Hydraulic Crimping Tools

Powered Hydraulic Portable Reinforced Manual Steel Bar Cable Cutter Bar Cable Cutter Application It is strictly forbidden to press shear when there is no work piece. Bar Cable Cutter Specificaitons Item number 16200A 16200B 16200C 16200D 16200E Model HP-16 HP-22 HP-25 HP-27 CPC-32 Cutting force 120KN 160KN 190KN 220KN 250KN Cutting range Φ4-Φ16mm Φ4-Φ22mm Φ4-Φ25mm Φ4-Φ27mm Φ4-Φ32mm Length appro.420mm appro.500mm appro.520mm appro.550mm appro.370mm Weight N.W2.8KG G.W4K N.W4

Model SWG-25 Portable Electric Hydraulic Pipe Bender Manual Bar Bender Portable Electric Hydraulic Pipe Bender Application SWG-25 Portable manual hydraulic busbar bender, pipe bender is applicable to the general water pipe, conduit, gas pipe, carbon steel pipe, bending angle with 90., it can be shaped 90º one time. The mold is made of aluminum alloy or solid ball cast iron. Portable Electric Hydraulic Pipe Bender Specification Item number 06250 06250-1 06250-2 06250-3 06250-4

Model CB-125D Portable Electric Hydraulic Bus-Bar Bender Manual Bar Bender Free Pre-Sales Consulting / Free Sample Marking Newart Winch offer 16 hours quick pre-sales response and free consulting. Any kind of technical support are available for our customers. Free Sample Making & Testing is available. We could provide samples for free, but freight is afford by the customers. 7-15 Working Days Quick Delivery Your order is provided by us, we will try our best to make quick

Model SCD-100D Portable Electric Hydraulic Bus-Bar Bender Manual Bar Bender Manual Bar Bender Application For vertical bending. Working with a manual hydraulic pump or an electric hydraulic pump. Manual Bar Bender Specification Item number 06245 06246 06245A 06246A Model SCB-100D BCB-100A SCB-120D BCB-120A Output(Mpa) 44 59 Stroke(MM) 250 320 Bending ability(MM) 40-100(Width) 4-10(Thickness) 440-120(Width) 4-12(Thickness) Bending angle(MM) 90°

Punching Of Sheet Metal Hole Punches Perforator Hydraulic Punching Tools Hydraulic Punching Tools Uses: For the panel of the switch box and so on,the surfaceof the paint will not be damaged after the perforation. Explain: The mold size can be customized according to the requirements of the user. Hydraulic Punching Tools Technical Data Item number 06241A 06241 06241B 06241C 06241D Mode SYK-8A SYK-8B SYK-15 SYK-15A SYK-15B Punching range Φ16mm- Φ51mm(5) Φ22mm- Φ60mm(5) Φ63mm-

Light weight And Compact Design High Pressure Manual Hydraulic Pump Manual Hydraulic Pump Application to provide power for the cutting tool, the hydraulic compressor, punching machine and other construction machinery, which is operated in the wild field in electric power, railway, rescue, construction and other industries. Manual Hydraulic Pump Features 1. Double loop piston 2. Iron box packing 3. Use No.15 Antiwear hydraulic oil Manual Hydraulic Pump Specificaitons Item

Portable Model CPB-1 High Quality Hydraulic Pipe Cutter for Cutting Hydraulic Pipe Cutter Application Simple operation, convenient maintenance, for construction, chemical industry, water, oil, coal and other industries to provide the ideal pipe bending tools. Rely on hydraulic cold bending operations of hydraulic tools. We offer a wide range of hydraulic pipe bending machine that are used for pipe bending purpose in various industries. It is designed for common water pipe

CH-80 Hydraulic Hole Punch Machine for Copper and Iron Busbar The CH-80 is a remote-control hydraulic hole punch machine that produces clean round holes in copper and aluminium busbar without the burrs and noise left by twist drilling. Powered by an external hydraulic pump, it develops a 500KN punching force and accepts four standard dies, so busbar fabrication can be carried out quickly on site, in a workshop, or at a location with no mains electricity when a hand or foot

YP-41 Hydraulic Nut Splitter for Seized M27-M41 Nuts The YP-41 is a hydraulic nut splitter used to remove seized, corroded or damaged nuts on transmission towers and substation equipment. It applies a 160KN controlled splitting force to crack the nut off the stud, so the bolt thread is left intact and reusable instead of being cut away. The compact 250mm body and non-conductive fiberglass handles suit maintenance work in tight tower and switchyard positions. Manufactured by

