Double Tied Expansion Joints

Transverse expansion joints corrugated expansion joint of large pull rod General description The bellows expansion joint is a flexible component consisting of two corrugated pipes and rods and end plates with the same geometric parameters and wave numbers connected by the middle pipe. It is mainly used to compensate the lateral displacement of single plane or multi plane curved pipe section. It is suitable for "L" and "Z" type pipes. Because the pull rod can bear the pressure

horizontal large pull rod bellows expansion joint GB/ t12777-2008 Product Description The double pull rod type expansion joint is composed of two bellows connected by the middle pipe, the pull rod, the end plate, the spherical and conical washer and other structural parts, which can absorb the transverse displacement in any plane and can withstand the expansion joint of the bellows pressure thrust. Product Specification Product name: horizontal large pull rod bellows

Product description There are many types of bellows compensators, such as various types such as horizontal and angular multiple compound corrugated, directly buried internal and external pressure type, and general customers need to clearly explain where to use, pressure, and how much compensation is required when purchasing.And the temperature and other parameters of the medium, can determine which kind of compensator is suitable, the compensator is also called expansion

double tied expansion joint bellows Large pull rod transverse ripple compensator Product description (1) Large pull rod transverse ripple compensator, is a kind of used to compensate the bending pipe transverse displacement. (2) small tie rod lateral compensator is also customarily called expansion joint, or expansion joint.It is composed of the bellows (an elastic element) forming its working body and accessories such as end pipes, supports, flanges and conduits.A small tie

Middle flexible double tied expansion joint bellows high pressure rating Product description Double Tied Expansion Joint The double tied expansion joint is well suited to allow lateral deflection in the low to medium pressure range. Used in this manner the tie rods will absorb the pressure thrust. The design may also be used to absorb axial movement but this would result in the pressure thrust being taken from the tie rods and transmitted to the anchors or adjacent equipment.

double tied expansion joint bellows apply in power station Product description Duplex tie rod type expansion joint (FL) is also called large tie rod transverse ripple compensator (expansion joint). It consists of two bellows and tie rods connected to the middle pipe, end plates, spherical and cone washers, etc.Expansion joint that is laterally displaced in the plane and can withstand the pressure and thrust of the bellows. Description 1. After the compensator arrives, the

Custom Color double tied expansion joint bellows with tieds Product introduction Compound tie rod transverse corrugated expansion joint: it can compensate the transverse displacement in any plane of the curved pipe, and can also withstand the pressure thrust generated by the internal pressure of the pipeline medium.The bellows expansion joint of the transverse tie rod is a flexible part composed of two bellows connected by the intermediate pipe with the same geometric

Duplex axial stainless steel bellows compensator expansion joint Product description A ripple compensator belongs to a compensation element.The effective stretching deformation of the bellows of the working body is used to absorb the dimensional changes of the pipelines, conduits and vessels caused by hot expansion and cold contraction, or to compensate the axial, transverse and angular displacements of the pipelines, conduits and vessels.It can also be used for noise

Compound small tie rod type expansion joint ISO9001 Certification Product description The ball compensator compound small pull rod type expansion joint consists of two bellows, a middle pipe and a small pull rod with a limit nut.It can absorb not only the horizontal displacement of the pipeline, but also the axial displacement of the pipeline and their resultant displacement.It should be noted that its small tie rod and limit nut do not belong to the load bearing members, can

Corrosion resistant double tied expansion joint bellows Product Description The expansion joint is composed of two bellows connected by the intermediate pipe and structural parts such as pull rod, end plate and spherical and conical washer, which can absorb the transverse displacement in any plane and can bear the pressure thrust of the bellows. Product description There are many types of bellows compensators, such as various types such as horizontal and angular multiple

Dual Pipe Expansion Joint for Large Axial Movement Compensation Product Feature: 1)Compensation absorption pipeline axial, transverse and angular thermal deformation. 2)Expansion of ripple compensator to facilitate installation and disassembly of valves and pipelines. 3) Absorb equipment vibration to reduce the influence of equipment vibration on the pipeline. 4)Absorb the deformation amount of the pipeline caused by earthquake and sinkhole. product brand FIDAK Features

professional Customized design double tied expansion joint bellows CCC certification Product description The metal corrugated compensator can be connected in any direction in the pipeline for temperature compensation and absorption of vibration, reducing noise, changing the direction of medium transportation, eliminating mechanical displacement between pipelines or between pipelines and equipment, etc. Double-flange metal corrugated hosesIt is especially suitable for flexible