless steels designed for use at moderately high temperatures. 1.4922 is a typical grade in this series. The dominant application is steam power generating plant. This grade combines the following characteristics Moderate strength – 800 MPa UTS, 600 MPa 0.2% PS at room temperature Moderate high temperature strength –

EN 10216 Material 1.4922 DIN X20CrMoV11-1 Seamless Stainless Steel Pipe ( Tube ) Creep resisting stainless steel EN 1.4922, DIN X20CrMoV11-1, applied in the boiler tubes industry. seamless steels tubes for pressure purposes, EN 10216-2 standard Chemical composition ( weight % ) Grade C Si Mn P S Cr Ni Mo V 1.4922 0.17~0.23 0.15~0.50 1.00 max 0.025 max 0.010 max 10.00~12.50 0.30~0.80 0.80~1.20 0.25~0.35 Form of supply EN 1.4922 DIN X20CrMoV11-1 stainless seamless steel tube,

Material 1.4724 Stainless steel (heat-resistant steel grade), a truly stainless high temperature grade with 13% chromium. It is not critical in terms of embrittlement. Due to its lower chromium content, stainless 1.4724 is not as resistant to high temperature oxidation as1.4742. DIN 1.4742 shows better scaling resistance than DIN 1.4724 and can be subjected to reducing sulphur environments without risk. It is

UNS S41500 , EN 1.4313 , DIN X3CrNiMo13-4 Seamless Stainless Steel Tube UNS S41500, EN 1.4313, DIN X3CrNiMo13-4, F6NM is a low–carbon martensitic stainless steel with basic corrosion resistance, good strength, good toughness and much better weldability than most martensitic grades of stainless steel. This grade combines the following characteristics: Basic pitting and crevice corrosion resistance Moderate sulphide stress cracking resistance Good yield strength (520 to 800 MPa

Stainless Steel Capillary tubes / Precision Tubes AISI 304 316 Stainless Steel Capillary Tube with small bore sizes and precise wall thickness, available as per the requirements of the end user. The inside surface of the Capillary Tube is free from oil, Grease and other particles. Ensures even flow of liquids and gases from the sensor to the measuring instrumentation. Grade available AISI 304, 304L, 316, 316L, 310S The Stainless Steel Capillary Tubes that we bring forth in

The heat-resistant ferritic stainless steel 1.4742 in mainly used in ignition tubes, annealing pots. Our product range in 1.4742 are stainless tubes and pipes, round bars. DIN EN 10095 standard Stainless Steel grade EN 1.4742 - AISI 442 - UNS S44200 - Sicromal 10 - DIN X10CrAlSi18 Grade C Si Mn P S Cr Al 1.4742 0.12 max 0.70~1.40 1.00 max 0.040 max 0.015 max 17.0~19.0 0.7~1.2 Characteristics: resistant to

Stainless Steel TP420 Seamless Pipes And Tubes ASTM A268/A268M We provide stainless Steel seamless pipe and tube TP410, TP410S, TP420, TP430, TP409, TP446, TP446-1, TP446-2, S44660, 1.4713, X10CrAlSi7, 1.4724, X10CrAlSi13, 1.4742, X10CrAlSi18, 1.4749, X18CrN28, 1.4762, X10CrAlSi25 Product seamless stainless steel tubes / pipes Material Grade TP410, TP410S, TP420, TP430, TP409, TP446, TP446-1, TP446-2, S44660, 1.4057, X17CrNi16-2, 1.4923, X22CrMoV12-1, 1.4922, X20CrMoV11-1, 1

ASTM A268, TP410, UNS S41000, EN 1.4006, DIN X12Cr13 stainless seamless steel tube Hardenable martensitic stainless alloy used for highly stressed parts needing good corrosion resistance and strength. 410 stainless can be heat-treated to obtain high-strength properties with good ductility. Chemical composition ( weight % ) Grade C Si Mn P S Cr TP410, UNS S41000 0.15 max 1.00 max 1.00 max 0.040 max 0.030 max 11.5~13.5 Typical mechanical properities Tensile strength Yield

17-4PH AISI 630 Stainless Steel Seamless Tubes ( Pipes ) 17-4 PH, AISI 630, EN 1.4542, DIN X5CrNiCuNb16-4 is a martensitic precipitation-hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C), good toughness in both base metal and welds, and shorttime, low-temperature heat treatments that minimize warpage and scaling. This versatile material is widely used

ASTM A268 TP420 SUS420J1 , SUS420J2 Seamless Stainless Steel Tube / Pipe Standard specification ASTM A 268/A 268M standard for seamless and welded ferritic and martensitic stainless steel tubing Stainless ferritic and martensitic steel grades TP405, TP410, TP429, TP430, TP420, TP431, TP440C, TP443, TP446-1 and TP446-2, TP409, TP439, S41500 ( 1.4313, X3CrNiMo13-4 ), TP430 Ti, TP XM-27, TP XM-33, TP468, 18Cr-2Mo ( UNS S44400 ), 29-4 ( UNS S44700 ), 26-4-2 ( UNS S44800 ), 26-3-3

