Switch Life Tester

Rubber Cables Flexing Test Apparatus IEC 60227.2 Figure 1 0.33m/S Equipment overview: The test machine is designed and manufactured according to standard IEC 60227.2 Clause 3.1 Figure 1, IEC 60245.2 Clause 3.1 Figure 1, IEC60245-1 clause 5.6.3.1 and etc. It complies with the relevant standard requirements of rubber plastic wires’ and cables’ mechanical strength flexing test. This test does not apply to flexible cables with cores of nominal cross-sectional area greater than

IEC 60884-1: 2022 Power Cord Flexing Test Apparatus For Flexible Cable Plugs Product Information For Power Cord Flexing Test Apparatus: The power cord flexing test apparatus meets the requirements of IEC 60884-1:2022 figure 21 clause 23.4, which is used to process the flexing test for the flexible cable of non-rewirable plugs and non-rewirable portable socket-outlets. Technical parameters For Power Cord Flexing Test Apparatus: Power Supply AC220V, 50Hz or match the client's

IEC 60884-1 Figure 21 Apparatus for Flexing Test of Plug Socket-outlet Flexible Cable Product information: The flexible cable flexibility test apparatus meets the requirements of IEC 60884-1 figure 21 clause 23.4, which is used to process the flexing test for the flexible cable of non-rewirable plugs and non-rewirable portable socket-outlets. Equipment characteristics: The test times (up to 999999) can be preset on this test apparatus, and the test can be carried on and the

IEC 60884-1 Figure 20 Rewirable Plugs and Socket-outlets Cord Retention Test Apparatus Standard: IEC60884-1 clause 23.2 figure 20. Application: It is used for testing rewirable plugs and rewirable portable socket-outlets shall be provided with a cord anchorage such that the conductors are relieved from strain, including twisting, where they are connected to the terminals and that their covering is protected from abrasion. Test sample: Rewirable plugs and rewirable portable

UL498 UL486A-B Conductors Damage Degree Test Machine 2 Stations Product Introductions: This conductors damage degree testing machine is also called the test apparatus for checking damage degree of wire which confirms to standards UL486A-486B and UL498 SD5.3 test method B, etc. This test machine is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requirement of non over-damage to the wire. Besides, it is also used

IEC 60669-1 Clause 12.2.5 Figure 9 Conductor Damage Degree Test Machine Product Information: The conductor damage degree test machine is designed and manufactured according to the standard requirements of IEC 60669-1:2017 clause 12.2.5 &12.3.10 figure 9, IEC 60884-1:2013 clause 12.2.5 figure 11, UL486A-B, etc. This device is use to check whether the terminals with screw and screwless terminals can bears the mechanism force under normal operation. Mainly use to judge whether

IEC 60884-1 UL 498 Cord Conductor Damage Degree Tester New Version Equipment overview: Compliant with standards: IEC60884-1: 2013 Figure 11 and Table 9, UL 498. etc. It is used to examine whether threaded terminals and non-threaded terminals can withstand the mechanical stress that occurs during normal use. It is mainly used to judge whether the design and structure of the screw clamp type terminal have reached the requirement of not excessively damaging the wire when

IEC61439-1 High Energy Pendulum Impact Test Apparatus Equipment Introduction: The high energy pendulum impact test apparatus is designed and manufactured according to the requirements of IEC61439-1:2009, IEC62262:2002 clause 6, IEC60068-2-75, etc. It is used to test the mechanical collision strength degree when the electrical equipment shells collide external objects. The frame of this device is constructed by aluminum tubes, the structure is compact and durable. The mounting

IEC 60811 Stainless Steel 4000cm3 Air Bomb Tank Oxygen Bomb Aging Chamber for Cable Testing Equipment introduction: This oxygen bomb (air bomb) aging test chamber conforms to the standard requirements of IEC 60811-1-1 sub clause 9.1 and IEC 60811-1-2 sub clause 8.3, etc. It is applicable for the aging test of the electric wire, the insulation layer and sheath of the rubber( plastic, artificial leather) as well as other high polymer materials under the action of required

IEC6 Power Cords Bending Resistance Flexible Cable Test Equipment Product Information: The test equipment is designed and manufactured according to the standard requirements of IEC60884-1: clause 23.4, IEC60335-1: clause 25.14, IEC60745-1: clause 24.12, IEC60227-2: clause 3.2 and etc. It is used to detect the bending resistance of the household appliance power cord in entrance section and verify its reliability. It adopts the motor to drive the turntable to rotate, applies a

IEC 60065 Corrosion-Resistance Metal 230° Rotating Angle Mandrel Test Apparatus Product Overview: This test apparatus conforms to IEC60065:2014 clause 8.21, figure 14~16, IEC60558-1 Fig6, IEC 60950 and etc. It is used for tensile and electrical strength verification for non-separable thin layer materials. This test apparatus has the mechanical limits in the position of 0o and 230o to make sure the accuracy of the testing angle. Technical Parameters: Mandrel Material Made of

