Specialty Alloys

Inconel alloy 625 Cold Rolled Steel Strip In Coil UNS N06625 Inconel 625 is a Nickel-Chromium-Molybdenum-Columbium (Niobium) alloy with excellent oxidation resistance, corrosion resistance, and strength at high temperatures. Age-hardening treatments are not required to obtain the high strength properties of Alloy 625 due to the solid solution effects of molybdenum and columbium on the nickelchromium matrix. Alloy 625 is resistant to chloride-ion stress-corrosion cracking,

ASTM B637 Nickel Alloy Bars UNS N07718 N07080 N09925 Standard ASTM B637-2016 precipitation hardening and cold worked nickel alloy bars, forgings, and forging stock for moderate or high temperature service covers hot and cold worked nickel alloy rod, bar, forgings. UNS Type N07022 N07208 N07252 N07001 N07500 N07440 N07750 N07718 Inconel 718 N07080 80A N07752 N09925 N07725 Form of supply Nickel alloy rods, bars condition: solution annealed, cold worked, or precipitation

ASTM B424 N08825 Alloy Plate, Sheet, Strip, Coil Standard ASTM B424 Nickel iron chromium molybdenum copper alloys plate, sheet and strip it covers alloy UNS N06845, N08221, N08825, N08827 UNS N08825 Nickel Chromium Iron Mn C Cu Si S Al Ti Mo 38.0-46.0 19.5-23.5 22.0 min. 1.00 0.05 1.5-3.0 0.50 0.030 0.20 0.6-1.2 2.5-3.5

EN 10302 Creep Resisting Steels, Nickel and Cobalt Alloys Sheet, Strip, Wire, Bar European standard EN 10302 Creep resisting steels, nickel and cobalt alloys creep resisting materials, steels, nickel or cobalt alloys with a min. of 8% chromium, which are characterised by good mechanical behaviour at temperatures above 500℃ under long range service conditions. Materials covered in this EN 10302 standard are classified according to their structure into martensitic steels

EN 10095 Heat Resisting Steels and Nickel Alloys Steel Plate, Strip, Bars and Rods British standard BS EN 10095 Heat resisting steels and nickel alloys covers the grades of wrought steels and nickel alloys, which are usually employed for products, for which the main requirement is their resistance to the effects of hot gases and products of combustion at temperatures above 550℃. EN 10095 specifies the technical delivery conditions of semi finished products, for hot and cold

Nickel Alloy Nimonic 90 UNS N07090 2.4632 Round Bar NIMONIC alloy 90 ( UNS N07090, EN 2.4632, 2.4969 ) is a wrought nickel-chromium-cobalt base alloy strengthened by additions of titanium and aluminum. It has been developed as an age-hardenable creep resisting alloy for service at temperatures up to 920°C Material NIMONIC 90 offers the following key features: High stress rupture strength and high creep resistance at high temperatures Good resistance to high-temperature

Inconel Alloy 718 EN 2.4668 UNS N07718 Round Bars INCONEL Alloy 718 is an age-hardenable Nickel-Chromium-Columbium (Niobium)-Molybdenum alloy with high strength, corrosion-resistance, and good fabrication characteristics. INCONEL Alloy 718 has high tensile, yield, and creep-rupture properties at high temperatures up to 1200°F (650°C). INCONEL alloy 718 combines properties that make it suitable for a variety of fabricated component applications in both aircraft turbine engines

Inconel Alloy 718 EN 2.4668 UNS N07718 Stainless Steel Bar, Wire, Rod INCONEL Alloy 718 is an age-hardenable Nickel-Chromium-Columbium (Niobium)-Molybdenum alloy with high strength, corrosion-resistance, and good fabrication characteristics. INCONEL Alloy 718 has high tensile, yield, and creep-rupture properties at high temperatures up to 1200°F (650°C). INCONEL alloy 718 combines properties that make it suitable for a variety of fabricated component applications in both

Inconel X-750 Alloy UNS N07750 EN 2.4669 Wire, Round Bar, Strip, Sheet Material Inconel X-750, UNS N07750 is a precipitation hardenable nickel-chromium-iron alloy containing titanium, niobium and aluminium, exhibiting good corrosion resistance at high and low temperature and high strength up to 820 °C (1500 °F). Incone X-750 alloy is characterized by: ● high tensile strength up to 600 °C (1100 °F) ● high creep and rupture strength up to 820 °C (1500 °F) ● high oxidation

SUH660 A286 UNS S66286 1.4980 Cold Heading Stainless Steel Wire Material SUH660, UNS S66286, Incoloy A-286, EN 1.4980, DIN X6NiCrTiMoVB25-15-2 Heat resistant bolting material, expansion coefficient comparable to Austenitic Stainless Steels. for use in high temperature service for bolting components, such as bolts, screws, nuts, studs. The material 1.4980 ( 660 ) is an iron-nickel-chromium alloy. The additional alloy elements aluminum and titanium allow this material to

