IEC 60335-1 Oxygen Bomb Air Bomb Aging Test Chamber For Household Appliances
IEC 60335-1 Oxygen Bomb (Air Bomb) Aging Test Chamber For Household Appliances
Product Introduction For Air/Oxygen Bomb Test Apparatus:
Standard:Conforms to IEC 60811-412, IEC60335-1:2004 clause 22.32, IS: 9968 (Part 1 & 2), IS: 6380, IS: 10810-16, etc.
Application:It is applicable for the aging test of the electric wire, the insulation layer and sheath of the rubber (plastic, artificial leather) as well as other high polymer materials under the action of required pressure and temperature in the medium of oxygen and compressed air.
Structural principles:Adopt inner and outer box structure,sample suspended in oxygen tank,purity of oxygen supplied no less than 97%,pressure to 2.1±0.07 MPa ,temperature maintained at 70°±1°±C, aging test for 96hours in this state.
Test Principle: Adopts the servo motor to drive the turntable, to make the specimen to swing left and right, the test will be automatically stopped when the test cycles reach the preset value.
Technical Parameters For Air/Oxygen Bomb Test Apparatus:
| Test station | Single |
| Use Environment | Power supply:AC220V±10%/50-60Hz,compressed air 5~7kg/cm2,0.5KW |
| Technical Parameters |
1. Power supply voltage: 220V (AC) ± 10% |
|
Precautions |
6.1 Connect the power supply of the instrument according to the requirements. 6.2 All power should be cut off when not working 6.3 Please ensure that the equipment is grounded 6.4 The instrument is forbidden to be stored in areas with the following conditions: ※ Inflammable and explosive air environment. ※ Unstable work surface. ※ A place exposed to direct sunlight. ※ A humid place. ※ Corrosive air environment. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.