Electrical Appliance Testing Equipment

Appendix F of TÜV Rheinland 2Pfg 2577/08.16 Robot Cable Bending Testing Machine Product Information: Standard: Appendix F of TÜV Rheinland 2Pfg2577/08.16 "Requirements for cables used in robot system" Specimen and limitations: Industrial robot cables. Test purpose: Used to test the bending resistance of the power cord of industrial robot cables when entering the joint. Test principle: Using PLC control and servo motor drive, the bending test of industrial robot cables is

ISO23953-2 Vertical Refrigerator Door Opening And Closing Testing Machine Durability Test System overview: The vertical refrigerator door opening and closing test machine is designed and manufactured according to Chapter 5.3.3.2 of ISO 23953-2:2015(E) and customer-specific requirements. It is used for the vertical door opening and closing durability test of vertical refrigerators, also used to match the door opening and closing actions during energy efficiency performance of

IEC 60335-2-36 Mechanical Durability Test Device For Commercial Induction Cookers Product information: The test equipment conforms to the standard requirements of IEC60335-2-36 clause 18.101. The equipment is used to verify the equipment equipped with induction heating source. The structure should be able to guarantee 100,000 times of normal use without failure that may weaken the requirements of this part. The insulation should not be damaged and the connections should not

IEC 60335-2-36 Clause 18.102 Commercial Induction Cooker Heat Resistance Test Device Product information: The test equipment conforms to the standard requirements of IEC60335-2-36 clause 18.102.The equipment is used to verify appliances equipped with glass ceramics or similar surface materials. The structure should be able to ensure the thermal stress occurring in normal use. And after 500 cycles of use, the surface water overflow resistance of the product, the heat

IEC 60335-2-23 Power Cord Flexibility Test Equipment PLC Control With Universal Fixtures Product Information: Standard applied: IEC60335-1 clause 23.3 and 25.14, IEC 60335-2-23 clause 23.3 and 11.101. Test sample: Small household appliances (such as coffee pot, electric iron, toaster, luminaires and etc.), and skin or hair care appliances. Feature: The test device adopts to PLC electrical control, 7-inch color touch screen intelligent operation system; servo motor controlling

IEC 60335-2-14 Cordless Kettles Irons Blenders Stand and Withdrawn Endurance Test Apparatus Product information: Standard: IEC60335-2-3:2015 “Household and similar electrical appliances-Safety-Part2-3: Particular requirements for electric irons” clause 22.105 IEC60335-2-14:2016 “Household and similar electrical appliances-Safety-Part2-14: Particular requirements for kitchen machines” clause 22.103 IEC60335-2-15:2016 “Household and similar electrical appliances-Safety-Part2-15

AC Constant Current Source Output Current 100A SPWM High Frequency Pulse Product overview: The AC constant current source adopts SPWM high frequency pulse width pulse width modulation, IGBT realizes the output, can modulate the output current and frequency, has a fast response speed, high constant current accuracy, and long-term stable operation. And it can overcome current changes caused by grid voltage fluctuations, loop resistance changes, and product internal resistance

IEC 60335-2-3 Figure 103 Feeler Gauge Testing Equipment Stainless Steel Material Standard: This feeler gauge meets the standard of Conforms to IEC 60335-2-3 Clause 22.13 and figure 103. Technical parameters: Test Method: 22.13 Replacement: Appliances shall be constructed so that when handles are gripped in normal use, contact is unlikely between the operator's hand and parts that could be unintentionally touched having a temperature rise exceeding the value specified in Table

IEC 60950 Plug Pin Torque And Pull Device For Verify The Securement Of Devices Pins Of Sockets Product overview: The device conforms to IEC60065:2014 clause 15.4.3 b) and c), IEC60950, IEC 60335, etc. It is used to verify the securement of devices with pins for insertion into fixed sockets. The device has good sensitivity, convenient adjustment, simple operation, beautiful appearance, and strong practicality. Technical Parameters Name Plug Pin Torque And Pull Device Standards

IEC 60335-1 Clause 25.15 Cord Anchorage Pull Force And Torque Tester PLC Control Product information: The Cord Anchorage Force and Torque Test Equipment is designed and manufactured according to the standard requirements of IEC60884-1 clause 23.2, IEC60745-1:2006, IEC60335-1 clause 25.15, IEC60598-1 clause 5.2.10.3, IEC60065 clause 16.5 and etc. The tester is used to conduct two tests of tension and torque at the terminals of appliances (lamps) with power cords, appliances

