Fiber Optic Splitter

Multimode PLC Splitter is a passive optical device used to split incoming signals into two or more output signals. They’re capable of operating over a broad wavelength range from 650 nm to 1350 nm (Typ. 650nm, 850nm and 1300/1310nm). 62.5/125 and 50/125 (OM1, OM2, OM3 and OM4 fiber) are now available. These multi-mode fiber PLC splitters features wavelength insensitive, mode insensitive, low insertion loss, high stability and reliability Features Mode Insensitive Wavelength

Multimode PLC Splitter is a passive optical device used to split incoming signals into two or more output signals. They’re capable of operating over a broad wavelength range from 650 nm to 1350 nm (Typ. 650nm, 850nm and 1300/1310nm). 62.5/125 and 50/125 (OM1, OM2, OM3 and OM4 fiber) are now available. These multi-mode fiber PLC splitters features wavelength insensitive, mode insensitive, low insertion loss, high stability and reliability Features Excellent Environmental

PLC stands for Planar Lightwave Circuit. PLC splitters are used to distribute or combine optical signals. It is based on planar lightwave circuit technology and provides a low cost light distribution solution with small form factor and high reliability.LGX Box PLC Splitters provide a cost effective and space saving product suitable to the ever changing networking requirements. With it's compact size, these splitters can be utilized in in-ground and aerial pedestals as well as

1x2 1310/1550nm Fiber Optic Fused Coupler Steel Tube 0.9mm SC/APC 5/95 Singlemode wideband coupler can make the optical singal re-coupled in the special couple area during the transmission, then reassigned the optical power. Optional Coupling ratio.The Singlemode Optic-fiber Tree and Star Couplers can couple the optical signals in the coupling area, and then re-distribute the light power. The key parameters include operating wavelength, bandwidth, and excess loss, coupling

1X128 2X128 optical PLC splitter module, G657A1, Splice/Pigtailed SC APC, Single mode,1.5m Pigtailed ABS splitter is most commonly used in the PON networks. It provides the complete protection for inner optical components and cable, as well as designed for the convenient and reliable installation, but its volume is relatively large. It's mainly used for various connection and distribution products(outdoor fiber distribution box) or network cabinets.UNIFIBER provide full

1x4 coupler module single mode dual window 1310/1550nm 1 in 4 out plug in optical splitter LGX cassette box Dual window coupler (DWC) is built by asymmetric coupling technique. The operating bandwidth of this normal coupler is expanding to ±40nm, and the ultra broadband coupler is expanding to ±80nm. The DWC coupler has the same coupling ratio on both 1310nm and 1550nm communication windows, and with low excess loss and low PDL. DWC couplers are widely used for communication

Fiber optical PLC splitter LGX Chassis for 1x8 LGX modules, 19-inch 3.5U with 16 slots​ This LGX chassis is for 19inch rack mount use. Totally it has 16 slots and can hold 16pcs 1x2 or 16pcs 1x4 or 16pcs 1x8 or 8pcs 1x16 or 4pcs 1x32 LGX module APPLICATION FTTx Systems Digital, hybrid and AM-Video systems LAN,WAN and Metro Networks CATV systems Other applications in fiber optic systems FEATURES Low Insertion loss and Low PDL Uniform power splitting High reliability Excellent

Mini Size Dual Window Coupler (DWC) 1310 and 1550nm for EDFA compact optical modules The mini size DWC is designed for the compact optical modules and communication systems. Dual window coupler (DWC) is built by asymmetric coupling technique. The operating bandwidth of this coupler is expanding to ±40nm. The DWC coupler has the same coupling ratio on both 1310nm and 1550nm communication windows. Features Low Insertion loss Low PDL Excellent Environmental & Mechanial Stability

1x2 fbt coupler splitter steel tube 0.9mm FC/APC Singlemode coupler 1X2 2X2 offer very low insertion loss, low polarization dependence and excellent environmental stability Accurate coupling ratio from 50/50 to 1/99 and fiber type 250um bare fiber, 3mm and 900um loose tube fiber are available with very tight uniformity. Singlemode standard coupler and wideband coupler components find extensive application to perform power splitting and monitoring functions in all kinds of

