Medical Device Testing Equipment

① Cylinder requirements: round, stroke 6cm, pressure of 0.3 ~ 0.7MPa, speed of 10 mm / s,, The length of the pipe is 105mm (current cylinder: 105mm in shape, 60mm in stroke; Brand: Yadeke, J / no PC 0214, max. press. 9.9kgf/cm2 psi) Outer diameter: 15mm, disposable intravenous indwelling needle (Draft for comment). ② Timing resolution: 0.01s, 0-60min adjustable, size: 400 × 290 × 240 (mm) Technical parameters: 2.1 environment: Working temperature: 5-40 ℃ Relative humidity: 45

5.7 inch (120 × 90) single color LCD touch screen is adopted, and Chinese menu is displayed. Nominal specification, needle body classification, test load, printing, testing, uplink, downlink, time, calibration. The menu on the LCD is controlled by the keyboard, the pull force is loaded automatically, the data is recorded automatically, the data report is output automatically, and the test data is printed on board Nominal specification: the nominal specification can be

5.7 inch (320 * 240) liquid crystal display and Chinese menu display are adopted. It adopts digital closed-loop control, AD acquisition speed is 50KHz, internal code is 100000; high precision clock chip, power-off storage; MCU control dynamic display of loading force value; overload alarm shutdown protection; nominal specification, test, uplink, downlink, time, calibration. It can communicate with the upper computer to facilitate the processing of experimental data, control

5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display are adopted. Nominal specification, test load, printing, testing, uplink, downlink, time, calibration. The keyboard controls the menu on the LCD screen, prints the test data on board, and displays the thrust and test time (displacement) curve in real time. This machine is mainly used to test the maximum thrust of the safety syringe core rod end and the syringe top, which is beneficial for the R & D

5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display are adopted. Nominal specification, test load, printing, testing, uplink, downlink, time, calibration. The keyboard controls the menu on the LCD screen, prints the test data on board, and displays the thrust and test time (displacement) curve in real time. This machine is mainly used to test the maximum thrust of the safety syringe core rod end and the syringe top, which is beneficial for the R & D

Bending Resistance Tester Of Guide Wire It adopts 6-inch (120 × 90) single color LCD and Chinese menu display. With nominal specifications, test times, printing, testing, uplink, downlink, time and other parameters. The menu on the LCD is controlled by the keyboard, and the tested guide wire is bent and straightened in reverse automatically, and the test results are printed on board. The guide wire bending resistance tester yy0450-g fully meets the requirements of the guide

Guide wire connection strength tester 5.7 inch (120 × 90) single color LCD touch screen is adopted, and Chinese menu is displayed. Nominal specification, test times, left-hand, right-hand, time, calibration. The menu on the LCD is controlled by the keyboard, and the test data is printed on board. The guide wire connection strength tester fully meets the test requirements of yy0450.1-2003 "disposable sterile intravascular catheter accessories Part I guide apparatus". Test

Medical forceps firmness tester 5.7-inch (320 × 240) single color LCD touch screen is adopted, and Chinese menu is displayed. Nominal specification, test load, printing, testing, uplink, downlink, time, calibration. The menu on the LCD is controlled by the keyboard, and the results are automatically judged; the data report is automatically output, and the test results are printed on board. The product fully conforms to the Appendix C of YY / t0686-2017 Moving distance: 0-300

Medical forceps head end swing meter 5.7 inch (320 × 240) single color liquid crystal display is adopted and Chinese menu is displayed. Nominal specification, test load, printing, testing, uplink, downlink, time, calibration. The menu on the LCD screen is controlled by the keyboard, and the deformation data, average value, maximum value, minimum value, etc. are recorded automatically; the data report is output automatically, the test data is printed on board, and the

Pre filling syringe connection force tester 5.7 inch (120 × 90) single color LCD touch screen is adopted, and Chinese menu is displayed. Nominal specification, test load, printing, testing, uplink, downlink, time, calibration, airborne printing test data, real-time display of loading force and test time (displacement) curve, automatic judgment of product conformity. Ybb0011-ljl pre filling connection force tester fully complies with the relevant provisions of ybb00112004-2015