Defrosting Test Apparatus For Water Evaporation For Accumulation Of Frost IEC 60335-2-14 Product Information: The apparatus for water evaporation for accumulation of frost is designed in accordance with IEC 60335-2-24 clause 11.102 and Annex BB (figure BB.1). Samples and Restrictions: Refrigerating appliances, such as refrigerators, ice-cream appliances and ice-makers. Application: It is used for water evaporation for accumulation of frost. Technical Parameters: Power Supply

IEC60335-1 Pin Torque Test Apparatus For Function Of Force Borne By Detection Device Standards and Application For Pin Torque Test Apparatus: The device conforms to IEC60065:2014 clause 15.4.3 b) and c), IEC60950, IEC 60335, etc. It is used to verify the securement of devices with pins for insertion into fixed sockets. The device has good sensitivity, convenient adjustment, simple operation, beautiful appearance, and strong practicality. Technical Parameters For Pin Torque

Toilet Seat Cover Comprehensive Mechanical Strength Testing Machine IEC 60335-2-84 Product information: Standard:IEC 60335-2-84 “Household and similar electrical appliances-Safety-Party 2-84: Particular requirements for toilet appliances” clause 21.103.1&21.103.2. It used to check whether the toilet seats have adequate mechanical strength and are constructed to withstand repeated mechanical stresses that may be expected to occur during normal use. Test Contents: 1. Opening

IEC 60335-2-7 Pulsar Washing Machine Door Endurance Testing Equipment Durability Testing Product information: Standard: Complies with clause 18.101 of IEC60335-2-7:2016. Uses: It is used to test the durability of the interlocking device of pulsar washing machine lid, and the force test when the interlock is actuated, so as to verify the reliability of the interlocking device; also used to assist other tests for repeated opening and closing operations of the pulsar washing

IEC 60320-1 Clause 14.2 Figure B.1 Steam Sterilizer Moisture Resistance Test Apparatus Product information: The spillage test apparatus is designed and manufactured according to IEC 60335-2-15 clause 15.2 figure 101, and IEC60320-1 clause 14.2 figure B.1. It is intended for checking the weight of the protective measures against liquid overflow to ensure that the structure of the plug-in connector (cordless electric kettle) is not affected by liquid when it is installed in an

IEC 60335-2-3 Figure 102 Simulated Hand Testing Equipment Stainless Steel Standard: This simulated hand meets the standard of Conforms to IEC 60335-2-3 Clause 22.13 and figure 102. Technical parameters: Test Method: 22.13 Replacement: Appliances shall be constructed so that when handles are gripped in normal use, contact is unlikely between the operator's hand and parts that could be unintentionally touched having a temperature rise exceeding the value specified in Table 3

Clause 25.14 Of IEC 60335-1 Power Cord Flexibility Test Equipment PLC control Product Information: Standard: Clause 25.14 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements. Application: It is used to check that the supply cord of the small household appliances (such as Coffee pot / electric iron) and lamps is adequately protected against excessive flexing where it enters the appliance. Test sample: small household appliances,

IEC 60335-1 Anti-Shock Probe Experiment Device Used With The Testing Probe Product Information: This anti-shock probe experiment device is designed and manufactured meet the requirements of the standard of IEC60335-1 Clause 8.1.4, IEC 60065:2014 clause 9.1.1.2, and etc. It is used together with the testing probe for checking whether the probe can contact the live parts of electrical appliance, to verify the protection of persons against access to hazardous parts inside the

IEC 60335-2-59 30KW Resistive Load Bank For Electrical Load To Power Source Product information: This resistive load is required by IEC 60335-2-59 clause 3.1.9. A resistive load bank is a device used to apply an electrical load to a power source, such as a generator, uninterruptible power supply (UPS), or electrical system, for testing, commissioning, and maintenance purposes. It consists of a bank of resistors that emulate the electrical load that the power source would

Toilet Seat Mechanical Strength Test Machine IEC 60335-2-84 Mechanical Stresses Testing Product information: Standard:IEC 60335-2-84 “Household and similar electrical appliances-Safety-Party 2-84: Particular requirements for toilet appliances” clause 21.103.1&21.103.2. It used to check whether the toilet seats have adequate mechanical strength and are constructed to withstand repeated mechanical stresses that may be expected to occur during normal use. Test Contents: 1. 1250N