Electrical Appliance Testing Equipment

Creepage And Clearance Test Card IEC 60598-1 For Measured Surface Of The Insulation Product Information: These test gauges conform to IEC 60598-1 clause 8.2.1, clause 11.2, and IEC60335-1 Clause 29 etc. They are used to determine the shortest path between two conductive parts, or between a conductive part and the bounding surface of the equipment, measured along the surface of the insulation, with specifications made according to the requirements. Features: A creepage

IEC 60745-2 Electric Hammer Durability Impact Test Equipment For Similar Power Tools Product Information: Standard: IEC 60745-2-1: Particular requirements for drills and impact drills, clause 17; IEC 60745-2-6: Particular requirements for hammers, clause 17 and figure 103. Application: This apparatus is applicable to durability test for hand held motor operated electric tools power no more than 2.5KW. Test sample: Electric hammers, Electric drills and impact drills Feature:

Safety Compliance Test Bench For Conduct Electrical Safety Tests On Electronic Devices Product information: Test purpose: Used to provide stable power supply for measurement of various electricians and electrical products. Equipment structure: It is made of 1.5-thick all-steel cabinet with baking paint. The tabletop can be used to place test samples, with instrument storage space. It is equipped with three power outputs: isolation + voltage stabilization + mains power. It has

ISO 23953-2 Horizontal Freezer Slide Lid Opening And Closing Testing Machine System overview: The horizontal freezer slide lid opening and closing test machine is designed and manufactured according to Chapter 5.3.3.2 of ISO 23953-2:2015(E) and customized requirements of customers. It is used for the opening and closing durability test of the horizontal freezer slide lid, also used for lid sliding actions during the energy efficiency performance test of the freezer. It is a

Electrical Appliance Testing Equipment Power Meter For Power Measuring Feature: ACDC wide measuring range, strong adaptability Reliable, stable, small size and light weight Measuring fast, refresh rate up to 0.25s Voltage and current conversion ratio setting extend the measuring range easily Voltage, current and power out range light-sound warning to tell the test result quickly Standard equipped with RS-232 or RS-485 port, support MODBUS communication, make the automatic

IEC 60884-1: 2022 Tumbling Barrel Free Fall Test Apparatus For Drop Resistance Testing Product information: Standard: Conforms to IEC 60884-1: 2022 clause 24.3, IEC 60598-1, IEC 60998.1, VDE0620, IEC 60068-2-32, BS1363.1, EN50075, UL60730, IEC60335-1 clause Annex B 21.101, IEC 60065:2014 clause12.3, etc. Application: This device is suitable for test the drop resistance of plugs and socket-outlets, surface type mounting boxes, screw glands, gland covers, switch and other

IEC60335-2-17 Electric Blanket Spark Ignition Test Device For Test The Flame Resistance Product overview: This device is used for electric blankets, electric heating pads and other similar flexible heating appliances for heating the bed or the human body, it is used to test the flame resistance of the electric blankets, electric heating pads and other similar flexible heating appliances for heating beds or human bodies, and to verify whether the charged body arc flash causes

IEC60335-2-25 Microwave Oven Door & Refrigerator Door Endurance Test Machine Product Information: Standard: IEC 60335-2-25 clause 18 and IEC60335-2-24:2017. Application: 1. The device is used for mechanical endurance test to microwave oven door system includes a hinge structure, microwave seals and other related components; 2. The device is used for durability test of the interlocking device of the door for vertical refrigerators and freezers, also can be used to assist other

VDE 0620-1-2005 Abnormal Heat Of Insulating Sleeves Of Plug Pins Testing Apparatus Product information: This device meets the standards of IEC60884-1 clause28.1.2 figure 40. It is applicable to test improper heating resistance and burning resistance of plug pins and plug with insulation sleeve. Use a heating plate to heat the copper socket to simulate the abnormal heat of the plug and pin insulation sleeve, so as to test its heat resistance performance. It can imitate the

BS EN 12983-1 Cookware Pouring Test Apparatus For Testing The Leakage Volume Of Cookware Product information: It is used for testing the leakage volume of water from the pouring spout of the cookware. A cookware pouring test apparatus is a specialized device used to evaluate the pouring performance of cookware, such as pots, pans, kettles, and pitchers. It is designed to simulate the pouring action of liquid contents from the cookware, allowing for the assessment of factors

