Bare Aluminum Conductor

Product Overview Zhenglan Cable Technology Co., Ltd. supplies AAC (All Aluminium Conductor) bare stranded conductors for overhead power transmission and distribution lines. AAC is a concentric-stranded conductor made entirely of high-purity aluminum wires, combining light weight with good conductivity and corrosion resistance. Rated for overhead line service, it is widely used on distribution spurs, suburban networks and short-to-medium span transmission where mechanical

All Aluminum Alloy Overhead AAAC Conductor for Primary and Secondary Distribution ASTM B399 IEC 61089 description The All Aluminum Alloy Conductor (AAAC) is a premium overhead bare conductor d esigned as a superior alternative to traditional ACSR and AAC conductors . AAAC offers an outstanding combination of high tensile strength, excellent corrosion resistance, and a favorable strength-to-weight ratio. This conductor is particularly well-suited for coastal areas, industrial

Aluminum alloy stranded wire is the core conductor type for 110kV and above voltage level transmission lines, suitable for long-distance, large-span power transmission. In upgrading aging lines, medium- and high-strength aluminum alloy stranded wire can achieve capacity increases without replacing towers, and is widely used in urban power grid expansion. Due to its excellent creep resistance and low-temperature toughness, it is particularly suitable for power transmission

Applications AAAC Aluminum Alloy Conductor is Used as bare overhead conductor for primary and secondary distribution. Designed utilizing a high-strength aluminum alloy to achieve a high strength-to-weight ratio; affords better sag characteristics. Aluminum alloy gives higher resistance to corrosion than ACSR. Specification Physical contents of aluminum alloy :- 1. Resistivity – 0.0326 Ohms mm2/m at 20°C 2. Density – 2.70 kgm/dm3 at 20°C 3. Coefficient of Linear Expansion – 23

AAAC (All Aluminum Alloy Conductor) Yew Conductor referred to have higher strength but lower conductivity than pure aluminum. Being lighter, alloy conductors can sometimes be used to advantage in place of the more conventional ACSR; Having lower breaking loads than the latter, their use becomes particularly favorable when ice and win loadings are low. Applications: AAAC (All Aluminum Alloy Conductors ) Yew Conductor made up of heat treated alloy of aluminum, magnesium and

Bare ACAR Conductor - Aluminum Conductor Aluminum Alloy Reinforced 250MCM Aluminum alloy core stranded wire is an energy-saving conductor used in overhead transmission lines. Its core is made of high-strength aluminum alloy material, with externally stranded electrical round aluminum wire, combining excellent conductivity with superior mechanical strength. Key Features and Advantages Energy Saving and Consumption Reduction: Aluminum alloy core replaces low-conductivity steel

Bare aluminum alloy conductor 1165MCM 590mm2(61/3.51mm) ASTM B399/399M Description AAAC conductor are made of 6201-T81 aluminum alloy, conforming to ASTM Specification B-399. They are suitable for use in spans on wood poles, transmission towers, and other structures where AAC conductors do not provide the required strength and ACSR conductors are not required or suitable. Electrical Properties Resistivity at 20 °C, maximum (nΩ • m): 32.84 Density@20oC: 2.703 kg/dm Temperature

ACSR MINK 63-AL1/11-ST1A Overhead aluminum conductor seel reinforced ACSR are made of aluminum 1350-H19 wires concentrically stranded over a Class A Zinc coated steel wire core. Reference standard BS EN 50182:2001 Conductors for overhead lines —Round wire concentric lay stranded conductors; EN 50189 Conductors for overhead lines — Zinc coated steel wires; EN 60889 Hard-drawn aluminium wire for overhead line conductors. Features and Benefits: ACSR conductors combine the light

Product Description: The ACSR size of this product is AL-53mm2 / ST-9mm2, which means that it has an aluminum area of 53mm2 and a steel area of 9mm2. The number of strands is not specified, but this product is known for its high strength and excellent conductivity. This Bare Aluminum Conductor is ideal for use in overhead power transmission and distribution lines. It is also suitable for use in areas with high mechanical stress, such as coastal regions or mountainous areas.