Grade Alloy 660 A286 UNS S66286 DIN 1.4980 Cold Drawn Stainless Steel Wire, Bar Material AISI 660, UNS S66286, Incoloy A-286, EN 1.4980, DIN X6NiCrTiMoVB25-15-2 High temperature bolting material, expansion coefficient comparable to Austenitic Stainless Steels. The material 1.4980 ( 660 ) is an iron-nickel-chromium alloy. The additional alloy elements aluminum and titanium allow this material to undergo precipitation hardening (aging) through the formation of intermetallic

Nimonic 90 Nickel Alloy Round Bar UNS N07090 2.4632 Wire NIMONIC alloy 90 ( UNS N07090, EN 2.4632, 2.4969 ) is a wrought nickel-chromium-cobalt base alloy strengthened by additions of titanium and aluminum. It has been developed as an age-hardenable creep resisting alloy for service at temperatures up to 920°C Material NIMONIC 90 offers the following key features: High stress rupture strength and high creep resistance at high temperatures Good resistance to high-temperature

Nickel Alloy C276 Inconel C276 Hastelloy C276 UNS N10276 Round Bar Inconel C276, UNS N10276, EN 2.4819nickel-molybdenum-chromium alloy with an addition of tungsten having excellent corrosionresistance in a wide range of severe environments.The high molybdenum content makes the alloy especially resistant to pitting and crevice corrosion.The low carbon content minimizes carbide precipitation during welding to maintain corrosionresistance in as-welded structures.Used in

ERNiCrMo-3 Nickel Welding Wire Inconel 625 Alloy Wire Inconel alloy 625, UNS N06625 nickel-chromium-molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloy's matrix and thereby provide high strength without a strengthening heat treatment. The alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Used in chemical processing, aerospace and marine engineering, pollutionc

Incoloy Alloy 800 Cold Rolled Steel Strip UNS N08800 EN 1.4876 INCOLOY alloy 800 ( UNS N08800, W. Nr. 1.4876) is a widely used material for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C). Alloy 800 offers general corrosion resistance to many aqueous media and, by virtue of its content of nickel, resists stress corrosion cracking. At elevated temperatures it offers resistance to oxidation,

Nickel Alloy Wire SUH660 A286 UNS S66286 1.4980 A precipitation hardening stainless steel SUH 660, UNS S66286, A286, 1.4980, X6NiCrTiMoVB25-15-2maintains superior strength at high temperatures up to 700℃, surpassing austenitic stainless steels.With a higher nickel content than Type 304, A286 also includes such elements as titanium and aluminum for hardening.Age hardening is used to precipitate γ' phase [Ni3 (Al, Ti)] making this an extraordinarily strong metal at high

ERNiCrMo-3 Inconel 625 UNS N06625 Alloy Welding Wire The Ni-Cr-Mo alloy system provides excellent resistance to oxidizing and reducing environments, with the high molybdenum content providing good stress, pitting and crevice corrosion resistance. Features Designed to match the composition and properties of Nickel Alloy 625 The Ni-Cr-Mo alloy system provides excellent resistance to oxidizing and reducing environments The high molybdenum content provides good stress, pitting

UNS N07080 DIN 2.4952 Nickel Alloy Wires, Round Bars UNS N07080, 80A is a nickel-base, high-temperature specialty alloy containing a high percentage of chromium characterized by excellent creep-resisting properties, high oxidation resistance, and high resistance to fatigue under very arduous conditions. Aluminum and titanium additions serve as hardening agents. Material N07080 is heat treatable using gamma-prime precipitation. The creep-resisting properties of 80A are

High Temperature Specialty Alloy 718 Nickel Alloy UNS N07718 Plate, Sheet And Strip Inconel 718 UNS N07718 DIN 2.4668 is a precipitation hardenable nickel-base alloy designed to display exceptionally high yield, tensile, and creep-rupture properties at temperatures up to 1300°F (704°C). It is resistant chlorides, stress corrosion, and sulfide stress cracking and the sluggish age-hardening response of 718 permits annealing and welding without spontaneous hardening during

INCONEL Alloy 625 UNS N06625 Strip, Coil, Sheets ASTM B443 AMS 5599 INCONEL Alloy 625, UNS N06625, W.Nr. 2.4856 Nickel-Chromium-Molybdenum-Columbium (Niobium) alloy with excellent oxidation resistance, corrosion resistance, and strength at high temperatures. Age-hardening treatments are not required to obtain the high strength properties of INCONEL Alloy 625 due to the solid solution effects of molybdenum and columbium on the nickel-chromium matrix. INCONEL Alloy 625 is