BS EN 12983-1 Pencil Hardness Test Apparatus For Exterior Organic Coatings Test Scratch Resistance Product overview: The equipment is complied with BS EN 12983-1 clause 8.4.2 ,8.4.3 and Appendix K. The device uses the pencil nib to compare the scratch resistance of the coating; Apply 4&8N pressure to the pencil, insert the pen core into the hole where the hole is 45° , then the pencil nib completely touches the bottom coating of the pot, and then draw a 2~5cm line on the

Cookware Handle Pull Resistance Test Apparatus For Evaluate Pull Resistance Capacity BS EN 12983-1 Product Information For Cookware Handle Pull Resistance Test Apparatus: It is used for testing resistance to pull on cookware handles. When the handle is subjected to horizontal pull, the degree of deformation cannot affect the function of the handle. After the test, the fasteners are not loosened. It is used to evaluate the pull resistance capacity of the cookware handle. The

BS EN 12983-1 Cookware Testing Equipment For Handle Fatigue Testing Standards for Cookware Handle Fatigue Tester: The design of the handle fatigue resistance test apparatus of cookware complies with BS EN 12983-1:2020 clause 7.6 and Appendix E. Product information for Cookware Handle Fatigue Tester: Used for fatigue test of cooker handles. The handle assembly shall withstand 15,000 cycles without permanent deformation or loosening of the handle or connecting parts. Deformatio

IEC 60745-1 Fuse 5A/250V Ground Resistance Test Equipment With Multiple Test Functions Product Information For Ground Resistance Test Equipment: ■ Automated test function, multiple test functions can be freely combined (the instrument uses four-terminal method to output test current, which is stable and reliable, and is widely used in grounding reliability testing of mechanical and electrical product production lines; suitable for safety regulations in research and developmen

IEC60068-2-32 Bottom Drop Test System Used For Larger Packaging Drop Test Product Overview: It complies with IEC60068-2-32. The Bottom Drop Test System is mainly used to assess the impact of the drop shock on the packaging in the actual transportation and loading and unloading process, and to assess the impact strength of the packaging in the handling process and the rationality of the packaging design. The Bottom Drop Test System is mainly used for larger packaging drop test

IEC 60335-1 Article 13 Power Supply Capacity Touch Current Measurement Circuit Figure 4 Product information: The test network complies with the measurement network requirements of IEC 60335-1 Article 13, IEC 60065: 2014 Article 9.1.1.2 b) and Annex D, Figure D.1, and IEC 60990 Figure 4 - Measurement network, touch current weighting for sensory or startle response. The network is easy to use, simple to operate, the power transfer switch is made separately (see IEC60990 Figure

IEC 60335-2-9 Durability Test Equipment For Mechanically Clamped Toasters Product Overview: 1.1 Applied standards and applications The bakery machine durability test equipment for abnormal operation conforms to IEC 60335-2-9 clause 19.101. It is used to test the durability of toasters under abnormal operation. 1.2 Test principle The toaster is operated at rated input power and normal operation, but without bread, for six cycles and then the toaster is forced to cool to

IEC 62196 Computer Controlled Overvoltage Test System For Electric Vehicle Accessories Product Information: This overpressure test system meets the test requirements of IEC 62196-3-1 Cl 101.6. It is used for pressure leakage testing of liquid coolants up to 10L volume for sealing requirements. The system's booster pump delivers high pressure at different pressures of the sample to verify the sample's pressure resistance. The system consists of an electrical control system, a

IEC 60335-2-2 Vacuum Cleaner Carrier Hose 30RPM Abrasion Test Equipment Product Overview: This abrasion resistance test equipment for flow-through hoses is in accordance with IEC 60335-2-2, Article 21.102, Figure 101. It is suitable for testing the abrasion resistance of flow-through hoses for vacuum cleaners or suction cleaning equipment. Technical Parameters: Power supply Match client's local power supply requirements Control and operation PLC intelligent electrical control

IEC 60335-1 Oxygen Bomb (Air Bomb) Aging Test Chamber For Household Appliances Product Introduction For Air/Oxygen Bomb Test Apparatus: Standard:Conforms to IEC 60811-412, IEC60335-1:2004 clause 22.32, IS: 9968 (Part 1 & 2), IS: 6380, IS: 10810-16, etc. Application:It is applicable for the aging test of the electric wire, the insulation layer and sheath of the rubber (plastic, artificial leather) as well as other high polymer materials under the action of required pressure