Switch Life Tester

IEC 60691 Intelligent Thermal Fuse Tester 0-300A Endurance & Overload Test Equipment Product Description The Intelligent Thermal Fuse Tester is a specialized instrument designed for testing the performance of small fuses, including fuse blowing time and current measurement. It complies with GB/T 9364.1-2015, GB 9364.3-2018, GB/T 9816.1-2023 Clause 10.4, and IEC 60691-2023 standards for fuse, endurance, and overload testing requirements. Equipped with a 7-inch touch screen for

Power Cord Flexing Tester With Load Bank For Non-Rewirable Plugs And Socket-Outlets Product Information: This cord flexing test apparatus is designed to perform the required flex endurance testing specified in IEC 60884-1:2022, Figure 21, Clause 23.4. It’s used to precisely evaluates the flexible cable of non-rewirable plugs and non-rewirable portable socket-outlets. Technical parameters: Power Supply Three-phase four-wire with ground, AC 380V ±10% / 50Hz Workstation Load

IEC 60884-1 Torque Test Device for Plug Socket Cord Anchorage Cable Sheath Wear Test Product Description This Cord Anchorage Torque Testing Device is designed for testing the mechanical durability and wear resistance of plug and socket cable connections, especially focusing on the strain relief area. It fully complies with multiple international standards, including IEC 60884-1:2006 clause 23.2, IEC 60335-1 clause 25.15, and VDE 0620 table 18. The equipment simulates real

Anti - Shock Probe Experiment Device Used With The Testing Probe IEC 60335-1 Product Information: This anti-shock probe experiment device is designed and manufactured meet the requirements of the standard of IEC60335-1 Clause 8.1.4, IEC 60065:2014 clause 9.1.1.2, and etc. It is used together with the testing probe for checking whether the probe can contact the live parts of electrical appliance, to verify the protection of persons against access to hazardous parts inside the

IEC 60669-1 Conductor Damage Degree Test Machine for Terminal Reliability Evaluation Product information: Standards Compliance: IEC 60884-1:2022 (Clause 12.2.5, Figure 13) IEC 60669-1:2017 (Clauses 12.2.5 & 12.3.10, Figure 9) Application: This testing equipment evaluates the mechanical strength of both screw-type and screwless terminals under normal operating conditions. It verifies whether terminal designs can securely clamp conductors without causing excessive damage. Test

ASTM D-412 Dumbbell Test Piece Punching Machine Punching stroke ≥120-150MM Product Overview: The dumbbell test piece punching machine conforms to ASTM D-412, IEC 60227-1 Table 1 Reference No.1.1,1.2 (IEC 60811-401 and 501), Table 1 IEC 60811-1-1 Figure 12~15, etc. It can be equip with various dumbbell dies according to the needs for cutting piece (please note that the dumbbell dies are not included in this machine). Technical Specifications: 1.Punching stroke: ≥120-150MM

IEC 60745-2-5 Figure 110 Probe B" With 12mm Diameter 50mm Length For Circular Saws Test Product Overview: Standard: IEC 60745-2-5 : Particular requirements for circular saws, clause 19.101.2.4 and Figure 110 Application: This probe is applicable to checking the accessibility of the cutting edge zone at the saw above the guide plate. Test sample: Circular saws For checking the accessibility of the cutting edge zone at the front of the saw above the guide plate, the rigid test

IEC 60745-2-5 Figure 105 Probe "A" With Probe Length 50mm For Circular Saws Test Product Overview: Standard: IEC 60745-2-5: Particular requirements for circular saws, clause 19.101.2 and Figure 105 Application: This probe is applicable to verify the upper guard protection against to touch the blade. Test sample: Circular saws Feature: Apertures in the guarding system above the guide plate, unless otherwise specified below, shall be designed such that the test probe ‘a’ of

UL 1017 Figure 3 Straight Probe For Testing Of Enamel Coated Wires Probe length 101.6mm Product Overview: UL 1017 is a safety standard titled “Standard for Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines.” Figure 3 in this standard refers to the Straight Probe, which is used in accessibility and entrapment testing to simulate a person’s finger or object interaction. Standard:UL1017 Figure 3, UL982 Figure 64.8, UL398 Figure 8.2 (PA170B), UL507 (PA170D)

UL 1017 Figure 9 Impactor Testing Mechanical Strength For Brush Caps And Switch Actuator Product Overview: This UL 1017 Figure 9 Impactor is specifically designed for mechanical strength testing of brush caps and switch actuators in accordance with UL 1017 standard requirements. It is used to assess the ability of these components to withstand impact forces during normal use, ensuring product safety and compliance. Features: Standards Compliance: Conforms to UL 1017, Figure 9