QY-48 Hydraulic Steel Wire Rope Cutter for Guy Wire and Cable The QY-48 is a hydraulic steel wire rope cutter used to cut guy wire, stay wire and steel cable during transmission line installation and maintenance. It applies a 200KN cutting force to cut steel wire rope from 10mm to 48mm in diameter cleanly, without the rope splaying and deformation that a manual cutter leaves. The forged steel cutting head and non-conductive fiberglass handles make it a practical tool for line

EPCB-401 220V Hydraulic Busbar Machine With Four Functions The EPCB-401 is a single-phase 220V hydraulic busbar machine that combines cutting, punching and bending in one worktable. Unlike a single-function tool, it lets a substation or panel workshop cut busbar to length, punch mounting holes and form bends without switching machines. The machine develops a 270KN bending force, 200-300KN cutting force and 300-350KN punching force, and supports both horizontal and erect

SWG-4 Hydraulic Pipe Bender for Conduit and Transmission Pipe The SWG-4 is a hydraulic pipe bender used to form accurate bends in conduit and pipe during power line construction and substation installation. It develops a 200 output with a 380mm stroke and bends conduit from 22mm to 108mm in diameter with a wall thickness of 2.5-6mm, through angles between 90 and 180 degrees. The bending angle is set on the tool so each piece repeats evenly without re-measuring. Manufactured

CAC-110 Hydraulic Angle Steel Cutter for Transmission Tower Construction The CAC-110 is a hydraulic angle steel cutter used on transmission tower and substation projects to cut steel angle cleanly and quickly. It produces a 350KN cutting force and cuts steel angle up to 110 x 110 x 10 mm in a single stroke, leaving a straight edge without the deformation caused by hacksaw or abrasive cutting. Non-conductive fiberglass handles and an automatic pressure relief valve protect the

CWC-200 Hydraulic Bus Bar Cutter for Copper and Aluminum Busbar The CWC-200 is a hydraulic bus bar cutter used to cut copper and aluminum busbar cleanly during substation installation, panel fabrication and electrical maintenance. It applies a 300KN cutting force through a hardened steel blade, producing a low-deformation cut on busbar up to 200mm wide without the material distortion and burrs left by sawing or shearing. The non-conductive fiberglass handles and a pressure

BCB-100A Hydraulic Busbar Bender for Copper Busbar Fabrication The BCB-100A is a hydraulic busbar bender used to form accurate bends in copper and aluminium busbar during substation and switchgear assembly. It develops a 59Mpa hydraulic output with a 320mm stroke, and bends busbar from 40mm to 120mm wide and 4mm to 12mm thick through angles between 90 and 180 degrees. The bending angle is set directly on the tool, allowing repeatable, uniform bends without pre-marking each

YJD-2000 200 Ton Hydraulic Crimping Head for Aluminium and Steel Tube The YJD-2000 is a 200 ton hexagon hydraulic crimping head built for pressing aluminium and steel tube used in power transmission, substation and heavy conductor assembly work. It is driven by a standard 80Mpa hydraulic electric pump or a gasoline pump, so the same head can be operated from a workshop power pack or from a field gasoline unit where no mains supply is available. Dies can be produced to

Split Type Hydraulic Crimper CO-630B 300KN for 630mm2 Cable Terminations When a connector has to be crimped high on a tower or deep inside a substation bay, a tool you can break down and hand up safely makes the difference. This split type hydraulic crimper separates the crimping head from the pump, so the operator positions a light head on the conductor while the heavier pump stays at a safe, comfortable height. The design has grown out of years of supporting cable

Integral Hydraulic Cable Cutter CC-50A 100KN for 50mm ACSR Power Line Work Cutting overhead conductor and armoured cable cleanly, first time, is what this integral hydraulic cable cutter is designed for. It has been shaped by years of supporting distribution and transmission line crews, who need a hand-held tool that delivers a full 100KN cut without deforming the cable or leaving burrs that later invite corona or moisture ingress. Hydraulic Cutting Force Self-contained

Integral Hydraulic Crimper YQK-120 80-120KN for 10-630mm2 Cable Terminations This integral hydraulic crimper was developed for cable jointing and termination work where a reliable, repeatable crimp matters more than speed alone. Over years of supplying line crews, substation teams, and cable contractors we have kept refining the body, jaws, and seal package so the tool holds its rated 80-120KN force through thousands of crimps on 10-630mm2 aluminium and copper conductors.

SYK-15B Hydraulic Perforator with 18 Dies for Cable Tray and Busbar The SYK-15B is a hydraulic perforator developed for punching clean round holes in cable tray, busbar and mild steel plate during power line installation and maintenance. It develops a 150KN punching force, works through plate up to 3.5mm thick, and covers a 16-114mm hole range using a set of eighteen dies. The tool connects to a standard hydraulic pump, so operators can punch accurately in the workshop or at