TZM Alloy

Molybdenum Alloy TZM Plate Components Applied As Functional Material Description: TZM alloy is Titnaium-Zirconium-Molybdenum Alloy and it is one of commonly used high temperature molybdenum alloy. TZM alloy has good mechanical properties, especially at high temperature. Physical performance comparison between TZM alloy and Pure Molybdenum Material Density (g/cm3) Melting Point(℃) boiling point(℃) TZM (Ti0.5/Zr0.1) 10.22 2617 4612 Mo 10.29 2610 5560 Mechanical property (TZM)

Description: Product name: TZM Molybdenum Plate Standard: ASTM B387 Material: Ti0.5%-Zi0.08%-0.02% Carbon -Moly balance Density: 10.1g/cc TZM Molybdenum plate is an alloy of 0.50% Titanium, 0.08% Zirconium and 0.02% Carbon with the balance Molybdenum. TZM Molybdenum plate is manufactured by either P/M or Arc Cast technologies and is of great utility due to its high strength/high temperature applications,

Molybdenum Alloy TZM Seamless Crucibles High Temperature And Wear Resistance TZM is a molybdenum based alloy with titanium and zirconium as alloying elements. At present, TZM (mo-0.5% ti-0.008% Zr) and TZC (mo-1.25% ti-0.15% zr-0.15% carbon) are widely used. When the temperature exceeds 1300 ° C, the strength of TZM is twice that of pure molybdenum. The recrystallization temperature of TZM is about 250'c higher than that of molybdenum, and it has better welding performance.

High Temperature Vacuum Furnace TZM Alloy & Mo-La Alloy Description: Standard: ASTM B387 Material: Ti0.5%-Zi0.08%-0.02% Carbon -Moly balance Density: 10.1g/cc Chemical Composition: TZM: Mo + 0.40-0.55%Ti + 0.06-0.12%Zr + 0.01-0.04% C Mo_La:Generally: La2O3:0.4%-0.7% Specification: According to customer's requirements TZM is a particle-strengthened molybdenum based alloy containing titanium, zirconium and carbon.TZM is widely used in the aerospace, aviation and other

ASTM B387 TZM Customized Processing parts for Electric Vacuum Device Description: Standard: ASTM B387 Material: Ti0.5%-Zi0.08%-0.02% Carbon -Moly balance Density: 10.1g/cc TZM is an alloy of 0.50% Titanium, 0.08% Zirconium and 0.02% Carbon with the balance Molybdenum. TZM is manufactured by either P/M or Arc Cast technologies and is of great utility due to its high strength/high temperature applications, especially above 2000'F. TZM alloy has a higher recrystallization

TiZrMo Molybdenum Alloy TZM Bar With 10.22 g/cm3 Density Introduction of TZM alloy TZM rod is a superalloy prepared by adding elements such as Ti, Zr and C into molybdenum matrix. It has good high-temperature properties, mechanical properties and other good characteristics, including high melting point, high strength, high elastic modulus, low coefficient of linear expansion, low vapor pressure, good electric and thermal conductivity, strong corrosion resistance and good high

ASTM B387 High Strength TZM Sheet Plate Molybdenum Alloy with good welding performance Description: Standard: ASTM B387 Material: Ti0.5%-Zi0.08%-0.02% Carbon -Moly balance Density: 10.1g/cc TZM is an alloy of 0.50% Titanium, 0.08% Zirconium and 0.02% Carbon with the balance Molybdenum. TZM is manufactured by either P/M or Arc Cast technologies and is of great utility due to its high strength/high temperature applications, especially above 2000'F. TZM alloy has a higher

TZM Molybdenum Alloy Rod Description: Standard: ASTM B387 Material: Ti0.5%-Zi0.08%-0.02% Carbon -Moly balance Density: 10.1g/cc TZM is an alloy of 0.50% Titanium, 0.08% Zirconium and 0.02% Carbon with the balance Molybdenum. TZM is manufactured by either P/M or Arc Cast technologies and is of great utility due to its high strength/high temperature applications, especially above 2000'F. TZM alloy has a higher recrystallization temperature, higher strength, hardness and good

Description: Standard: ASTM B387 Material: Ti0.5%-Zi0.08%-0.02% Carbon -Moly balance Density: 10.1g/cc TZM is an alloy of 0.50% Titanium, 0.08% Zirconium and 0.02% Carbon with the balance Molybdenum. TZM is manufactured by either P/M or Arc Cast technologies and is of great utility due to its high strength/high temperature applications, especially above 2000'F. TZM alloy has a higher recrystallization

