Titanium Rod

Gr2 Gr5 Gr9 Titanium Round Rod 6mm 45mm This titanium round rod is supplied in Gr2, Gr5 and Gr9 for chemical industry use, in outside diameters from 6 mm up to 45 mm and cut lengths of 1000 mm or 3000 mm. Stock diameters of 3, 6, 8, 10, 20 and 30 mm are held for fast delivery. The bar is produced to ASTM B348, ASTM F67, ASTM F136 and AMS 4928 in cold rolled, hot rolled or annealed condition, with a bright, polished or pickled surface. The polished finish is free from cracks

ASTM F136 Gr23 Medical Titanium Implant Rod This medical titanium rod is made to ASTM F136 in Gr5 ELI / Gr23. Titanium 6AL4V and 6AL4V ELI, alloys made of 6% aluminium and 4% vanadium, are the most common types of titanium used in medicine; because of their harmonizing factor with the human body they are widely used in medical procedures, and they are also known as Gr.5 and Gr.23 when used in dental implants. The rod is annealed and supplied with a bright, polished surface.

Gr5 Ti-6Al-4V Titanium Rod R56400 AMS4928 This is an annealed Gr5 (Ti-6Al-4V) titanium round bar produced to ASTM B348 and AMS 4928, equivalent to UNS R56400 and W.Nr 3.7165. Gr5 is a typical low-temperature titanium alloy whose strength increases as temperature falls while its plasticity changes only slightly; it keeps good ductility and toughness at low temperature and avoids the cold brittleness of other metals. It is therefore a suitable material for low-temperature

ASTM B348 Gr2 Gr5 Titanium Round Bar Polished This titanium round bar is produced to ASTM B348, ASTM F136, ASTM F67 and AMS4928 in Grade 1, Grade 2, Grade 3, Grade 4, Grade 5 (Ti-6Al-4V), Grade 7 (Ti-0.2Pd), Grade 9 (Ti-3Al-2.5V) and Grade 12 (Ti-0.3Mo-0.8Ni). Diameters run from 5 mm to 350 mm with lengths of 500 to 3000 mm or as requested, in the annealed condition with a polished or bright surface, and the material is also supplied as square, flat, hexagonal or rectangular

Cold Drawn 10mm Titanium Hex Rod Gr5 Gr9 This cold drawn titanium rod is supplied in round, square and hex shapes, with 10 mm, 25 mm and 30 mm diameters and a standard 3000 mm length. It is produced from Gr1-Gr12 titanium including Gr5, Gr9 and Gr12, by hot forging, hot rolling or cold drawing, in a bright, polished or pickled annealed condition. The rod is used for medical, chemical, petroleum, pharmaceutical, electronic and general mechanical parts. Technical Specifications

ASTM F136 Titanium Medical Rod High-quality titanium medical rods available in diameters of 3mm, 4mm, 5mm, 6mm, 8mm, and 10mm, manufactured from Gr5ELI (Gr23) titanium alloy to ASTM F136 standards for medical applications. Product Advantages Titanium alloy is composed of titanium combined with other elements, featuring two crystal structures: α titanium (close-packed hexagonal below 882°C) and β titanium (body-centered cubic above 882°C). Alloying elements are categorized as:

Industry Grade 5 Titanium Rod Ti6Al4V - 20mm, 25mm, 30mm ASTM B348 High-quality Grade 5 titanium rods (Ti-6Al-4V) manufactured in compliance with ASTM B348 standards, available in diameters from 20mm to 30mm and wider range of 5mm to 350mm. Product Specification Details Name Titanium Rod / Titanium Bar Standard ASTM B348, ASTM F136, AMS4928 Grade Titanium Gr5 (Ti-6Al-4V) Diameter 5mm ~ 350mm Certificates ISO9001:2015, Third-party test reports available (SGS, TUV, BV) Shape

GR5 Round Titanium Rod ASTM F136 Annealed Titanium Bar Used For Medical As a leading manufacturer of titanium products for over 16 years, Baoji Lihua has exported medical titanium bar to many countries, including the US, Ukraine, Egypt, Turkey and Russia etc. The quality of our products is widely recognized. So you should have confidence in our company. 1. Product Information A. Standard: ASTM B348,ASTM F67,ASTM F136, AMS 4928. B. Material grade: Grade 1, grade 2, grade 5,

GR2 Round Titanium Rod ASTM B348 Annealed Titanium Bar Used In Industry As a leading manufacturer of titanium products for over 16 years, Baoji Lihua has exported medical titanium bar to many countries, including the US, Ukraine, Egypt, Turkey and Russia etc. The quality of our products is widely recognized. So you should have confidence in our company. 1. Product Information A. Standard: ASTM B348,ASTM F67,ASTM F136, AMS 4928. B. Material grade: Grade 1, grade 2, grade 5,

GR5 Round Titanium Rod ASTM B348 Annealed Titanium Bar Used In Industry As a leading manufacturer of titanium products for over 16 years, Baoji Lihua has exported medical titanium bar to many countries, including the US, Ukraine, Egypt, Turkey and Russia etc. The quality of our products is widely recognized. So you should have confidence in our company. 1. Product Information A. Standard: ASTM B348,ASTM F67,ASTM F136, AMS 4928. B. Material grade: Grade 1, grade 2, grade 5,

