Battery Testing Equipment

Battery Mechanical Shock Test System Half-Sine Sawtooth Square Wave Shock Tests Product Information: This mechanical shock tester is mainly suitable for shock resistance tests in the fields of electronic products, aerospace, shipbuilding, defense sectors, automotive parts, transportation, etc. By selecting different waveform generators, half-sine wave, post-peak sawtooth wave or square wave Shock tests can be performed. The system meets industry testing standards such as GB

UN 38.3 6000m Altitude & Pressure Test Chamber for Battery Testing Product information: The Altitude & Pressure Test Chamber is widely utilized across various research and application fields, including biochemistry, pharmaceuticals, medical and healthcare, chemical industries, agricultural research, new energy, and electronics. Designed for precision testing under simulated altitude conditions, this chamber ensures efficient and rapid drying of powders, baking, and processing

IEC 62133 Battery Crush And Nail Penetration Test Chamber 150KN with computer control Standard: Conforms to AIS 038 crush test in page no. 79 of 106 cl.no. 3.2, Nail penetration test in page no. 101 of 106 cl.no. 3.3.2 (a) IEC62133-2012, IS0 12405-4:2018, etc. Features: 1. The test software has a voltage acquisition function: according to the test requirements of the single battery, until the battery shell breaks or the battery is short-circuited (the internal voltage of the

UL 1642 Lithium Battery Drop Tester For Battery Drop Strength Test Drop height 30～1500mm Product Information: This test equipment is used to test the drop strength and safety requirements of batteries. Technical Parameters: Item Parameters Power supply AC220V±10%/50Hz Test station Single station Operation interface 7-inch color LCD touch screen Drive mode Stepper motor Control system PLC Control Drop height 30～1500mm, can be preset Lifting speed 0～3mm/s, can be preset Test

Computer Control Type Comprehensive Internal Short Circuit Tester IEC 62133-2 Product information: It conforms to IEC 62133-2: 2017 clause 7.3.9, JISC8714:2007 5.5, and etc. Application: This battery forced internal short-circuit tester is an integral testing equipment to performance a comprehensive test for temperature, voltage, internal-short circuit, which is applicable for battery cell safety test. Technical parameters: 1 Temperature range -5 ~ 100℃ 2 Temperature display

IEC 60086-4 Battery Test Equipment Mechanical Abuse Of Cylindrical Cells Impact Test Product Information: Sample and restrictions: Battery. Test purpose: Used to simulate the situation that various types of batteries are subjected to external impact during use, transportation and storage. Test principle: The test sample battery is placed on a plane, and a rod with a diameter of 15.8±0.2mm (5/8 inch) is placed crosswise on the center of the sample. A 9.1kg or 10kg weight falls

UL 1642 Lithium Battery Acupuncture Tester Force Range 3000N Battery Testing Equipment Product information: The tester is used to simulate the conditions in which various types of batteries are exposed to needle puncture when used, transported, stored or disposed of household waste. The test should be carried out at an ambient temperature of 20℃±5℃, and the battery connected to the thermocouple (the contact of the thermocouple is fixed on the large surface of the battery) is

UL 1642 Lithium Battery Crush Tester Force Range 20KN battery testing equipment Product information: Specimen and restrictions: battery. Test purpose: used to simulate the extrusion of various types of batteries when they are used, transported, stored or processed as household waste. Test principle: place the battery between two plates and apply a squeezing force of 13.0±0.78kN to the plates. The battery should not have external short circuit, fire or explosion. Equipment

IEC 60335-2-29 Fig 101 Charger Normal Operation Test Apparatus For Battery Charger Test Product information: Charger Normal Working Test Equipment is a professional testing equipment that simulates the normal working conditions of a battery charger under load. Designed according to GB/T4706.18-2014/IEC60335-2-29:2010 relevant standards. This equipment mainly consists of DC power supply, capacitive load, resistor and control system. It adopts 7-inch industrial control screen

IEC 62133-1 Pneumatic Structure A3 Steel Plate Battery Drop Test Machine With Encoder Product information: It is conforming to IEC62133-1:2017 clause 7.3.3, IEC62133-1:2017 clause 7.3.3, IEC60086-4 clause 6.5.4, IEC 60086-1, etc. This machine applies for small consumer electronic products like mobile phone, mobile batteries, interphone, electronic dictionary, CD/MD/MP3 etc. and components free dropping testing; specimen automatically lifting to pre-setting height, then free

