Nickel Alloy Tube

ASTM B163 ASME SB167 N06601 Inconel 601 Nickel Alloy Seamless Tubing Description: ASTM B163 B167 ASME SB163 SB167 N06601 Inconel 601 Nickel Alloy Seamless Tubes Tubing Pipes DIN 17552 2.4851 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200° F. Alloy 601 develops a tightly adherent oxide scale

ASTM B622 Hastelloy C22 Nickel Alloy Tube Round UNS N06022 Seamless Nickel Tubing Description: Hastelloy C-22 is extremely resistant to corrosion inoxidizing and reducing environments. C-22 has shownan outstanding resistance to a wide range ofchemicals, including chlorides, organic and inorganicsolutions. Alloy 22 is nickel-base and typically contains 22% chromium, 14% molybdenum, and 3% tungsten. Iron is normally limited to less than 3%. The alloy’s high content of chromium

ASTM B163 Alloys 800/800H Seamless Nickel Alloy Pipe UNS N08800 Nickel Tubing INCOLOY alloy 800 is used in a variety of applications involving exposure to corrosive environments and high temperatures. It is used for heat-treating equipment such as baskets, trays, and fixtures. In chemical and petrochemical processing, the alloy is used for heat exchangers and other piping systems in nitric acid media especially where resistance to chloride stress-corrosion cracking is

ASTM B165 Alloy 400 UNS N04400 WNR 2.436 Nickel Alloy Seamless Pipe for heat exchanger Alloy 400 (UNS N04400) is a solid-solution alloy that can be hardened only by cold working. It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. Alloy 400 is widely used in many fields, especially marine and chemical processing. Typical applications are valves and pumps; pump and propeller shafts; marine fixtures and

ASTM B444 Alloy 625 / UNS N06625 Nickel Alloy SMLS Tube WNR 2.4856 Tubing Alloy 718 (UNS N07718, W Nr 2.4668) is an austenitic nickel-based superalloy. Alloy 718 exhibits excellent high yield tensile and creep-rupture properties at temperatures up to 1300ºF and oxidation resistance to 1800ºF. Alloy 718 is used in applications that require high strength such as parts for jet engines and high speed airframe parts such as wheels, buckets, spacers and high temperature bolts and

ASTM B444 Alloy 625 / UNS N06625 Nickel Alloy SMLS Tube WNR 2.4856 Tubing Inconel 625 is an alloy made from Nickel, Chromium and Molybdenum. Inconel metal is primarily used in various high temperature applications. The generally used trade names of these super alloys include Inconel 6020, Inconel 625, Haynes 625, Altemp 625, Chronin 625 and Monel 400. Alloy 625 is a nickel-chromium alloy used for its high strength, excellent fabricability and outstanding corrosion resistance.

ASTM B 423 INCOLOY 825 UNS N08825NICEL ALLOY STEEL SEAMLESS TUBING Incoloy 825 is a nickel-iron-chromium alloy with additions of molybdenum and copper. This nickel steel alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. It is similar to alloy 800 but has improved resistance to aqueous corrosion. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized attack such

ASTM B 407 INCOLOY 800H / 800HT UNS N08810/N08811 NICKEL ALLOY SEAMLESS TUBING ASTM Specifications Incoloy 800, 800H, and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT. Incoloy 800 was the first of these alloys and

ASTM B446 ASTM B443 Inconel 625 UNS N06625 High Temperature NICKEL ALLOY SEAMLESS TUBING Ni 58.0, Cr 21.5 Mo 9.0,Mn 0.50 C0.10 Si 0.50 Fe 5.0 High Performance Alloys stocks and produces Inconel 625 in this grade in the following forms: Bar, square bar, wire cuts, sheet, plate, tube, pipe, fastener, disk, machined, forged. Overview Inconel 625 is a material with excellent resistance to pitting, crevice and corrosion cracking. Inconel 625 is highly resistant in a wide range of

ASTM A 213/ASME SA 213 INCOLOY alloy 27 UNS S31277 NICKEL ALLOY SEAMLESS TUBING INCOLOY alloy 27-7MO (UNS S31277) is an advanced 7% molybdenum super-austenitic stainless steel offering corrosion resistance in most environments superior to 6% molybdenum super-austenitic stainless steels. In many environments alloy 27-7MO offers resistance approaching that of much more highly alloyed materials such as INCONEL alloys 625, 22, and C-276. Alloy 27-7MO products typically contain 27