Fiber Fused Biconical Taper Coupler 1 in 2 out mini steel tube 0.9mm SC APC 50/50 For CATV Fiber Optic FBT splitter is a type of optical power management device that is fabricated using Fused Biconical Tape technology.It features small size, high reliability, cheap cost and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. Features: Low Insertion Loss Low Excess Loss Low PDL Good Directivity Good environmental

1x2 Single Mode FBT Fiber Coupler 1310/1550nm Dual window coupler (DWC) is built by asymmetric coupling technique. The operating bandwidth of this normal coupler is expanding to ±40nm, and the ultra broadband coupler is expanding to ±80nm. The DWC coupler has the same coupling ratio on both 1310nm and 1550nm communication windows, and with low excess loss and low PDL. DWC couplers are widely used for communication systems, CATV and FTTH. Features Low insertion loss Low PDL

Single Mode 1310/1550nm FBT Optical Coupler Splitter Fused Biconical Taper (FBT) is used for splitting or combining optical signals. The splitting or coupling ratio is controlled and can be modified upon costumer request as well as the amount of splitting ports. The FBT coupler supports dicrete wavelength window. Features Low insertion loss High channel isolation Excellent environmental reliability Low PDL Application CATV Links FTTX Systems PON Networks​ Optical Signal

Single Mode 1310/1550nm FBT Splitting Optical Coupler is used for splitting or combining optical signals. The splitting or coupling ratio is controlled and can be modified upon costumer request as well as the amount of splitting ports. The FBT coupler supports dicrete wavelength window. Features Low insertion loss High channel isolation Excellent environmental reliability Low PDL Application CATV Links FTTX Systems PON Networks​ Optical Signal Distribution Specification

1x2 Single Mode Dual Window 1310/1550nm Fused Fiber Optic Couplers offer very low insertion loss, low polarization dependence and excellent environmental stability Accurate coupling ratio from 50/50 to 1/99 and fiber type 250um bare fiber, 3mm and 900um loose tube fiber are available with very tight uniformity. Singlemode standard coupler and wideband coupler components find extensive application to perform power splitting and monitoring functions in all kinds of optical

ABS module G657A1 1x4 Optical PLC Splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting.UNIFIBER provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All products meet GR-1209-CORE

FTTH 8 Way Passive Optical Splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting.UNIFIBER provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All products meet GR-1209-CORE and GR

FTTH 1x8 PLC Splitter LGX Cassette Box SC/APC Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting.UNIFIBER provides whole series of 1xN and 2xN splitter products that are tailored for specific

Mini Type PLC Optical Splitter 1x24 Single Mode G657A1 900um Color Coded Pigtail Planar lightwave circuit (PLC) splitter is fabricated using silica optical waveguide technology. It features wide operating wavelength range, good channel-to-channel uniformity, high reliability and small size, and is widely used in FTTX PON to realize optical signal power management. FEATURES Low insertion loss and low PDL Uniform power splitting High reliability Excellent environmental

1x2 1310 or 1550 Single Mode Standard Fiber Optic Coupler (SSC) 1310 or 1550 Single Mode Standard Fiber Optic Coupler (SSC) features low excess loss, high stability and reliability. It is widely used for optical fiber communication systems and CATV systems. Features Low excess loss Low PDL High stability and reliability Application CATV Optical communication systems Testing instruments Specifications Grade P A Parameter Operating wavelength (nm) 1310 or 1550, others on

Low PDL 1x2 1310nm/1490nm/1550nm Three-Window Optical Fiber Coupler Splitter 1x2 1310nm/1490nm/1550nm Three-Window Optical Fiber Coupler Splitter Built by asymmetric coupling technique, TWC operating bandwidth is expanding to 1310nm, 1490nm and 1550nm three communication windows. The TWC coupler has the same coupling ratio on 1310, 1490 and 1550nm communication windows, with low excess loss and low PDL. TWC is widely used for communication systems, CATV, FTTH, where multiple