Stainless Steel Heat Exchanger Tube

A269 AISI 305 UNS S30500 1.4303 stainless steel tubes for heat exchanger AISI 305 UNS S30500 1.4303 stainless steel is comprised of 17% to 19% chromium, 12% carbon, 2% maximum manganese, 10% to 13% nickel with traces of phosphorus sulfur and silicon, with the balance being iron. It was designed for maximum formability, exhibiting good strength and corrosion resistance. Grade 305 has the lowest work and strain hardening rates of all the austenitic stainless steel. This low

Copper / Aluminium heat exchanger tubing ,G Type Fin Tubes AL1100 ASTM A179 OD5/8' G Type Finned Tube Spezilla offers a variety of extended surface Finned Tubes and Finned Pipe competitively priced with an unparalleled level of service, on-time finned tube delivery. Finned Tubes are manufactured to exact specifications that provide maximum service and heat transfer performance. (Embedded Fin)The fin strip is wound into a machined groove and securely locked into place by back

ASTM A268 Stainless Steel TP409L Pipes/409L SS Tubes Annealed for Heat Exchanger ASTM A268 ASME SA268 TP409 is a typical martensitic chromium-alloy steel grade. It does not have the nickel content and owns the following characteristic: - Harding by heat treatment - High hardness with good ductility - Good corrosion resistance capability - Good wear corrosion resistance - High cold-deformation property Item Code: TP409 Tube OD.: 1/4' - 2' Wall: 0.028' - 0.120' Length: 20FT

CuNi 90 /10 UNS C70600 Copper Nickel Tubing ,copper tube heat exchanger ASTM B111 90/10 Copper nickel tube (Cupro nickel 90/10 tube) is a 90% copper 10% nickel alloy, which offers excellent corrosion resistance in marine and salt-water environments. Applications for 90/10 copper nickel tube include: valves pump components, fittings, flanges and various other marine hardware components. The most popular specifications in Europe and America are C70600, CN102, Kunifer 10, NES

A179 SA179 Rolling heat exchanger u tube, Bending Stainless Steel Tubing Annealed / Oiled ASTM A179 (ASME SA179) cold drawn steel tube. This is an effective way of metal corrosion, the use of the main features are the following: 1. ASTM A179 cold drawn seamless pipe manufacturers with thick dense dense zinc layer covered in the cold drawn seamless tube surface, it can avoid cold drawn seamless tube matrix and any contact with the corrosion solution to protect the steel matrix

SA213 TP304 Stainless Steel U Bend Pipe ,stainless steel heat exchanger tubes Stainless Steel U bend Tube for Heat Exchanger Grade(UNS): Austenitic Stainless Steel: 304/304L/304H(1.4301/1.4306/1.4948); 316/316L(1.4401/1.4404); 316Ti(1.4571); 321(1.4541); 309S (1.4833); 310S(1.4845); 317L(1.4438)321H(1.4878); 347H (1.4550); Duplex Stainless Steel: S32001, S32003, S31500, 2205(1.4462); S32304,(1.4362);S31803,2507 (S32750), S32760(1.4501);S32101(1.4162); Super Austenitic

ASTM B677 TP904L Stainless Steel Seamless U Bend tube for heat exchanger ASTM B 673 / 674, ASME SB 673 / 674 SS 904L WELDED TUBES, HIGH QUALITY 904L WELDED/SEAMLESS TUBING SUPPLIERS UNS NO8904, commonly known as 904L stainless steel, is a low carbon austenitic nickel-chromium stainless steel with additions of molybdenum and copper. 904L pipes, 904L sheets and plates and other 904L product forms products are mainly used where the corrosion resistant properties of 316L and 317L

SA268 TP410 TP410S Tube Ferritic Stainless Steel Seamless Tube A268 TP410 is a typical martensitic chromium-alloy steel grade. It does not have the nickel content and owns the following characteristic: -Harding by heat treatment -High hardness with good ductility -Good corrosion resistance capability -Good wear corrosion resistance -High cold-deformation property Ferritic stainless steels are classified in the 400 series, usually with 10% to 30% chromium content, and are

25.4x2.11 309S Stainless Steel Pipe TP309S 309H Stainless Steel Tube ASTM A213 ASME SA 213 309S Stainless Steel Tube, EN 10216-5 1.4833 Stainless Steel Tubing is typically used for elevated temperature applications. Its high chromium and nickel content provides comparable corrosion resistance, superior resistance to oixidation, and the retention of a larger fraction of room temperature strength than the common austenitic Alloy 304. 309S stainless steel pipe is used often for

316 316L Tubing 38.1x2.11mm Seamless Tubes ASTM A213 Stainless Steel Tube TP 316L Stainless Steel Tube A213 A269 A312 316 Stainless Steel Tubing Pipe 316L Stainless Steel is improved version of 304 Stainless Steel, with the addition of molybdenum and higher nickel content. The resultant Chemical composition of 316 gives the stainless steel much increased corrosion resistance in aggressive environment. Molybdenum make the steel more resistant to pitting and crevice corrosion