Rabbit Aluminium Conductor Steel Reinforced (ACSR) Conductors 6*3.35mm+1*3.35mm BS 215-2 BS EN 50182 Construction: Aluminum Conductor Steel Reinforced (ACSR) is concentrically stranded conductor with one or more layers of hard drawn 1350-H19 aluminum wire on galvanized steel wire core. The core can be single wire or stranded depending on the size. Steel core wire is available in Class A , B or Class C galvanization for corrosion protection. Additional corrosion protection is

All Aluminum Alloy Conductors Overhead AAAC Aluminum Wire(AAC, AAAC, ACSR)IEC1089 10-1 Standard: BS 3242 BS EN 50182 IEC 61089 ASTM B 399/B 399M DIN 48201 PART 6 Construction Applications AAAC Aluminum Alloy Conductor is Used as bare overhead conductor for primary and secondary distribution. Designed utilizing a high-strength aluminum alloy to achieve a high strength-to-weight ratio; affords better sag characteristics. Aluminum alloy gives higher resistance to corrosion than

4/0 AWG OXLIP All Aluminum Conductor Overhead AAC Aluminum Wire ASTM-B230 ASTM-B231 Description OXLIP is one of a large range of standard all aluminum conductor (AAC) wires, used primarily for overhead power transmission and distribution. Its very simple composition of nearly pure stranded aluminum makes it more flexible, lighter, easier to work with, and more conductive than AAAC or ACSR alternatives. Features: Single stranded conductor is flexible and durable All aluminum

AAC Aluminium Conductor Suitable For Low & Medium Voltage ASTM B399 Standard Standard: Basic design to BS 215-1 / BS EN 50182 / IEC 61089 / ASTM B 231/B 231M / DIN 48201-5 standards Application AAC - All Aluminium Conductor AAC aerial conductor is made of aluminium 1350. It is designed for short & medium spans with a high conductivity. Note Coefficient of linear expansion 23.0 s 10-6/°C. Modulus of elasticity: a. 65 GPa for seven (7) and nineteen (19) wire conductors. b. 64

All Aluminum Bare Conductor AAC 1000 AWG Hawkweed (Total Area: 506.7mm2; 37/4.18) Standard ASTM B 231 APPLICATION Overhead Bare Conductor Wire AAC Cable Aluminum Conductor Wire Power Cable is mainly used as bare overhead transmission cable and as primary and secondary distribution cable. It is also suitable for laying across basins, rivers and valleys where special geographical teatures exist. STANDARD Basic design to BS 215-1/Din 48201/IEC61089/ ASTM B 231 standards.

Aluminium Conductor Steel Reinforced Cable For Electrical Power Transmission ACSR 192.5MCM BUNTING APPLICATION ACSR conductors are widely used for electrical power transmission over long distances, since they are ideal for long overhead lines spans. They are also used as a messenger for supporting overhead electrical cables. STANDARD Basic design to BS 215-2 / BS EN 50182 / IEC 61089 / ASTM B 232/B 232M / DIN 48204 / JIS C 3110 standards. Note: The values of current rating

Overhead Bare Conductor Wire AAAC Code 300mm2 (Nominal Area: 299.43mm2, 61/2.5) according to DIN48201 APPLICATION AAAC is mainly used as bare overhead transmission cable and as primary and secondary distribution cable. It is also suitable for laying across basins, rivers and valleys where special geographical teatures exist. Advantage 1. Corrosion Resistance: AAAC exhibits excellent corrosion resistance specially in sea coast areas and in polluted industrial areas due to

IEC 240mm2 Overhead Bare Conductor Wire AAC Cable Aluminum Conductor Wire Power Cable APPLICATION: IEC 240mm2 Overhead Bare Conductor Wire AAC Cable Aluminum Conductor Wire Power Cable is mainly used as bare overhead transmission cable and as primary and secondary distribution cable. It is also suitable for laying across basins, rivers and valleys where special geographical teatures exist. STANDARD: Basic design to BS 3242 / BS EN 50182 / IEC 61089 / ASTM B 399/B 399M /

Overhead Bare Conductor AAAC(6-1750AWG&MCM) Aluminum alloy wires (6201 T81) strandedaccording to ASTM 399 APPLICATION:AAAC is mainly used as bare overhead transmission cable and as primary and secondary distribution cable. It is also suitable for laying across basins, rivers and valleys where special geographical teatures exist. Bare Conductor Wire STANDARD Basic design to BS 3242 / BS EN 50182 / IEC 61089 / ASTM B 399/B 399M / DIN 48201 -6 standards. Bare Conductor Wire

Aluminum conductor AAC Arbutus 402.8MCM 37/3.72mm ASTMB231/231M Aluminum conductor AAC Arbutus 402.8MCM 37/3.72mm ASTMB231/231M Application: Bare aluminum conductor are made of stranded 1350 aluminum. They are classified as follows: Class AA For bare conductors usually used in overhead lines. Class A For conductors to be covered with weather-resistant materials and for bare conductors where greater flexibility is required. Compact strand conductor for use in bare overhead

AAC– All Aluminium Conductor AAC are a refined Aluminium stranded conductor with a minimum metal purity of 99.7%. It is principally used in urban areas where spacing is short and the supports are close. It can be used in coastal regions owing to its high degree of corrosion resistance and is also used extensively within the Railway and Metro industries. The stranded All Aluminium Conductor (AAC) are made up of concentric-lay-stranded aluminium wires only. The conductor may be