Fiber Optical Switches

1x2 Optical Switches Gezhi Optical Swiches ,It features excellent mechanical and optical performance and unify different switch configuration of 1x1, 1x2, 2x2 Bypass, 2x2, Dual 1x2, Dual 2x2 Bypass, Dual 2x2 onto the similar compact package. It is an ideal component for OADM,OXC,system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system. Features Fail-Safe Latching Unmatched Low Cost Low Optical

1625/1650nm Mechanical Optical Switch Low Crosstalk 1x1 FC APC 1x1 Optical Switches 1x1 Mechanical Optical Switch is used to turn on and turn off optical signal. The 1x1 Mechanical Optical Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical network in near future. Features Highly Stable & Reliable Short switching time Compact design, Miniature size

Features Fail-Safe Latching Unmatched Low Cost Low Optical Distortions Epoxy-Free Optical Path High Reliability Applications Channel Blocking Configurable Add/Drop System Monitoring Instrumentation Specification Parameters Specifications Unit Operating Wavelength 1260~1620(SM) nm Insertion Loss ≤1.0 dB Wavelength Dependent Loss ≤0.25 dB Polarization Dependent Loss ≤0.05 dB Temperature Dependent Loss ≤0.20 dB Return Loss SM≥50 dB Cross Talk SM≥55 dB Switch Time ≤8 ms

Blocked Latching Mechanical Optical Switch 1x1 Opto-Mechanical Bi-directional Fiber Optic Switch with 1310nm wavelength, LC connectors, UPC/APC interfaces, 3V/5V operation, and 500mW optical power rating. Product Overview Gezhi 1x1 Opto-Mechanical Bi-directional Fiber Optic Switch connects optical channels by redirecting incoming optical signals into output fibers using an opto-mechanical configuration activated via electrical control signals. The switch features integrated

Dual Relay Switch D1x2 Mechanical Optical Switches Double Pole Double Throw GEZHI Dual 1x2 Optical Switches configurate by Six fibers and two states also called 2x4 Fiber Optical Switch. It connect with LC/UPC connector and with Non-latched type. GEZHI Duplex 1x2 Opto-mechanical switches connects optical channels by redirecting an incoming optical signal into a selected output fiber. The D1x2 mechanical Optical Switches is apllication in R&D in laboratory, Metropolitan Area

1x1 Single Pole Single Throw Optical Cut off Switch GEZHI's 1x1 Optical Cut off switch is designed for use in optical fiber communication networks and measurement instruments. The 1x1 optical cut off switch consists of two ports that selectively transmits, redirects, or blocks optical power in a fiber optic transmission line. The 1x1 optical cut off switch actuated to select or change between two states. As a result, it consumes low electric energy to operate the optical

OSW-1x8 Multimode MM 850nm Multipath Optical Switches with MPO Connector The OSW-1x8 Multipath Optical Switch is designed to meet the most demanding switching requirements of continuous operation without failure, longevity, operation under shock/vibration environment and large temperature variations. Features High Stability, High Reliability Epoxy-free on Optical Path Wide Wavelength Range Low Crosstalk Applications OXC OADM System Monitoring R&D in Laboratory GEZHI 1x8

OSW-1x48 Multipath Routing Optical Switch 1x48 channel LC/APC connector The OSW-1x48 Multipath Optical Switch is designed to meet the most demanding switching requirements of continuous operation without failure, longevity, operation under shock/vibration environment and large temperature variations. It is an ideal component for OADM,OXC,system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system.

1310/1550nm Full 2×2 SM Fiber Optical Switch Bidirectional The 2x2F Optical Switches of GEZHI Photonics Co.,Ltd connects optical channels by redirecting an incoming optical signal into a selected output fiber. Its used in Channel Blocking, Configuration add/drop solution with low optical distortions and high reliability. These 2x2 bidirectional optical switches, which have two inputs and two outputs, with Through and Cross optical state. Features High Reliability Unmatched

4x4 Industrial Bypass Mechanical Fiber Optical Switch GEZHI Photonics Co.,Ltd 's 4x4 Industrial Bypass Mechanical Fiber Optical Switch is designed to provide cross-connect and bypass function between Input and Output channels. It offers excellent insertion loss, repeatability and a wide operating temperature range and suitable for all bi-directional protection switching applications . The 4x4 Industrial Bypass Mechanical Fiber Optical Switch provides excellent performance on

