EN 50604-1 Clause 6.103 Lithium Battery Drop Tester Drop Height 1000mm With Temperature

Product information:

It conforms to the standard of EN 50604-1 clause 6.103, IEC 62133 clause 7.3.3, etc.

Samples and restrictions: new energy lithium batteries, battery cells, electric vehicle batteries, etc.

Test principle: pneumatic adsorption and release are used to simulate the free fall process of battery products to verify their fall performance.

Equipment structure and features: chamber structure, the door uses explosion-proof lock + explosion-proof chain.

Use environment: power supply: AC220V±10%/50Hz 5KW, ambient temperature: 5℃～+35℃, relative humidity: ≦85%RH There should be no high concentration of dust, corrosive gas and flammable and explosive atmosphere around.

Technical parameters:

Name	Parameters
Model	SN5510
Control and operation	PLC and touch screen intelligent control system with remote control device
Chamber specifications	Inner box WDH = 1000 × 700 × 1500mm, 304 stainless steel, thickness 1.5mm Visible window WH = 390 X 360mm (20mm thick tempered explosion-proof glass)
Constant temperature	-40°C~RT, cooling rate 0.7~1.2°C/min
Drop height	300～1000mm(adjustable)
Test method	Free fall
Test load	0～5kg
Maximum size of specimen	W500 x D100 x H100mm
Drop method	Pneumatic drop
Temperature uniformity	±2℃
Lifting method	Electric lift
Safety devices	Fully enclosed explosion-proof device
Use air pressure	＞0.3Mpa
Drop panel size	W1000 x D700 x H20mm (cement board)
Safety protection	Automatic explosion-proof pressure relief device, explosion-proof chain, three-color light alarm device, remote control, smoke exhaust device, fire extinguishing device, etc.