Fiber Optical Switches

wholesale 2x2B Bypass mechanical Fiber Optical Switch 3-port 10/100M Industrial Switch /Media Converter, with 2x RJ45 ports and 1x optical fiber Uplink port. Rail-type installation. Features Industrial design, 2x 10/100M Ethernet RJ45 ports with AutoUplink™ and 1x 100M optical port Supports IEEE802.3x flow control for Full-duplex Mode and back pressure for Half-duplex Mode RJ-45 port supports Auto MDI/MDI-X Automatic MAC address learning and aging Auto-Negotiation for Full

3 port 10/100M Industrial Switch/Media Converter,2xRJ45 ports,1x Optical fiber Uplink port, wholesale 2x2B Bypass mechanical Fiber Optical Switch 3-port 10/100M Industrial Switch /Media Converter, with 2x RJ45 ports and 1x optical fiber Uplink port. Rail-type installation. Features Industrial design, 2x 10/100M Ethernet RJ45 ports with AutoUplink™ and 1x 100M optical port Supports IEEE802.3x flow control for Full-duplex Mode and back pressure for Half-duplex Mode RJ-45 port

1*2 850/1260nm Mechanical Fiber Optic Switch Module 1x2 Optical Switches This Optical switch configurate by 1x2 type with Three fibers and two states which connects optical channels by redirecting an incoming optical signal into a selected output fiber. Its working with Singlemode wavelength 1260~1650nm or Multimode 850/1310nm. This is using a opto-mechanical proprietary configuration and activated via an electrical control signal. GEZHI 1x2 mechanical Fiber Optical Switch

high channel isolation 1x4 medichanical optical switch module Product View 1×4 Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical

reliable optical switch module with high isolation optic switch gigabit fiber switch high channel isolation 1x4 medichanical optical switch module Product View 1×4 Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for

wholesale 2x2B Bypass mechanical Fiber Optical Switch 3-port 10/100M Industrial Switch /Media Converter, with 2x RJ45 ports and 1x optical fiber Uplink port. Rail-type installation. Features Industrial design, 2x 10/100M Ethernet RJ45 ports with AutoUplink™ and 1x 100M optical port Supports IEEE802.3x flow control for Full-duplex Mode and back pressure for Half-duplex Mode RJ-45 port supports Auto MDI/MDI-X Automatic MAC address learning and aging Auto-Negotiation for Full

4x4 Min-single Mode Fiber Optical Isolator 4x4 Optical Switches GEZHI Photonics’ 4×4 Mechanical Fiber Optic Switch (4×4 Optical Switch) support all wavelength at 1260nm~1650nm or 850nm Multimode wavelength, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for Optical Network, Protection, Transmitter and Receiver Protection,Network Test System and Instrumentations. Features

high channel isolation 1x4 medichanical optical switch module Product View 1×4 Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical

1625/1650nm Mechanical Optical Switch Low Crosstalk 1x1 FC APC 1x1 Optical Switches 1x1 Mechanical Optical Switch is used to turn on and turn off optical signal. The 1x1 Mechanical Optical Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical network in near future. Features Highly Stable & Reliable Short switching time Compact design, Miniature size

4x4 Min-single Mode Fiber Optical Isolator 4x4 Optical Switches GEZHI Photonics’ 4×4 Mechanical Fiber Optic Switch (4×4 Optical Switch) support all wavelength at 1260nm~1650nm or 850nm Multimode wavelength, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for Optical Network, Protection, Transmitter and Receiver Protection,Network Test System and Instrumentations. Features

wholesale 2x2B Bypass mechanical Fiber Optical Switch 3-port 10/100M Industrial Switch /Media Converter, with 2x RJ45 ports and 1x optical fiber Uplink port. Rail-type installation. Features Industrial design, 2x 10/100M Ethernet RJ45 ports with AutoUplink™ and 1x 100M optical port Supports IEEE802.3x flow control for Full-duplex Mode and back pressure for Half-duplex Mode RJ-45 port supports Auto MDI/MDI-X Automatic MAC address learning and aging Auto-Negotiation for Full

1625/1650nm Mechanical Optical Switch Low Crosstalk 1x1 FC APC 1x1 Optical Switches 1x1 Mechanical Optical Switch is used to turn on and turn off optical signal. The 1x1 Mechanical Optical Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical network in near future. Features Highly Stable & Reliable Short switching time Compact design, Miniature size

high channel isolation 1x4 medichanical optical switch module Product Technical Parameters Descriptions Model Number GZ-1x1-13/15XX Fiber type MMF Form Factor Dual SFP+ Data Rate 10Gbps Wavelength 850nm Distance 300m Sensitivity

wholesale 2x2B Bypass mechanical Fiber Optical Switch 3-port 10/100M Industrial Switch /Media Converter, with 2x RJ45 ports and 1x optical fiber Uplink port. Rail-type installation. Features Industrial design, 2x 10/100M Ethernet RJ45 ports with AutoUplink™ and 1x 100M optical port Supports IEEE802.3x flow control for Full-duplex Mode and back pressure for Half-duplex Mode RJ-45 port supports Auto MDI/MDI-X Automatic MAC address learning and aging Auto-Negotiation for Full

high channel isolation 1x4 medichanical optical switch module Product Technical Parameters Descriptions Model Number GZ-1x1-13/15AA Fiber type MMF Form Factor Dual SFP+ Data Rate 40Gbps Wavelength 850nm Distance 300m Sensitivity

1625/1650nm Mechanical Optical Switch Low Crosstalk 1x1 FC APC 1x1 Optical Switches 1x1 Mechanical Optical Switch is used to turn on and turn off optical signal. The 1x1 Mechanical Optical Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical network in near future. Features Highly Stable & Reliable Short switching time Compact design, Miniature size

1*2 850/1260nm Mechanical Fiber Optic Switch Module 1x2 Optical Switches This Optical switch configurate by 1x2 type with Three fibers and two states which connects optical channels by redirecting an incoming optical signal into a selected output fiber. Its working with Singlemode wavelength 1260~1650nm or Multimode 850/1310nm. This is using a opto-mechanical proprietary configuration and activated via an electrical control signal. GEZHI 1x2 mechanical Fiber Optical Switch

4x4 Min-single Mode Fiber Optical Isolator 4x4 Optical Switches GEZHI Photonics’ 4×4 Mechanical Fiber Optic Switch (4×4 Optical Switch) support all wavelength at 1260nm~1650nm or 850nm Multimode wavelength, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for Optical Network, Protection, Transmitter and Receiver Protection,Network Test System and Instrumentations. Features

1*2 850/1260nm Mechanical Fiber Optic Switch Module 1x2 Optical Switches This Optical switch configurate by 1x2 type with Three fibers and two states which connects optical channels by redirecting an incoming optical signal into a selected output fiber. Its working with Singlemode wavelength 1260~1650nm or Multimode 850/1310nm. This is using a opto-mechanical proprietary configuration and activated via an electrical control signal. GEZHI 1x2 mechanical Fiber Optical Switch

Product Description: 1x4S 105/125um fiber Optical Switch for Fiber Sensor 1x4S Optical Switch This 1x4S Optical Switches from GEZHI Photonics is used 105/125um large core fiber. Which support 780nm, 850nm, 980nm, 1060nm, 1310nm, 1550nm or customized wavelength. The 105/125um fiber 1x4 Optical Switches is with Low insertion loss, High stability and Reliability and High Cross talk. Which widely used in Medical, Fiber sensor, Research, Laser and Aerospace etc. Features ◆Low