Shear force tester for medical scissors 5.7 inch (320 × 240) single color LCD touch screen is adopted, and the tester is equipped with PLC programmable controller and force measuring mechanism. Transmission mechanism, fixture and printer. The shear force tester for medical scissors is designed and manufactured in full compliance with the relevant provisions of YY / T 0176-2006 general technical conditions for medical scissors (iso7741). It is a special testing equipment for

Medical suture needle cutting force tester Cutting force tester for medical suture needle edge sharpness test for triangular edge of suture needle 5.7-inch (120 × 90) LCD is used, and Chinese menu is displayed. Nominal specification, test load, printing, testing, uplink, downlink, time, calibration. The menu on the LCD is controlled by the keyboard, the cutting force is loaded automatically, the data report is output automatically, and the test data is printed on board.

Positive pressure tester for leakage of infusion set 5.7-inch (120 × 90) LCD touch screen is adopted, and Chinese menu is displayed. The test results can be printed out by the on-board printer. Sz8368-c infusion set leakage positive pressure tester is designed and manufactured in full compliance with the relevant provisions of GB8368 disposable infusion set, gravity infusion type standard. The pressure output value can be set arbitrarily, and the calibration error is not more

Plastic handle surgical hook assembly firmness tester 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display are adopted. It adopts digital closed-loop control, AD acquisition speed is 500KHz, internal code is 1 million; high precision clock chip, power-off storage; PLC programmable control, dynamic display of loading force value; overload alarm shutdown protection. Nominal specification, applied load, test time, test times, uplink, downlink, time,

Slide performance tester for medical indwelling needle 5.7 inch (120 × 90) single color LCD touch screen is adopted, and Chinese menu is displayed. Nominal specification, pipe length, test times, uplink, downlink, time, calibration. The menu on the LCD is controlled by the keyboard, and the test data is printed on board. Real time display of starting force, average force, maximum force, minimum force, moving distance and force of needle body. Nominal specification: the

Reliability tester of catheter balloon Catheter tester catheter balloon reliability tester catheter balloon tester 1. 5.7 inch (120 × 90) single color liquid crystal display is adopted and Chinese menu is displayed. Nominal specification, test load, printing, testing, uplink, downlink, time, calibration. The menu on the LCD is controlled by the keyboard, and flatness data, average value, maximum value, minimum value, etc. are recorded automatically; data report is output

Conduit flow tester 5.7-inch (320 * 240) LCD touch screen is adopted, and Chinese menu is displayed. AD acquisition speed is 500KHz, internal code is 1 million; high precision clock chip, power-off storage; PLC control; overload alarm shutdown protection; nominal specification, printing, testing, time. The menu on the LCD screen is controlled by the keyboard to display the measured value and average value in real time, to automatically judge whether it is qualified or not, to

Flatness tester of contraceptive device 5.7 inch (320 × 240) single color LCD touch screen and Chinese menu display are adopted. Nominal specification, test load, printing, testing, uplink, downlink, time, calibration. The menu on the LCD is controlled by the keyboard, and the deformation data, average value, maximum value, minimum value, etc. are recorded automatically; the data report is output automatically, and the test data is printed on board. The planeness tester

Medical leakage current tester Performance characteristics ■ true RMS AC / DC conversion ■ measuring frequency width up to 1MHz Technical indicators Lk2680c medical leakage tester leakage current test output voltage 0～250V ±5% Leakage current range AC:0～2/20mA ±5% Transformer capacity 500VA Test time 1～99s size W×H×D:375mm×195mm×280mm weight 10kg Standard accessories --------------

Puncture force tester of medical injection needle A 5.7-inch (120 × 90) single color LCD touch screen and Chinese menu display are used in the needle puncture force simulation skin tester. Nominal specification, pipe wall, test times, pressurization, upward, downward, time, calibration. The menu on the LCD is controlled by the keyboard, and the test data is printed on board. Real time display of puncture force and peak force data can display puncture force and five peak