IEC 60335-2-29 Fig 101 Charger Normal Operation Test Apparatus For Battery Charger Test
IEC 60335-2-29 Fig 101 Charger Normal Operation Test Apparatus For Battery Charger Test
Product information:
Charger Normal Working Test Equipment is a professional testing equipment that simulates the normal working conditions of a battery charger under load. Designed according to GB/T4706.18-2014/IEC60335-2-29:2010 relevant standards. This equipment mainly consists of DC power supply, capacitive load, resistor and control system. It adopts 7-inch industrial control screen for operation and display, and is controlled by PLC. It has the characteristics of easy operation, automatic parameter setting, one-click start, and high stability.
Test schematic diagram:
Technical Parameters:
| Precharged DC power supply | |
| Output voltage range | 0~100V |
| Output current | 0~6A |
| Voltage/current display resolution | 0.1V/0.001A |
| Display accuracy | ±1%RD±0.5%FS |
| Capacitance | |
| Capacitance range | 1000uF~100mF |
| Minimum resolution | 1000uF |
| Gear selection | Automatic selection |
| Volumetric accuracy | ±20% |
| Resistance | |
| Resistance range: | 0.1~100Ω |
| Rated current | 20A |
| Minimum resolution | 0.1Ω |
| Gear selection | Automatic selection |
| Volumetric accuracy | ±20% |
| Control system | |
| Charger output voltage range | 12~72V |
| Maximum output current | 20A |
| Precharge voltage range | 0 to 72V, can be set. |
| Voltage detection range | 0~100V |
| Display resolution | 0.01V |
| Display accuracy | ±1%±0.5%FS |
| Current detection range | 0~20A |
| Display resolution | 0.001A |
| Display accuracy | ±1%±0.5%FS |
| Control mode | PLC |
| Display mode | 7 inch display |
| Test station | 1 station |
| Working environment |
Temperature: 5℃ ~ 40℃, indoor Humidity: less than 75% RH, no frost |
| Equipment size | 450X550X235mm |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.