IEC 60950 100N and 250N Stainless Steel Diameter Thrust Rod with Nylon Handle Product Overview: The thrust rod conforms to IEC 60950: 2013 clause 4.2.4, IEC 60065:2005 clause 9.1.7 c), IEC 60884.1-2002 and etc. It is used to test the mechanical strength of the external conductive shell and the conductive parts of the external shell of audio, Ф30,video and similar electronic equipment. Technical Parameters: Diameter of circular plane surface of force applied Ф30 mm Applied

IEC60898-1 AC Circuit Breaker Mechanical Shock Multiple Perspectives Tester Product overview The mechanical shock test equipment is based on the relevant requirements of IEC60898-1, IEC61009-1, IEC60934:2007. Design and manufacture, suitable for circuit breaker products, to verify the impact resistance of exposed parts that may be subjected to mechanical shock during normal use of the circuit breaker. The equipment adopts PLC control, touch screen operation, motor-driven cam

Standards & Clauses: IEC60068-2-75:1997 IEC60884-1:2006clause 24.1 and figure22-26 IEC60598-1:2014 IEC60669-1:2007clause 20.1 IEC62262:2002 Technical Parameters: Energy/J 0.14, 0.2, 0.35, 0.5, 0.7, 1.0 Equivalent Mass kg 150g±1g (200g),200g±1g (250g) optional Pendulum Tube Length 1000mm,outer diameter 9 mm, wall thickness 0.5 mm steel pipe Impact Point With the adjustable range of sample mounting bracket

IEC60881 Household Plug And Socket-Outlets General Required VDE Gauges Standards & Clauses: The measuring gauges are required by IEC60884-1:2013 & DIN VDE 0620-1:2010 Gauge List. Technical Parameters: No.: Figure No. Name QTY 1 DIN-VDE0620-1-Lehre1 Socket jack R size gauge (5.0, 5.8, 6.0) 3 PCS 2 DIN-VDE0620-1-Lehre2 Minimum opening width and minimum withdrawal force of contact socket 2 PCS 3 DIN-VDE0620-1-Lehre3 Insertion force of bipolar plug 1 PC 4 DIN-VDE0620-1-Lehre4

Standards & Clauses: The measuring gauges are required by IEC60320-1&IEC60320-3. Technical Parameters: No.: Figure No. Name QTY/PC 1 Figure 4 6.5 "GO" -gauge for connectors according to standard sheet C7 1 2 Figure 5 6.6 "GO" -gauge for side-entry connectors according to standard sheet C7 1 3 Figure 7 6.8 "NOT-GO" gauge for connectors according to standard sheets C1, C5 and C7 1 4 Figure 8 6.9

IEC 60669 Clause 18.3 The Halogen and Filament Lamp Load Cabinet Max. 20A Product Information: This halogen lamp load cabinet meets the requirements of IEC60669 Clause 18.3, UL1054, UL943, etc. This device is used for household and similar purpose fixed electrical appliance switch, plug and socket, coupler for on-off ability, breaking capacity and normal operation life test. The purpose is to assess whether the accessory can withstand the current surge and electrical fatigue

Natural Convection Oven Natural Circulation Air Ageing Heating Cabinet Product Information: This device is required by IEC 60884-1:2013 clause 16.1, IEC 60669-1 clause 15.1, IEC 60065:2014 clause 12.1.6, etc. It is used to perform thermal aging test to polymer materials (plastics, plastics and electrical insulating materials such as: wire and cable sheathing, heat shrinkable tube, rubber test or PVC materials, and the insulating components, or use for drying, baking, heat

IEC 60884-1 Clause 11.5 Multitester Electrical Safety Tester Product information: This multitester electrical safety tester Conforms to IEC 60884-1:2013 clause 11.5, 17.1, 17.2, IEC 60669-1 clause 11.4, clause 16, IEC 60950:2013 clause 2.6.3.4, 5.2 and 6.2.2.3, IEC 60335-1 Clause 10, 13, Clause 16, Clause 27 and etc. It integrates 6 functions of hi-pot, insulation, grounding, leakage, power, low-voltage start testing. Features: ■ Meet CCC, IEC, EN, VDE, BS, GS, UL and other

Product Information: The Polyvinyl Chloride Insulated Cable Testing Equipment is designed and manufactured according to the standard requirements of IEC60227-2 clause 3.3 IEC60227-1 clause 5.6.3.3, and etc. It is used to test whether the flexible cable can withstand a certain force during normal use by drop freely at a height of 0.5m. The test can check mechanical strength performance of cables. The