Terminal Stress Tester for Screwless & Threaded Connectors UL486A-B Compliance Device Product Information: This testing device conforms to UL486A-B clause 9.3.2.1, clause 9.3.2.3, clause 9.3.2.4 and table 26 and figure 6, IEC60947-1, etc. Specimens and restrictions: Screw terminals, threadless terminals and connectors. Test purpose: To examine whether the screw terminals and threadless terminals can withstand the mechanical stresses that occur during normal use. It is mainly

IEC 60335-2-64 Similar Test Probe B But Having A Circular Stop Face With Diam 56mm Product information: This test probe meets the requirements of IEC 60335-2-64 clause20.2, etc. Test probe similar to that of probe B of IEC 61032 but having a circular stop face with a diameter of 56mm instead of the non-circular face. Technical parameters: Model SN2210-2D Name Test Probe B Joint 1 30±0.2 mm Joint 2 60±0.2 mm Fingertip to baffle 120 Cylindrical R2±0.05 mm Spherical R4±0.05 mm

UL486A-B Table 26 Wire Damage Testing Device Screw Terminals Mechanical Stress Test Product Information: This testing device conforms to UL486A-B clause 9.3.2.1, clause 9.3.2.3, clause 9.3.2.4 and table 26 and figure 6, IEC60947-1, etc. Specimens and restrictions: Screw terminals, threadless terminals and connectors. Test purpose: To examine whether the screw terminals and threadless terminals can withstand the mechanical stresses that occur during normal use. It is mainly

IEC 60669-1 Switch Plug Socket Endurance Tester 6 Linear And Rotary Stations PLC Control Product overview: The test equipment has 6 work stations: 3 linear stations synchronously, which can test 3 linear rocker switches and push-button switches, the other 3 rotary stations synchronously, which can test 3 tumbler switches at the same time. The equipment will automatically stop and alarm if one of the stations in abnormal running. This device complies with standard terms of IEC

IEC 60884-1: 2022 Switches Plug And Sockets Endurance Tester With Multiple Testing Stations Product overview: The test equipment has 6 work stations: 3 linear stations synchronously, which can test 3 linear rocker switches and push-button switches, the other 3 rotary stations synchronously, which can test 3 tumbler switches at the same time. The equipment will automatically stop and alarm if one of the stations in abnormal running. This device complies with standard terms of

IEC 61058-1 Household Appliances Couplers Endurance Test System Standards & Clauses: IEC61058-1:2008 “Switches for appliances Part1: General requirements” clause 17 IEC60884-1:2006 “Plugs and socket-outlets for household and similar purposes- Part1: General requirements” clause 20 and 21 IEC60669-1:2007 “Switches for household and similar fixed-electrical installations - Part1: General requirements” clause 18 and 19 IEC60320-1:2007 “Appliance couplers for household and

IEC60884-1 Six Stations Switches Plug and Sockets Endurance Tester Standards & Clauses: This apparatus conforms to IEC60884-1:2006 “Plugs and socket-outlets for household and similar purposes- Part1: General requirements” clause 20 and 21 IEC61058-1:2008 “Switches for appliances Part1: General requirements” clause 17 IEC60669-1:2007 “Switches for household and similar fixed-electrical installations - Part1: General requirements” clause 18 and 19 IEC60320-1:2007 “Appliance

IEC 60068-2-75 IK Code High Energy Pendulum Impact Test Apparatus Plug And Socket Test Equipment information: The high energy pendulum impact test apparatus is designed and manufactured according to the requirements of IEC60068-2-75, IEC60884-1:2013, IEC62262:2002 clause 6, etc. It is used for the impact resistance test of household and similar electronic and electrical products and their accessories such as plugs and sockets and wall mounted mounting boxes, screw glands,

BS 1363-1 Figure 2a/2b Apparatus For Mechanical Strength Test On Resilient Covers Product information: The test apparatus conforms to BS1363-1: clause 9.3.1, figure 2a) and figure 2b), BS1363-2: clause 9.3.1 figure 2a) and figure 2b). Technical Parameters: 1. Test pressure:230-240N 2. Hammer diameter:25.0-25.2mm² 3. Chamfering of pressure hammer:R2.0-2.5mm 4. Hardwood Block 75*75*38mm (WDH)

BS 1363-1 Pressure Test At High Temperature Test Apparatus For Heat Resistance Testing Product information: Standard: IEC 60884-1: 2022 clause 30.2 figure 44, IEC60598-2-20 clause20.15, IEN60811-3-1, VDE0620, BS1363, etc. Application: is used to test the heat resistance of the insulation material. Test sample: Plug and switch power cords, electrical cable and wires Feature: It has a rectangular blade (see figure 41a) with an edge 0,7 mm wide, to be used in the case of round