TA18 Ti 3Al2.5V Alloy Grade 9 Titanium Bar TA18 titanium alloy is an advanced α-type titanium alloy with a nominal composition of Ti-3A12V. It was developed as a cold processable pipe material. At room temperature and high At temperature, its strength is 209% -50% higher than pure titanium, and its welding performance and cold forming performance are better than TC4 alloy. The maximum operating temperature is about 315 ° C. Although the strength of this alloy is not as high

High Quality Titanium Alloy Bar Gr1 Gr 2 Grade 5 pure titanium/alloy titanium bar / rod price As a leading manufacturer of titanium products for over 16 years, Baoji Lihua has exported medical titanium bar to many countries, including the US, Ukraine, Egypt, Turkey and Russia etc. The quality of our products is widely recognized. So you should have confidence in our company. 1. Product Information A. Standard: ASTM B348,ASTM F67,ASTM F136, AMS 4928. B. Material grade: Grade 1

ASTM B381 F5 F2 titanium rod bar dia 35mm 120mm 185mm L 85mm cold forged 1. Product Information A. Standard: ASTM B348,ASTM B381, AMS 4928. B. Material grade: Grade 1, grade 2, grade 5, grade 9. C. Diameter size in stock: 3mm/6mm/8mm/10mm/20mm/30mm, length: 1000mm-6000mm, or cutting to your needed length D. Product Status: Cold rolled(Y)~Hot rolled(R)~Annealed (M)~Solid Status E. Shape: Round bar, square bar , hex bar F. Feature: 1.Polished surface without any defects free

Dia 5mm 8mm 35mm 50mm titanium round rod square shape gr2 gr5 material 1. Product Information A. Standard: ASTM B348,ASTM F67,ASTM F136, AMS 4928. B. Material grade: Grade 1, grade 2, grade 5, grade 9. C. Diameter size in stock: 3mm/6mm/8mm/10mm/20mm/30mm, length: 1000mm-6000mm, or cutting to your needed length D. Product Status: Cold rolled(Y)~Hot rolled(R)~Annealed (M)~Solid Status E. Shape: Round bar, square bar , hex bar F. Feature: 1.Polished surface without any defects

TA1 gr2 gr5 gr9 titanium rod dia 25mm 40mm 120mm length 3000mm ASTM B381 1. Product Information A. Standard: ASTM B348, ASTM B381, AMS 4928. B. Diameter size in stock: 3mm/6mm/8mm/10mm/20mm/30mm, length: 1000mm-6000mm, or cutting to your needed length C. Shape: Round bar, square bar , hex bar D. Feature: 1.Polished surface without any defects free from cracks no pitting. 2.Two ends flatting making sure length tolerance and good looking. F. Process: Hot forging-hot rolling

High performance Titanium Rod 1000mm 3000mm Gr2 Gr5 Gr9 dia 6mm 50mm 1. Product Information A. Standard: ASTM B348,ASTM F67,ASTM F136, AMS 4928. B. Material grade: Grade 1, grade 2, grade 5, grade 9, grade 23(Gr5 ELI). C. Diameter size in stock: 3mm/6mm/8mm/10mm/20mm/30mm, length: 1000mm-6000mm, or cutting to your needed length D. Product Status: Cold rolled(Y)~Hot rolled(R)~Annealed (M)~Solid Status E. Shape: Round bar, square bar , hex bar F. Feature: 1. Polished surface

Alloy Titanium Round Rod L 1000mm/ 3000mm Gr5,GR7, Gr9 ,Gr12 OD 8mm 35mm As a leading manufacturer of titanium products for over 16 years, Baoji Lihua has exported medical titanium bar to many countries, including the US, Ukraine, Egypt, Turkey and Russia etc. The quality of our products is widely recognized. So you should have confidence in our company. 1. Product Information A. Standard: ASTM B348,ASTM F67,ASTM F136, AMS 4928. B. Material grade: Grade 1, grade 2, grade 5,

Titanium Gr 2 Bar, ASTM B348 Titanium Grade 2 Round Bars, Titanium UNS R50400 Bright Bar, Titanium Gr 2 Hexagonal Bar, Titanium Round Bar, Titanium Alloy Grade 2 Rods Suppliers and Dealer in Baoji, China. Titanium Grade 2 Square Bars is the most generally used and extensively obtainable grade of unalloyed titanium. These Titanium Grade 2 Flat Bars is characteristically used in applications that need higher corrosion resistance in different hostile media. Titanium Grade 2

Gr5 F136 Ti6Al4vELI Titanium rod medical usage 1. Product description Due to the special properties of titanium, such as non-magnetic and affinity with human organs, titanium is widely used in the medical field, human bones and implants.From material selection to processing, in strict accordance with the medical standard ASTM F136, Process: select grade 0 sponge titanium, cast titanium ingots three times, then high-temperature up-draw forging bar stock, hot-rolled or cold

Aerospace 6al4v Titanium rod 5mm 6mm ISO9001 Polished surface Material: GR5 Ti-6Al-4V Specification: titanium rod φ6mm ～ φ30mm × L (rolling) titanium rod φ30mm ～ φ400mm × L (forging) Supply status: Annealing (M) Executive standard: AMS 4928 Test:100% ultrasonic flaw detection,physical performance, mechanical performance and high-magnification metallographic testing, and issue testing report Physical Properties Physical Properties Tensile Strength(min) Yield Strength(min)