ASTM A268 / ASME SA268 Stainless Steel TP410 TP420 TP430 TP439 TP446 Seamless Tube 400 series stainless steels FERRITIC STAINLESS STEELS This group of ferritic stainless steels (400 series) contain 10.5% to > 30% chromium for corrosion scaling at elevated temperatures and resistance. They are non-hardenable by heat treating, and always magnetic. Ferritic stainless steel is used in applications where resistance to corrosion and oxidation is important. The lower chromium (11%)

Type 444 is a low carbon, low nitrogen, ferritic stainless steel that provides pitting and crevice corrosion resistance superior to most ferritic stainless steels. Applications requiring superior corrosion resistance and resistance to chloride stress corrosion cracking are ideal for this alloy. Standard AISI, ASTM EN, DIN JIS GB 444, S44400 1.4521, X2CrMoTi18-2 SUS444 00Cr18Mo2 Chemical composition wt% Grade C

X8CrTi25 / H25T / GOST 15Ch25T - 15Х25Т is one of the better heat-resistant ferritic grades of steel with the addition of Titanium intended for operation at high temperatures, gas and flue gas environments up to 1000 ℃ right next to. Usually supplied in the form of sheets, pipes and bars, it works best when working without significant loads and with a limited number of welded joints. The prototype

AISI 446 EN 1.4762 DIN X10CrAl24 Stainless Steel Seamless Tubes​ Ferritic stainless steel, heat resisting grade GOST grade 15X25T ( 15H25T ), highest scale resistance of 1200 °C. Very good resistance to oxidising sour gases, low resistance to oxygen weak, nitrogen containing gases. Temperature limit for continuous operation: 1000 °C. Application: furnace parts, equipment, annealing boxes, components with low mechanical load. Equivalent Materials GOST EN/DIN JIS AISI GB 15X25T

AISI 446 UNS S44600 TP446-1 TP446-2 Stainless Steel Seamless Tubes The grade 446 stainless steel is a ferritic, non-heat treatable stainless steel that provides good resistance to high temperature oxidation and corrosion. DIN 1.4762 - with the highest chromium content- is the most resistant to reducing sulphurous gases. It is susceptible to the same embrittlement phenomena as 1.4742 whilst σ-phase forms during long exposures in the range 600°C to 800°C. High temperature

ASTM A268/A268M TP430 Stainless Steel Seamless Tubes / Pipes Standard specification for seamless and welded ferritic and martensitic Stainless steel tubing for general service ASTM A268/A268M Grade: TP405/TP410/TP429/TP430/TP443/TP446-1/TP446-2/TP409/TP439/TP430Ti/TP XM-33/TP468/ S40500/S41000/S42900/S43000/S44300/S44600/S40800/S40900/S43035/S41500/S43036/S44627/S44626 /S44400/S44700/S44800/S44660/S44635/S44735/S32803/S40977/S43940/S42035/S46800 Manufacture Process: Seamless

Stainless Steel Seamless Tubes / Pipes TP410 ASTM A268 SMLS ASTM A268 TP410 Seamless Stainless Tube, UNS S41000 Seamless Tube ASTM A268 ASME SA 268 TP410 S41000 is a martensitic stainless steel with high mechanical properties and is ferromagnetic in the annealed or hardened condition. It resists abrasion and wear better than most 300 series stainless steel. Grade C Cr 410 0.15 max 11.5~13.5 Stainless alloy 410 is the basic, general purpose, hardenable martensitic stainless

Cold Rolled Seamless Boiler Tube EN 10216-2 Material 1.4922, X20CrMoV11-1 BS EN 10216-2: 2013 Seamless steel tubes for pressure purposes-technical delivery conditions part 2 non alloy and alloy steel tubes with specified elevated temperature properities material 1.4922, X20CrMoV11-1, high-temperature stainless martensitic resisting steels and alloys C Si Mn P S Cr Ni Mo V 0.17~0.23 0.15~0.50 1.00 0.025 0.020 10.0~12.5 0.3~0.8 0.8~1.2 0.25~0.35 We also produce 1.4922,

ASTM A268 Cold Rolled Stainless Steel Tube/Pipe Grades TP446-1/TP446-2 High temperature oxidation corrosion in air,good resistance to reducing sulphurous gases. Resistance to molten copper, lead and tin. Recuperator tubes, utilized at temperature 1100℃ for TP446-1, and 1075℃ for TP446-2 ASTM A268/A268M standard, TP446-1/TP446-2 stainless steel seamless tube/pipe Grade EN/DIN C Si Mn P S Cr Ni N TP446-1 1.4749 X18CrN28 0.20 1.00 1.50 0.040 0.030 23.00~27.00 0.75 0.25 TP446-2 1

EN 10216-2 W.-nr. 1.4922 DIN X20CrMoV11-1 Stainless Steel Seamless Tubes BS EN 10216-2 seamless steel tubes for pressure purposes part 2 non-alloy and alloy steel tubes with specified elevated temperature properities W.-nr. 1.4922 DIN X20CrMoV11-1, martensitic stainless, creep resisting steel Chemical composition % C Si Mn P S Cr Ni Mo V 0.17~0.23 0.15~0.50 1.00 0.025 0.010 10.0~12.5 0.3~0.8 0.8~1.2 0.25~0.35 Heat treatment Austenitizing Temperature Cooling medium Tempering