ASTM B335 Hastelloy B2 UNS N10665 NICKEL ALLOY SEAMLESS TUBING Overview Hastelloy B2 is a nickel-molybdenum alloy with significant resistance to reducing environments, such as hydrogen chloride gas and sulfuric, acetic and phosphoric acids. Hastelloy B2 provides resistance to pure sulfuric acid and a number of non-oxidizing acids. The alloy should not be used in oxidizing media or where oxidizing contaminants are available in reducing media. Premature failure may occur if

ASTM B165 MONEL 400 (UNS N04400) Ni 66.5 Cu 31.5 NICKEL ALLOY SEAMLESS TUBING Monel 400 is a Nickel-Copper alloy, resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 is a nickel-copper alloy with excellent corrosion resistance in a wide variety of media. Monel 400 is characterized by good general corrosion resistance, good weldability and moderate to high strength. The alloy has been used in a variety of applications. It

ASTM B446, ASTM B443 Alloy 625 UNS N06625 NICKEL ALLOY SEAMLESS TUBING Inconel 625 is a material with excellent resistance to pitting, crevice and corrosion cracking. Inconel 625 is highly resistant in a wide range of organic and mineral acids. Good high temperature strength. Characteristics Excellent mechanical properties at both extremely low and extremely high temperatures. Outstanding resistance to pitting, crevice corrosion and intercrystalline corrosion. Almost complete

ASTM B163, ASTM B167 Alloy 600 UNSN06600/W.Nr. 2.4816 NICKEL ALLOY SEAMLESS TUBING Description: Alloy 600 seamless nickel tubing is a nickel-chromium alloy with good oxidation resistance to 2000 degree F. Good strength and resistance to general corrosion in a variety of elements. Resists stress-corrosion cracking. Typical applications: thermocouple, furnace muffles, heat exchangers Stock Size Range: OD:.250" - 1.500" Wall:.028" - .065" Specifications: AMS 5580, ASTM B163,

ASTM B468/ASME SB468 ALLOY 20 UNS N08020 NICKEL ALLOY SEAMLESS TUBING Description: Alloy 20 is a nickel-chromium-molybdenum alloy developed for applications involving sulfuric acid. Its corrosion resistance also finds other uses in the chemical, food, pharmaceutical, power generation and plastics industries. Alloy 20 nickel tubing resists pitting and chloride ion corrosion and its copper content protects it from sulfuric acid. Typical applications include tanks, piping, heat

ASTM B622 ALLOY C276 UNS N10276 SEAMLESS NICKEL Alloy TUBING Description: Alloy C276 seamless nickel tubing is a nickel-molybdenum-chromium alloy with addition of tungsten having excellent corrosion resistance in a wide range of severe environments. The high molybdenum content makes this alloy especially resistant to pitting and crevice corrosion. The low carbon content minimizes carbide precipitation during welding to maintain corrosion resistance in as-welded structures.

Alloy 690 UNS N06690 WNR 2.4642 Seamless Cold Drawn Nickel Alloy Tube and Pipe Description: Alloy 690 is a high-chromium nickel alloy having excellent resistance to many corrosive aqueous media and hightemperature atmospheres. The alloy’s high chromium content gives it excellent resistance to caturisation, metal dusting, oxidation and sulfidation at high temperature. In addition to its corrosion resistance, alloy 690 has high strength, good metallurgical stability, and

Alloy 718 UNS N07718 W.Nr. 2.4668 AMS 5589 AMS 5590 Seamless Nickel Alloy Pipe Description: Alloy 718 is a precipitation hardening nickel-chromium alloy that also contains additions of iron, niobium, molybdenum, aluminium and titanium, providing a unique combination of high strength and corrosion resistance together with excellent weldability. The alloy possesses excellent tensile, fatigue, creep and rupture strengths across a wide temperature range from around -253ºC to 705

Alloy 28 UNS N08028 W. Nr. 1.4563 ASTM B668 Seamless Nickel Alloy Pipe with MTR 3.1 EN10204 Description: (UNS N08028/W. Nr. 1.4563) is a highly alloyed austenitic stainless steel offering resistance to a variety of corrosive media. By virtue of its contents of chromium and molybdenum, the alloy offers resistance to both oxidizing and reducing acids and salts. The presence of copper increases its resistance to sulfuric acid. The alloy is used in the chemical and petrochemical

Pickled Nickel Alloy Tubes Werkstoff Nr. 1.4876 Incoloy 825 Tubing OD 6MM - 1016MM Description: Incoloy 800, 800H, and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT. Incoloy 800 was the first of these alloys and it