Medical Device Testing Equipment

Artificial breast cohesion tester Product introduction: It fully meets the requirements of Appendix D of yy0647-2008 Internal volume 100ml c5.0ml The average surface roughness is 0.2 μ M

Artificial breast fatigue testing machine Product description Executive standard: yy0647-2008 Appendix E requirements Product introduction: It is composed of a fixed plate and a movable plate, the latter is connected with the motor through a connecting arm, so as to introduce alternating motion. The movable plate also includes an adjusting mechanism, which can conveniently change the distance between the movable plate and the fixed plate, so that the implant can be compressed

Positive pressure tester for leakage of infusion set Product introduction: Applicable standards: the medical device sealing tester is a special equipment designed according to the relevant provisions in the national standards for medical devices, which is specially used to test the sealing performance of medical devices. Positive pressure output range: 20KPa ~ 300kPa (adjustable), LED digital display, the error is not more than ± 5%. Keep the positive pressure of the

Sealing tester for medical devices Product introduction: Ym-b sealing tester for medical devices is designed according to the relevant provisions in the national standards for medical devices. It is used to test the sealing performance of infusion sets, blood transfusion sets, infusion needles, anesthesia bag filters, catheters, quick connectors, etc Applicable standards: the medical device sealing tester is a special equipment designed according to the relevant provisions in

Flow parameter tester for infusion pump It is designed and manufactured according to the relevant provisions of YY 0451-2003 disposable infusion pump and YY 0451-2010 disposable portable infusion pump. It is used to measure the average flow rate and instantaneous flow rate of the infusion pump respectively, and display the curve chart of the flow rate and time of the infusion pump. PLC programmable controller, LCD touch screen and Chinese menu are adopted. The test parameters

Dental mobile phone temperature rise tester 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display are adopted. Model, printing, testing, time, calibration. The menu on the LCD is controlled by the keyboard, the data report is output automatically, and the test data is printed on board The temperature rise tester of dental handpiece fully meets the requirements of yy0059. (1.2.3) - 91 yy91044 ～ 91045-99. Temperature error ± 0.5 ℃ Speed: 1000r / min Setting

Dental scaling instrument It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. Nominal specification, test load, printing, testing, uplink, downlink, time, calibration. The menu on LCD screen is controlled by keyboard to automatically record flatness data, average value, maximum value, minimum value, etc.; automatic output of data report, airborne printing test data, fully in line with the provisions of YY / t0274.1-1995 Test torque: 1.5n · M

Dental scaler strength tester It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. Nominal specification, test load, printing, testing, uplink, downlink, time, calibration. The menu on the LCD is controlled by the keyboard, and flatness data, average value, maximum value, minimum value, etc. are recorded automatically; data report is output automatically, and test data is printed on board, which fully conforms to the regulations of YY / t0274.

Dental mobile phone axial beat tester 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display are adopted. Model, printing, testing, time, calibration. The menu on the LCD is controlled by the keyboard, the data report is output automatically, and the test data is printed on board, The axial run out tester of dental mobile phone "fully conforms to the regulations of YY 0059.1-1991 dental mobile phone No.4 dental straight phone, yy0059.2-1991 dental mobile

Dental needle neck strength tester It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. Nominal specification, test deformation, print, test, up, down, time, calibration. The keyboard controls the menu on the LCD screen, automatically controls the deformation, prints the test data on board, and the test is completed automatically, which fully conforms to the regulations of yy0302-1998 and yy0761-2009. Force measuring range: 0.01-40n, the error

Dental handpiece clamping cutting tool performance tester It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. Nominal specification, test load, print, test, uplink, downlink, time, calibration. The keyboard controls the menu on the LCD screen to display the pulling force and rotating torque, and automatically outputs the data report and prints the test data on board. It is completely in accordance with yy0059. (1.2.3) - 91 and yy91044-91045

Laser measuring instrument for radial runout of dental handpieces It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. Model, print, test, time, calibration. The menu on the LCD is controlled by the keyboard, the data report is output automatically, and the test data is printed on board. The measurement range is 0.002 ~ 1.000mm, and the accuracy is ± 0.002mm Test method: laser ranging It fully complies with yy0059. (1.2.3) - 91 and yy1045-2009

Dental handpiece temperature rise tester It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. Model, print, test, time, calibration. The menu on the LCD is controlled by the keyboard, the data report is output automatically, and the test data is printed on board. The temperature rise tester of dental handpiece fully meets the requirements of yy0059. (1.2.3) - 91 yy91044 ～ 91045-99. Temperature error ± 0.5 ℃ The rotational speed is 1000r / min

Grinding performance tester It adopts 5.7 inch (120 × 90) PLC color LCD screen and Chinese menu operation. Nominal specifications, test items, print, test, uplink, downlink, time, calibration. The menu on the LCD screen is controlled by the keyboard, and the test results are printed on board. Test time setting: 1s ~ 10h Two types of dental handpieces can be installed Configuration weight: 1n 2n 5N Equipped with dust cover Equipped with water box Net weight: 11kg overall

Dental handpiece vibration tester It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. Model, print, test, time, calibration. The menu on the LCD is controlled by the keyboard, the data report is output automatically, and the test data is printed on board The dental handpiece vibration tester is in accordance with yy0059. (1.2.3) - 91 yy91044yy91045-99. Partial list: 1. One main machine 2. 1 roll of printing paper 3. A set of fixture 4. A set

Dental chair bearing capacity tester It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. Nominal specification, test load, print, test, uplink, downlink, time, calibration. The menu on the LCD screen is controlled by the keyboard to automatically record flatness data, such as average value, maximum value, minimum value, etc.; the automatic output data report, airborne printing test data, dental chair bearing capacity tester fully conforms to

Surface roughness tester Environmental Science: Working temperature: - 10 ～ 40 ℃ Relative humidity: 45% - 80% Power supply voltage: 220 V ± 22 V Power grid frequency: 50 Hz ± 1 Hz Equipment power: 1500W It adopts 5.7 inch (120 × 90) PLC (delta) LCD multi-color screen Chinese menu display; (1) The automatic feeding system is designed to continuously feed at least 100 pieces each time, and the test space is fully automatic; (2) The feeding system can communicate with measuring

Compression force attenuation and compression force tester of intraocular lens Electronic balance type totally enclosed test. It is used to measure the residual pressure of intraocular lens within a prescription diameter under the standard state within a specified time. It is fully in accordance with the relevant standards of yy0290-2008. Water bath temperature control box: temperature regulation - 10 ~ 30 degrees Accuracy: ± 0.1mn It is equipped with a variety of span block

Dynamic fatigue durability tester for intraocular lens Simple sine wave: It adopts 5.7 inch (120 × 90) single color LCD screen and Chinese menu display. Nominal specification, test load, print, test, uplink, downlink, time, calibration. The keyboard controls the menu on LCD screen, such as average value, maximum value, minimum value, etc. It is used for fatigue test of test loop plus periodic compression load. Standard sine wave: It is controlled by computer and loaded by

Slip performance tester for cartridge bottle leakage performance It adopts 5.7 inch (320 × 240) single color LCD touch screen and Chinese menu display. The keyboard can select the specifications of the cartridge bottle, display and print the record chart of the maximum force, starting force, re starting force, the driving force required by the piston in the whole process of the internal wall movement of the cylinder and the displacement of the piston. LCD: made in Taiwan.