IEC 62133-1 Battery High And Low Temperature Cycling Test Chamber Product information: It conforms to IEC62133:2017 clause 7.2.4, IEC60086-4 clause 6.4.2, etc. This equipment mainly used for electric and electronic products, components and other materials high low temperature test, temperature change, damp heat etc. Environment simulate reliability test. Other usage except this may cause personal injuries and machinery damages. Parameters: Volume & Dimension Effective Volume

IEC 60335-2 Acceleration Shock Test System For Impact Resistant Test Electronic Product Product Information For Acceleration Shock Test System: It is required by IEC 62133-2:2017 clause 7.3.8.2, IEC 60335-2-25 Annex BB, YD/T 2344.1 and etc. This machine is mainly suitable for the impact resistant test of electronic products, aerospace, ships, military, automobile parts, transportation and other fields. By selecting different waveform generators, impact tests of half sine wave

Electric Vibration Test System Used For Find Early Battery Failure And Simulate Working Condition Product Information For Electric Vibration Test System: Environmental Stress Screening (DCS) is extremely effective in eliminating potential product defects. In the development stage, it becomes a magic weapon to find product design defects to achieve reliability growth; in the production stage, it becomes an important means to reduce production costs and create excellent

IEC 62133-1 Stainless Steel Intake Gauges For Inspection Of Small Cells And Batteries Product information: It complies with standards such as IEC62133-1:2017 Clause 8.2, 10 and Figure 2, IEC62133-2:2017 Clause 8.2, ISO 8124-1 5.2 and Figure 22, and IEC60086-4 Clause 7.2 and Figure 9. It is used to check that children's products, such as small cells and batteries or toys, are not likely to be ingested by children under the age of 36 months. Samples and Restrictions: Small

IEC 60086-4 Battery Test Equipment Mechanical Abuse Of Cylindrical Cells Impact Test Overview: Battery impact test equipment is used to test the safety performance of batteries from different heights through different masses and different impact areas. Batteries are qualified if there is no flame or explosion after the impact test. Standards Compliant: Comply with IEC 60086-4: 2014 Article 6.5.2 Figure 3, UL1642:2012 Article 14 Figure 14.1, UL 2054, UN38.3, GB/T 18287-2013,

UL 1642 FIG. 20.1 Single Station Lithium Battery Fire Exposure Tester Overview: This instrument complies with UL2054 Article 22 (Figure 22.1), UL 1642-2009 Article 20 (Figure 20.1), GB 31241-2014 Article 7.9 (Figure E.2). Battery fire exposure tester is a necessary test equipment for battery manufacturers and quality inspection departments. The equipment is characterized by easy operation, safety and reliability, and high precision. It is the ideal test equipment for battery

IEC 62133 Lithium Battery Test System with Explosion Proof Chamber Product information For Lithium Battery Test System with Explosion Proof Chamber: Battery overcharge and over-discharge explosion-proof box is mainly used for battery overcharge and over-discharge, charge and discharge test, the battery is placed in the explosion-proof box, external charge and discharge test equipment, the operator and the instrument for protection. Technical Parameters For Lithium Battery

IEC 60068-2 Lithium Battery Explosion Proof High And Low Temperature Test Chamber Standards For Lithium Battery Explosion Proof High And Low Temperature Test Chamber: IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT” IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT” IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT” IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests

IEC 62133-1 PLC Touch Screen Control A3 Steel Plate Battery Drop Test Machine Product information: It is conforming to IEC62133-1:2017 clause 7.3.3, IEC62133-1:2017 clause 7.3.3, IEC60086-4 clause 6.5.4, IEC 60086-1, etc. This machine applies for small consumer electronic products like mobile phone, mobile batteries, interphone, electronic dictionary, CD/MD/MP3 etc. and components free dropping testing; specimen automatically lifting to pre-setting height, then free drop and

IEC 62133-1 Battery Vibration Impact Test Bench With Print Function Overview: This vibration system conforms to IEC 60068-2-6, it is required by IEC 62133-1:2017 clause 7.2.2, IEC 62133-2:2017 clause 7.3.8.1,etc. Technical Parameters: Vibration generator Sinusoidal thrust 2940N (300kg.f) Random thrust 2940N (300kg.f) Impact thrust 5880N(600kg.f) Frequency range DG～3500Hz Continuous displacement 20mm Impact displacement (maximum displacement) 25mm Maximum speed 1.8m/s Maximum