850nm MM Dual 2x2 Bypass Fiber Optical Switch GEZHI Photonics Co.,Ltd 's Dual 2x2 Bypass Fiber Optical Switch is designed to provide cross-connect and bypass function between Input and Output channels. Its working at 850nm wavelength. (1260~1650nm, 780nm and customized wavelength is available. It offers excellent repeatability, insertion loss and a wide operating temperature range. Features Low insertion loss Excellent repeatability Low crosstalk Low polarization dependent

Blocked Dual 1x1 Optical Switches for Channel Blocking The Dual 1x1 Optical Switches of GEZHI Photonics Co.,Ltd also means 2x2 Full mechanical Fiber optical switch, its with Through and Cross optical state. Its used in Configuration add/drop solution, Channel Blocking, wth high reliability and low optical distortions . Features Fail-Safe Latching Unmatched Low Cost Low Optical Distortions Epoxy-Free Optical Path High Reliability Applications Channel Blocking Configurable Add

Blocked 2x2 Single Optical Bypass Switch in Optical Netrwork Protection/Restoration The Blocked 2x2 Single optical Bypass Switch of GEZHI Photonics Co.,Ltd , the optical path through the units is purely optical; i.e. there is no optical to electrical to optical conversion. There is no electrical loss or electrical bandwidth limit on the fiber optic path. The optical path will redirecting an incoming optical signal into a selected output fiber. The 2x2 optical bypass switch

Through & Cross Non-Blocked Full 2x2 Optical Switches The Full 2x2 Optical Switches of GEZHI Photonics Co.,Ltd with Through and Cross optical state. Its used in Channel Blocking, Configuration add/drop solution with low optical distortions and high reliability. Features Unmatched Low Cost Low Optical Distortions Fail-Safe Latching High Reliability Epoxy-Free Optical Path Applications Channel Blocking System Monitoring Instrumentation Configurable Add/Drop Specification

4x4 Industrial type Mechanical Fiberoptic Switch The 4x4 Industrial type Mechanical Fiberoptic switch of GEZHI Photonics Co.,Ltd utilizes fiber-to-fiber technology to achieve ultra low losses and crosstalk. It is an components for 10 /1Gbps fiber Gigabit Ethernet networks. It is suitable for all bi-directional protection switching applications . The 4x4 industrial fiberoptic switch provides excellent performance on your network and posses the advantages of compact and

1742nm wavelength 1x4 optical switch for Gas detection sensor The 1x4 Optical Switch of GEZHI Photonics Co.,Ltd , which with 1742nm wavelength. Its feature high level of performance required for Gas detection sensor. They are also highly suitable for applications in telecommunications, R&D in laboratory, and test environments, because of their low IL and excellent repeatability. The 1x4 optical switch is bi-directional connects optical channel by directing or blocking an

SM Fiber Optic 1x32 Switch The SM fiber Optic 1x32 Switch from GEZHI Photonics Co.,Ltd provides channel selection between a single input and N output fibers. The output channel number is customer specified and it can be 1x8, 1x16, 1x32 or others. It comes with the paralled interface (TTL) and drive circuit breakdown self-checking function. This 1x32 optical switch can be OEM. Its is based on our advanced fiber optics technology which has good repeatability, low insertion loss

2x2 Cross / Bar Mechanial Optical Switch Module GEZHI Photonics Co.,Ltd 's 2x2 Optical switch is a cross-bar switch. It has two by two (2x2) ports. The switch changes the connection of the optical signal ports between the state of cross and bar simultaneously. This device has wide application in configurable OADM, optical metropolitan area networks, or in testing/monitoring equipment. The 2x2 cross / bar optical Switches with single mode fiber (9/125 micron) or multimode

Non-Blocking 4x4 Optical Bypass Switches Dual 2x2 Mechanical Optical Switch GEZHI Photonics Co.,Ltd 's 4x4 optical switch is designed to provide cross-connect and bypass function between Input and Output channels. It offers excellent insertion loss, repeatability and a wide operating temperature range. Features Low insertion loss Excellent repeatability Low crosstalk Low polarization dependent loss Wide passband Applications Redundancy switching Optical monitoring systems

Fiberoptic Switches 1x3 / 3x1 Latching Optical Switch device GEZHI’s Fiberoptic Switches 1x3 / 3x1 Latching Optical Switch device support all wavelength at 1260nm~1650nm or 850nm Multimode wavelength, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for Optical Network, Protection, Transmitter and Receiver Protection,Network Test System and Instrumentations. Features