BMS Battery Management System LiFePO4 16 Series With Touch Screen / Can Bus
Price:
Negotiable
MOQ:
20pcs
Delivery Time:
15 days
Brand:
VICT
Product Description
Battery Management System 16 Series with Touch Screen and Can Bus
VICT Sailing Power offers a standard PCB (Protective Circuit Board) to protect up to 96V Li-ion battery packs in energy storage applications like electric scooters or portable power etc. VICT Sailing Power can also supply the advanced BMS (with touch screen, CAN BUS) for the larger, more complicated battery packs. Please consult us for assistance for your specific project.
Specification
| Series number of battery pack | 16 series |
| BMS that suit for the type of battery pack | LiFePO4 battery pack |
| Cut-off voltage in charge (Cell level) | 3.8 V ±50 mV |
| Delay time of cut-off in charge state | 1.0 seconds |
| Release volt in charge state (Cell level) | 3.6 V ±50 mV |
| Cut-off volt in discharge (Cell level) | 2.3 V ±50 mV |
| Delay time of cut-off in discharge state. | 1.0 seconds |
| 7. Release volt in discharge state. (Cell level) | 2.5 V ±50 mV |
| 8. Continuous charging current. | ≤ 120A |
| 9. Continuous discharging current. | ≤ 120A |
| 10. Peak discharging current. (≤15 sec) | ≤ 150A |
| 11. Short-circuit protection in discharge. | ≤ 215A |
| 13. Recommend working temperature | -20 ~ 60 °C |
| 14. Max weight | ≤0.5 kg |
| 15. Dimension | 170*123*22 mm |
How to replace BMS
Before replace BMS please disconnect all outside circuit (charger, load etc).
Unplug sequence:
- Pull of the two flat cables wires directly without hesitate ( first pull the single one, then the multi wires one ), which used for detecting cell volts.
- Pull of the Anderson connector which comes from the negative pole of bare battery pack to the " B- " wires of BMS.
- Pull of the Anderson connector which comes from the " P- " wires of BMS to the outside power output wire.
Plug sequence (reverse sequence of unplug):
- Connect the " B- " wires of BMS to the negative pole of bare battery pack.
- Install the cell volt detecting wires without hesitate, first install the multi wires one, and then install the single one.
- Measure the Volt1 as between P+ and P-, to see if volt1 is same to the volt2 of P+ and B-. If Yes it is no problem, if not the BMS is damaged by the wrong connection. P+ is the positive pole of whole pack.
- Connect the negative pole of output wire to the " P- " wires of BMS.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hunan Vict-Sailing Power New Energy Co.,LTD
Location
Building 10th, Kaitong International City, No.159 Chezhan Zhonglu, Zhaoyang Street Furong Dist, Changsha Hunan China
Contact Person
Candy Yan