SA213 SA312 316Ti Seamless Tube,heat exchanger stainless steel tube TP316Ti Stainless Steel Pipe,ASTM A312 TP316Ti Pipe,ASTM A213 TP316Ti Stainless Steel Tube The weldability of the 316Ti and 316L can be assumed to be similar. Neither of the grades can be expected to weld 'easier' or 'better' than-the-other. Niobium stabilised fillers (welding consumables) should be used for welding the 316Ti, especially where elevated temperature weld strength may be important. In other

25.4x2.11MM TP317/317L Stainless Steel Tube,AMSE SA213 Stainless Steel Tube TP317,317L Stainless Steel Pipe,ASTM A312 TP317L Pipe,ASTM A213 TP317L Stainless Steel Tube 317L Stainless Steel is a low carbon version of 317 stainless steel. It possesses the same high strength and corrosion resistance and will produce stronger welds due to its low carbon content. 317L is similar to 316L stainless steel but provides improved resistance to atmospheric corrosion, to many organic and

S31254 254S MO EN 10216-5 1.4547 ASTM A213 Stainless Steel Tubes 254 SMO S31254 Tubing is compatible with the common austenitic stainless steels. It is often used 316L or 317L has failed by pitting, crevice attack, or chloride stress corrosion cracking. In new construction, 254SMo has been found in many cases to be a technically adequate and much less costly substitute for nickel based alloys and titanium.254SMo is substantially stronger than the common austenitic grade, also

ASME SA268 ASTM A268 TP 405 Stainless Steel 1.4002 Ferritic Tube ASTM A268 ASME SA268 S40500 405 Stainless Steel 1.4002 is a 12% chromium steel, designed to be used in the as welded condition. Unlike other grades in the 12% chromium category, 405 is not susceptible to extensive hardening through air cooling from high temperature. Commonly used for annealing boxes, steam nozzles, quenching racks, partitions and other fabrications that cannot be annealed after welded . ASME

1.TP409L Tubing,ASME SA268 ASTM A268 TP409L 1.4512 Ferritic Stainless Steel Tube Type 409L Tube is a ferritic stainless steel that has a good combination of heat resistance and corrosion resistance. Its titanium stabilized low nickel content provides for an economical metal to corrosion resistance and oxidation resistance . More highly stabilised versions of 409 are useful where 409 has been proven marginal – these grades S40910, S40920 and S40930 are stabilised with titanium

ASME SA213 TP317L U Bend Tubes,Cold Drawn Stainless Steel Tube 317L Stainless Steel is a low carbon version of 317 stainless steel. It possesses the same high strength and corrosion resistance and will produce stronger welds due to its low carbon content. 317L is similar to 316L stainless steel but provides improved resistance to atmospheric corrosion, to many organic and inorganic acids and to food and beverages. 317L’s molybdenum content increases to 3 to 4% from the 2 to 3

TP304N U Bend Tubing,ASME SA213 Cold Drawn Stainless Steel U Bend Tubes​ Stainless steel grade 304 is the most commonly used stainless steel. Stainless steel grade 304N has better corrosion resistance than grade 302, and is mostly non-magnetic in nature; however when cold worked it acquires a slightly magnetic quality. Standards ASTM A 213, ASME SA 213, ASTM A 249, ASME SA 249, ASTM A 688, ASME SA 688, ASTM A 789, ASME SA 789, ASTM B 163, ASME SB 163, ASTM B 167, ASME SB 167,

ASME SA179 U Bend Tube Carbon Steel U Bend Tubes for Boiler Heat exchanger ASTM A179 / ASME SA179 standard covers minimum-wall thickness, seamless cold-drawn low-carbon steel tubes for tubular heat-exchangers, condensers, and similar heat transfer apparatus. ASTM A179 / ASME SA179 standard requires that the tubes be heat treated after the final cold drawn pass at a temperature of 1200°F [650°C] or higher. ASTM A179 U-Bending tubes are widely used in Heat-exchangers. U-bent

Heat Exchanger Ferritic Stainless Steel TP409L/S40900 Welded Tube 19.05x1.65x6096mm Grade 409/409L is a titanium stabilized Ferritic Stainless Steel , most commonly known for use in automotive exhaust systems. It features good mechanical properties and high temperature corrosion resistance. As a matter of fact, 409 / 409L as a chromium Stainless Steel can also be used in applications where weldability and corrosion protection are demanded. Although it is susceptible to rust

Extruded Finned stainless steel heat exchanger tubing 11 FPI 25000MM Length FIN Details Fins Height : Min 0.31” (7.87 Mm) To 0.75” (19.05 Mm) (depending On Tube Od) Fin Density : Minimum 7 Fins Per Inch To Maximum 12.4 Fins Per Inch Material : Aluminum & Copper TUBE Details Tube Diameter : Min 0.5” (12.7 Mm) To Max. 2” (50.8 Mm) Od Tube Mateial : Carbon Steel, Stainless Steel, Copper & Copper Alloys Or As Per Customer’s Requirement. L-foot tension wound finned tubes are an