TZM Molybdenum Alloy Tfor X-ray Tube Rotating Anode Target Description: Standard: ASTM B387 Material: Ti0.5%-Zi0.08%-0.02% Carbon -Moly balance Density: 10.1g/cc TZM is an alloy of 0.50% Titanium, 0.08% Zirconium and 0.02% Carbon with the balance Molybdenum. TZM is manufactured by either P/M or Arc Cast technologies and is of great utility due to its high strength/high temperature applications, especially above 2000'F. TZM alloy has a higher recrystallization temperature,

TZM Molybdenum Alloy Special-Shaped Machined Plates With Ground Surface Specification: Product Name Vacuum Furnace TZM Molybdenum Alloy Plates Material Ti0.5%-Zi0.08%-0.02% Carbon -Moly balance Density 10.1g/cc Thickness >=0.3mm Width

ASTM B387 TZM Molybdenum Alloy Sheet Heat Shield for High Temperature Furnace Description TZM alloy is the most outstanding molybdenum alloy high temperature material at present. It is a solid solution hardening and particle strengthened molybdenum alloy. TZM is harder than pure molybdenum metal, and has higher recrystallization temperature and better creep resistance degeneration. The recrystallization temperature is about 1400℃, far higher than that of Mo, can provide

ASTM B387 TZM Molybdenum Alloy Sheet Heat Shield for High Temperature Furnace Description TZM alloy is the most outstanding molybdenum alloy high temperature material at present. It is a solid solution hardening and particle strengthened molybdenum alloy. TZM is harder than pure molybdenum metal, and has higher recrystallization temperature and better creep resistance degeneration. The recrystallization temperature is about 1400℃, far higher than that of Mo, can provide

Molybdenum Alloy TZM CNC Machining Lathing Vacuum Device PartsDescription:Titanium zirconium molybdenum rod (TZM rod) is prepared by powder metallurgy. TZM is one of commonly used high temperature molybdenum alloy. TZM alloy has good mechanical properties, especially at high temperature. It has good high-temperature properties, mechanical properties and other good characteristics, including high melting point, high strength, high elastic modulus, low coefficient of linear

Molybdenum Alloy TZM Round Disk/Special Parts With 10.22 g/cm3 Density Introduction of TZM alloy TZM is a superalloy prepared by adding elements such as Ti, Zr and C into molybdenum matrix. This alloy contains 99.2% min. to 99.5% max. of Mo, 0.50% Ti and 0.08% Zr with a trace of C for carbide formations. TZM offers twice the strength of pure moly at temperatures over 1300℃. The recrystallization temperature of TZM is approximately 250℃ higher than moly and it offers better

TZM Molybdenum Alloy Plates in Vacuum Furnace Supplier Description: Product name: TZM Molybdenum Plate Standard: ASTM B387 Material: Ti0.5%-Zi0.08%-0.02% Carbon -Moly balance Density: 10.1g/cc TZM Molybdenum plate is an alloy of 0.50% Titanium, 0.08% Zirconium and 0.02% Carbon with the balance Molybdenum. TZM Molybdenum plate is manufactured by either P/M or Arc Cast technologies and is of great utility due to its high strength/high temperature applications, especially above

Customized 99.95% Pure High Temperature TZM Molybdenum Boats / TZM Alloy Boats Content Analysis of molybdenum boat (MO≥ 99.95%) Si

99.95% High Purity TZM Molybdenum Alloy Pipe / TZM Alloy Pipe TZM molybdenum alloy It is a fine product with gray metallic luster. Density is better than 10.2g/cm3, used for glass industry. It can serve a long life in glass solution at 1300. It also can be used in the fields of rare earth industry. Main Element Content (%): Mo 99.95, Al 0.001, Ca 0.003, Cr 0.005, Cu 0.001, Fe 0.005, Pb 0.002 Application refractory Shape Tubular Material molybdenum Dimensions 25-340,L100-650mm

240HV Hardness TZM Alloy Welding Electrodes on Sale Description: Product name: TZM Molybdenum electrodes Standard: ASTM B387 Material: Ti0.5%-Zi0.08%-0.02% Carbon -Moly balance Density: 10.1g/cc Chemical composition of TZM alloy Element Ti Zr C Mo Content, % 0.4-0.5 0.08-0.12 0.01-0.04 balance TZM is an alloy of 0.50% Titanium, 0.08% Zirconium and 0.02% Carbon with the balance Molybdenum. TZM has great utility due to its high strength/high temperature applications, especially

High Temperature Structural and Functional Material TZM Molybdenum Alloy Components for Industrial Piercing Description of TZM Molybdenum Alloy Components: A kind of Molybdenum Alloy which has excellent high temperature properties formed by solution strengthening and carbide dispersion strengthening of Titanium, Zirconium and Carbon in Molybdenum. TZM molybdenum alloy, as a high temperature structural and functional material, is widely used to make high temperature components